Edge banding machine

Lange B 590K-PUR

Year of construction: 2022, operating hours: 400 h, condition: as good as new (ex-display), functionality: fully functional, !!!Demonstration machine with low operating hours!!! Ndodpfxort Uvzo Aqwoa Model: Lepton 5100 Year of manufacture: 2022 Operating hours: approx. 400 hrs Location: D 84069 Schierling Availability: short notice Equipment: - Base machine Lepton 5100 with screen decks 1 and 2 Screen deck 1 mesh size: 36 mm Screen deck 2 mesh size: 24 mm - Pre-screen deck with large hopper and variable dosing roller - Volume measurement via load - Prepared for air separator - Compressor - LED lighting package - Radio remote control for all key settings - Diesel-electric drive 80 kW - Axle levelling system - Tandem axle, road approval for 80 km/h - 19,000 kg total weight - Transport dimensions: 11.97 m total length, 3.98 m height, 2.53 m width, no special transport permit required Possible screening materials: Compost, green waste, biomass, root wood, waste wood, municipal waste, RDF, various recyclables (not suitable for construction rubble or excavated material) Miscellaneous: Very good used condition, fully operational

Year of construction: 2000, condition: good (used), Barberan laminating line all inquiries should be directed to the number 790800714 line in continuous operation maximum lamination width - 1300mm min. gr. 3mm max. thickness 40mm maximum length of elements 2800 mm minimum length approximately 600 mm smooth speed control from the brushing machine, maximum speed 20 m / min. the line includes - automatic loading of Tommassini (out of order) - brushing machine up and down - heating lamps in front of glue rollers up and down - PVAC glue applicator - top-down drying lamps - a line of steel calenders for pressing Ndodpjilqvrjfx Aqwea - in addition, the line has a purchased crowning machine for the upper surface (working) - can be laminated on one side with PP foils

Condition: excellent (used), Year of construction: 2008, Machining center Manufacturer: Weeke Type: BHX 500 Year of manufacture: 2008 Machining dimension X: 2,500 mm Nodpfx Ash E Sghsqweda Machining dimension Y: 1,300 mm Machining dimension Z: 4 - 80 mm Number of routing heads: 2 Number of drilling heads: 2 Vertical drilling spindles: 72 Horizontal drilling spindles X: 16 Horizontal drilling spindles Y: 4 Notch saw: can be swiveled 90° Speed, X-axis: 130 m/min Speed, Y-axis: 80 m/min Speed, Z1-axis: 50 m/min Speed, Z2-axis: 27 m/min Rotational speed: 18,000 rpm Dismantled – available immediately

Condition: new, Year of construction: 2024, TECHNICAL DATA Table size 1100 x 760 mm Table height 870 mm Milling spindle non-replaceable 30 mm Clamping height 140 mm Height adjustment 125 mm Dust extraction port 2 x Ø 120 mm Speed 3000 / 4500 / 6000 / 9000 rpm Color RAL 7035 Light Gray and RAL 5000 Violet Blue Net weight approx. 800 kg TECHNICAL DESCRIPTION Robust German engineering Table milling machine with a permanently installed, single-sided swiveling milling spindle for a swiveling range of -5° to +45.5° Positioning control for height and swivel adjustment with zeroing of the height and offset dimension Electronic position and speed indicators 4 speeds 3000 / 4500 / 6000 / 9000 rpm Nedpfx Aofpb Nmoqweda Belt quick-clamping device Push buttons for spindle start and stop Left and right rotation Milling cutter quick-clamping device Finely planed gray cast iron table with rigid frame support Control panel located below on rigid frame support Milling fence 216, total adjustment via handwheel and LCD display, including cast iron fence plates and aluminum splinter guards Machine socket Lockable main switch Mechanical motor brake Milling guard and pressure device GAMMA V 1629 Arc milling fence 1639 Tapoa Milling spindle 30 mm, non-replaceable CE compliant GS tested

Condition: used, Year of construction: 2016, Angular panel saw with automatic pre-loading and twin pusher system for optimised cutting Osi Plus Numerical Control Os Labelling labelling machine with on-board graphic labelling with part drawings Label printing management software Optiplanning Cutting Optimizer Cutting length mm 4500 Cutting width mm 2200 Blade projection 95 mm Motorized rollers for lateral loading on lifting table 4500 x 2200 mm. The translation speed is 10.8 m\min (50hz) - 13.1 m\min (60hz) Automatic recognition of the lost panel (martyr panel) based on the thickness specified in the machine data Low battery stop Automatic side loading buffer. Includes: perimeter nets, double photocell, push-button panel, predisposition electric for the two motorized pre-rollers and the amplification of 4 rollers in place of the fork passages in the pre- intermediate roller conveyor Pre-loading side roller conveyor dim 3800 x 2200 mm with motorized rollers (height from the ground 325 mm) Inertial conveyor for conveying longitudinal trimmings for angular systems 4500 mm (total length 7295 mm) 3000 mm extension to the inertial conveyor to also convey transverse trimmings Ndodpfx Asuc Idxjqwea Long chute for manual conveying of cross-cut trimmings to the centralized inertial conveyor 2050 x 850 mm air curtain discharge table with wheels at the front Air generator up to 6 floors with air curtain MULTIPUSHER 2.4 system with automatic lubrication Additional mobile lateral aligner on the transverse plane. The presence of this device allows to reduce from 1830 to 1220 mm is the minimum length of the panels that must be sent for cross-sectioning. Automatic blade shaft bending detection device for angular systems (longitudinal and transversal) consisting of a sensor that detects the deflection directly on the blade shaft and a device that detects the revolutions blade directly on the spindle. Remote cycle start button panel Automatic panel loading via rear lifting table Automatic double aligner with pneumatic cylinders Additional movable lateral aligner on the transverse plane Main blade, max diameter mm, KW 15 Scoring blade, max diameter mm, KW 2.2 Blade carriage speed 1-140 m/min. – BRUSHLESS motors Longitudinal pusher carriage speed 90 m/min. Cross pusher carriage speed 135 m/min. Double pusher carriage with 6 grippers on the longitudinal carriage + 10 grippers on the transverse carriage (8 fixed grippers + 2 on the multi-push system) Cutting system for thin panels

