Moulder

LEADERMAC THUNDERMAC 923T NOT WEINIG

Condition: reconditioned (used), Leadermac Thundermac 923T Spindles: 9 x 50mm x 6000 rpm Bottom (22 kW) - Right (15 kW) - Left (15 kW) - Right (15 kW) - Left (15 kW) - Bwodoyl Rmdjpfx Anusr Top (22 kW) - Bottom (22 kW), Top (22 kW) - Bottom (22 kW). Working width: 250 mm, height: 160 mm. Max feed speed 100m/min (Possible to increase to 150m/min) Straight jointers. Profile jointers. Connection: 380 V / / 50 Hz 400 amps. Full Documentation included.

Condition: excellent (used), Four-side planer Weinig Hydromat 23C Working width: 230 mm Working height: 160 mm Number of spindles: 7 Spindle arrangement: 1. Bottom 15 kW 2. Right 7.5 kW 3. Left 7.5 kW 4. Top 15 kW 5. Bottom 30 kW (multi-blade saw) 6. Bottom 7.5 kW (hydro support) 7. Top 7.5 kW (hydro support) Spindle speed: 6000 rpm Spindle diameter: 50 mm 4 feed rollers in the worktable Feed speed adjustable via frequency inverter up to 36 m/min Bwodpfoxlcufsx Anusr Feed drive powered by cardan shaft Pneumatic pressure elements Technical documentation

Year of construction: 1990, condition: reconditioned (used), 4-sided planer unimat U23, 7 heads Bedpfx Anjpqxnxouowr 4-sided Weinig 7-head planer, 7 universal arrangement: horizontal, lower vertical, right, left, vertical, right, vertical, upper horizontal, lower horizontal, and the last universal. The drive is realized by means of cardans. The drive is secured with Rotax clutches. Pressure of the element using pneumatics. Feed smoothly regulated by an inverter. Machine feed 0-42 m/min. 2.5 kW and 7.5 kW engines. Grinding table and a new one. Additionally, new wiring and new electrics. The machine has been completely renovated. Warranty .

Condition: as good as new (ex-display), Year of construction: 2021, Number of spindles 5 St. Working width 250 mm Working height 160 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-24 m/min. control K2 Basic 7"-Touch Bwodpfx Anewgwmneuor KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER ----- LIKE NEW, showroom machine ! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 - 6,000 rpm, spindle 4.5 to 8,000 rpm - Width and height motor-controlled: left spindle radial upper spindle axial - Feed carrier motor-controlled - Additional motor-controlled positioning: right spindle radial and axial left spindle axial - working width 250 mm TECHNICAL DATA ----- Working width (perimeter of tools 163 mm) 15 - 230 mm Working height(perimeter of tools 163 mm) 10 - 150 mm (perimeter of tools 123 mm) 10 - 160 mm Min. workpiece length: single piece: min. 800 mm piece by piece: min. 300 mm The processing of the work pieces is depending on the following operating parameters: material, wood moisture, tools, diameter of the chip removal and feed speed. If necessary adjustments to the operating parameter have to be done. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 250 mm Usabale length for tools Spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 125 - 160 mm Reference cutter Diameter difference 20 - 25mm to the cutterhead Connecting piece D = 125 mm Quick action lock nut Pro-Lock 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Adjustable table plate to tool radius Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Standard profile depth 20 mm Adjustable table plate to tool radius Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Pressure shoe pneumatically, via linear guides dynamically adjustable Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle lenght minus approx. 6 mm Drive, frequency-controlled...

Condition: good (used), Year of construction: 1978, WACO HM200 UNIVERSAL, Planer-Moulder 10 spindle machine Year 9/1979 S/N 31469.708 Hydraulic feeded powerful spindle moulder. Feeding speed 0-50m/ min counter bearings on all horizontal spindles. 1. / 5. / 8./10. spindles equipped with jointer Infeeding table 200 cm Technical describtion: working capacity 200x100mm (width x hight) Spindle configuration: 1. Spindle Bottom 7,5Kw (10Hp) 2. Spindle Right 7,5kw (10HP) 3. Spindle Left kw (15HP) 4. Spindle Top, 7,5kW 5. Spindle Top, 7,5 kW 6. Spindle Right 7,5kw (10HP) 7. Spindle Left kw (15HP) 8. Spindle Top, 7,5 kW 9. Spindel Bottom, 7,5 kW 10.Spindle Bottom 10 kW Bottom spindle max tool diameter 160mm, work length 210mm Side spindles (right / left) max tool diameter 200mm, work length 110mm Top spindles max tool diameter 225mm, work length 210mm Bwjdpfxoiz Tzxj Anujr Spindle diameter 45mm Pneumatic pressure rolls ?? L x W x H = Weight 10 t