Condition: used, machine/vehicle number: 007227, Position 1: Single Edgebanders HOMAG + LIGMATECH-KAL 310 + ZHR 05 Ndsdpfswuuc Ajx Aqwsa Position 2: Panel Return Systems HOMAG + LIGMATECH-KAL 310 + ZHR 05

Condition: excellent (used), Briquetting machine POR Oscar 9kW Average briquette output: 130-180 kg Briquette diameter: 70 mm Motor power: 9 kW Feeding hopper diameter: 1170 mm Technical documentation CE mark Nedexdahyjpfx Aqwsda Machine weight approx. 800 kg

Condition: new, Year of construction: 2024, Osama Automatic 4-Roller Glue Application Machine Model: S4R/P-1400 Automatic gluing machine with 2 motors Working width: 1,400 mm Max. pass-through height: 0 - 100 mm Speed: 22 m/min Working height: 900 mm Diameter of application rollers: 250 mm Motor power: 3 kW Electrical: 400 V / 50 Hz / 3 phase Automatic gluing machine with 4 rollers for polyvinyl acetate (PVAC), urea-formaldehyde (UF), and polyurethane adhesives, suitable for various materials such as MDF, multi-layer boards, particle boards, composites, and gypsum plasterboard. This type of gluing machine allows for precise and homogeneous dosing of adhesive, taking into account the corrugation of the rollers, which must be suitable for the respective production requirements. The heavy-duty structure and the roller cores, manufactured with greater thickness compared to earlier models, enable a high production rate without issues and bonding of materials up to 2200 mm in width. Roller removal for maintenance is straightforward, as the supports can be split in two via a simple bayonet coupling. Njdpfxou I R Ute Aqwjda The gluing machine can also be equipped with different accessories, such as an electronic speed controller, automatic roller washing device, and an automatic upper roller lifting mechanism with position display on the control panel. The S4R/P gluing machine is used in various production sectors, including construction and the manufacturing of foam panels and mattresses. Equipment: - Automatic roller cleaning - Infeed roller - Outfeed roller - Working height: 900 mm - Infeed table TRF 1400x3000 mm with PVC rollers, 60 mm diameter, 200 mm spacing - Outfeed table TDF 1400x3000 mm with disc rollers, D: 122 mm, stainless steel Location: in stock at 54634 Bitburg - Available immediately -

Condition: used, Year of construction: 2022, Overview  The GAI filler was manufactured in 2022 by the Italian company GAI. This machine is used to fill sparkling wine into cylindrical bottles from 0,2L until 1,5L. It is equipped with a rinser (air or water) 16 nozzles, 24 electropneumatic filling valves and 3 capping turrets (3 capping heads on each turret). Each capping turret has its own cap feeding and alimentation system. Dedusting unit for the corks is installed. Integrated overpressure roof with prefilters and absolute filters. This machine is sold with an automatic CIP and 2 pallets of microfiltration Win&tech. The machine is still in production and can be visited. The condition of the machine is like new, as it has only 200 working hours. Technical details  - Working direction: left to right - Capacity: - 0,187ml - 4500bph 4°C & 15°C - 0,375ml - 4500bph 4°C & 15°C - 0,750ml - 4000bph 4°C &  2900bph 15°C - 1500ml - 2000bph 4°C & 1500bph 15°C - Currently set up for: - Glass Bottles: - 0,187ml - 0,375ml Nsdpov Aag Defx Aqweda - 0,750ml - 1500ml  - Caps/Corks - Cork (boucheuse liège) - Screw cap - Decorative Cap (Champagne style) - Incl. CIP and wine filtration

Condition: excellent (used), Year of construction: 2015, I sell the 2-head UV-drying tunnel Superfici Essiccatoio UV Model: Poliedra S.Cure 1650x2 + TT1 3500. Ndedpfxoffk Etj Aqwoa Year 2015. Available immediately. Repairs needed: Display, Energy power units for each two UV-units