Year of construction: 1995, condition: ready for operation (used), For sell we have whole line. System TM Bison loading machine Weinig Hydromat H 22 B year 1989 System TM Angus unloading 450 - 2500mm lenght Bwjdpfxstqdfis Anuor 20 - 80 mm height 45 - 160 mm width

Condition: new, Year of construction: 2026, overall weight: 5,500 kg, fuel type: diesel, tank capacity: 1,000 l, color: red, power: 400 kW (543.85 HP), output current: 720 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 440 kW (598.23 HP), nominal power (apparent): 500 kVA, total length: 4,450 mm, total width: 1,600 mm, total height: 2,550 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Perkins, type of cooling: water, Are you looking for a professional energy storage solution for industry, commerce, agriculture, photovoltaic systems, or emergency power supply? With the APS battery storage system, Albari Power Systems GmbH offers a high-quality and scalable energy storage system for demanding applications. Technical data: * Storage capacity per unit: 233 / 254 / 440 kWh * Power: 115 / 125 / 220 kWp * Lithium iron phosphate technology (LFP) * High-quality battery modules based on CATL technology * Liquid-cooled battery system * Integrated battery management system (BMS) * Suitable for indoor and outdoor installation * Expandable to larger storage systems up to 2 MWh per application Areas of application: * Self-consumption optimization * Peak shaving (load peak reduction) * Electricity cost reduction * PV surplus storage * Emergency and backup power supply * Industrial and commercial enterprises * Agriculture * Charging infrastructure * Municipal utilities and energy suppliers Optionally available: * APS Energy Management System (EMS) * Island operation / microgrid solutions * Integration of photovoltaic systems * Integration of diesel generators * Integration of charging infrastructure / charging stations * Remote monitoring and energy management * Container solutions up to several MWh per unit Your advantages: ✓ High safety thanks to LFP cell technology ✓ Long service life and high cycle stability ✓ German EMS with high safety standards ✓ German system design by Albari Power Systems Bodpfx Anot Aa Ideuewr ✓ German system integration by Albari Power Systems ✓ Individual project planning and commissioning ✓ Service and support We will gladly create an individual concept for your application. Albari Power Systems GmbH 21376 Salzhausen Price on request according to project configuration.

Condition: excellent (used), functionality: fully functional, working width 250mm working height 140mm 8 heads 3 toothened rolls in the table before first head heads set: bottom/right/left/right/left/top/top/bottom variable regulated feeder to 100m/min spindles diameter 50mm two side bearings of spindles feeder with cardan spindles speed 6000 rpm pneumatic pressure of feeding rolls two side heads regulation two axes heads regulation Bsdpfxjww H Rws Anuswr iron cast body

Condition: like new (used), chain width: 210 mm, Conveyor chain Width 210 mm 59 links Bwodpfxoqwdvgj Anujr Interholz RAIMANN Freiburg Weinig

Condition: good (used), Year of construction: 1982, WEINIG Four side planer, 5 heads PM 17 machine no. 1329-2356 year of manufacture: 1982 planning width 170 mm planning height 120 mm 5 spindles: max. tool length 180 mm, 130 mm infeed table length 2000 mm with planer heads 6 spindles arrangement: 1 bottom 4 kW 2. right 3 kW 3. left 5,5 kW 4. top 5,5 kW 5. bottom 4 kW / universal spindle diameter approx. 35 mm infeed speed 6,5 - 49 m/min. manual lubricant pump Incl. 5 tools for all heads dimension 4500 mm x 1300 mm x H 1500 mm Weight appr. 3800 kg technical specification under subject of correction Bwjdpfjicbhvox Anuer