Planing and moulding machine Kupfermühle

Kupfermühle

Condition: excellent (used), Catalog number 7640 ADVANTAGES – Best wide-belt sander for both wet and dry wood – Ideal for processing logs, flooring, etc. – 2 sanding drums + 3 spindles – Manufactured by the German brand KUPFERMUHLE – Used sander, very good condition TECHNICAL DATA Tjdpfx Akjzx Suueied - Max. sanding width 610mm - Max. sanding height 200mm - Top: - Toothed infeed roller - Ratchets - Pressure roller - 2 toothed feed rollers - Pressure roller - 610mm sanding drum, 6-knife, 15kW - Pressure rollers - Smooth outfeed roller - Bottom: - Side pressure roller at the infeed - Guide strip - Infeed table - Toothed feed roller - 610mm sanding drum, 6-knife, 7.5kW - 2 smooth feed rollers - Side pressure roller at the outfeed - Rear: 2 side spindles + pressure rollers: 1) Vertical right 200mm, 15kW 2) Vertical left 200mm, 15kW - Vertical left spindle with electric left/right adjustment - Spindle diameter 40mm - Spindles arranged in an alternating pattern - Spindles adjustable up/down, left/right 3) Additional horizontal lower spindle 160mm, adjustable up/down + left/right, 5.5kW - Spindle diameter 35mm - At the outfeed: 2 upper metal sliding rollers, 2 lower feed rollers, rubber - Adjustable rollers in the lower table - Electric sanding height adjustment - 6 feed speeds: 12.8/16.3/20/25.6/32.6/40 m/min - Feed motor 8kW - Dust extraction port diameters: 2 x 120, 2 x 160mm - Dimensions (L/W/H): 2980x1980x1800mm - Weight approximately 3500kg Net price: 66900 PLN Net price: 15558 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: used, Year of construction: 2006, operating hours: 89,000 h, functionality: fully functional, power: 75 kW (101.97 HP), fuel type: diesel, type of cooling: air, Kaeser CSD 122 SFC screw compressor built-in inverter 2.2-10.5m3/min, 75kW, 8.5bar Manufacturer: Kaeser Type: CSD 122 SFC Year of manufacture: 2006 Operating pressure: max 8.5bar Power: 75kW Capacity: 2.2 - 10.5 m3/min Operating hours: 96244 h (Last service: 88854 h) Tedpfx Aet A Uyuekijd Inclusion dimensions: 1100 x 2200 x 1900 mm Net weight: 1600 kg

Condition: used, total width: 3,350 mm, total height: 1,500 mm, Year of manufacture: 1980 Colour: Grey Empty weight: 3.000 kg Dimensions (LxBxH): 160 x 335 x 150 cm 1e as: Single saw Todjwnh Uxspfx Akisd 2e as: Upper 3e as: Lower 4e as: Multibladesaw - Year: 1980 - Serial number: 10517 - Number of spindles [pcs.]: 4 - Max. planing width [mm]: 620 - Feed table length [mm]: 1070 - Diameter extraction nozzle [mm]: 110 - Transport dimensions: 1600mm x 3350mm x 1500mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), CATALOGUE NUMBER 7186 TECHNICAL DATA - max. planing width 510mm - max. planing height, two-sided 170mm - max. planing height, four-sided 100mm *from above: - toothed infeed roller - pawls - toothed feed roller - pressure roller - planing roller 510mm, 4-knife (2 knives installed) 4kW - smooth feed roller, outfeed *from below: - guide strip - slip roller – adjustable table with roller, up/down - planing roller 510mm, 2-knife 4kW - 2 smooth, slip rollers, adjustable Tedpjztalqofx Akied *from the rear: - 2 side spindles + pressure roller - 1) vertical right spindle 100mm 2.35kW - 2) vertical left spindle 100mm 2.35kW - spindle diameter 35mm - spindles adjustable up/down, right/left - manual planing thickness adjustment - 4 feed speed settings - feed motor 1.5kW - dimensions L/W/H 1940x1320x1140mm - weight 1330kg ADVANTAGES – ideal for processing logs, flooring, etc. – manufactured by the German brand KUPFERMUHLE – used planer, very good condition Net price: 32900 PLN Net price: 7651 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: used, Cross-cut saw motor 1.8 kW Tjdpsq Auzaofx Akisd Milling motor top 1.8 kW Milling motor bottom 1.8 kW Sliding table with Superfix manual clamp Saw blade 2 slitting discs

Condition: excellent (used), CATALOG NUMBER: 7503 TECHNICAL DATA: - max planing width 610mm - max planing height (two-sided) 200mm - max planing height (four-sided) 100mm Top: - 2 rubber feed rollers - 2 toothed feed rollers - metal feed roller - geared feed roller - pawls - pressure roller - 2 geared feed rollers - pressure roller - planing shaft 610mm, 4-knife, 7.5kW - pressure roller - smooth, metal feed roller - pressure roller - profiling shaft 7.5kW - pressure roller - rubber feed roller Bottom: - planing shaft, axis 35mm, axis length 130mm, 2.2kW - 2 guide strips - feed table - smooth feed roller - planing shaft 610mm, 4-knife (2 knives installed), 7.5kW - 2 smooth feed rollers - split, metal slip roller - side pressure roller Rear: - side spindles + 2 pressure rollers - 1) vertical right 95mm, 4kW - 2) vertical left 95mm, 4kW - spindle diameter 35mm - spindles adjustable up/down, right/left - adjustable rollers in the lower table - electric thickness setting - 6 feed speeds 7/9/11.5/14/18/23 m/min - feed motor 3.1kW - dust extraction port diameters 3x120, 3x160mm - dimensions (L/W/H) 3150x1900x1600mm - weight approx. 3500kg Tedjzr Ixcepfx Akiod ADVANTAGES: – best wide-belt planer for wet and dry wood – ideal for processing timber, flooring, etc. – additional profiling shaft and planing shaft (undercutter) – 4 horizontal planing shafts + 2 vertical spindles – manufactured by the German brand KUPFERMUHLE – used planer, very good condition Net price: 66900 PLN Net price: 15558 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to fluctuations)

Condition: used, functionality: limited functionality, input voltage: 380 V, input current: 60 A, input frequency: 50 Hz, planing width: 600 mm, total length of planing tables: 2,000 mm, total width: 1,500 mm, total height: 1,500 mm, overall weight: 3,000 kg, The machine was purchased in Germany 12 years ago. It has been regularly serviced. It was in operation for 2 years and has been idle for the last 10 years. Tjdpfx Aksz R T Rbjiod

Condition: ready for operation (used), functionality: fully functional, Cutter shaft speed: 30,000 + 4,000 rpm Milling spindle height adjustment range: 135 mm Maximum milling tool diameter: 390 mm Maximum tool clamping height: 225 mm Spindle diameter: 40 mm Milling motor: 5.5 kW Cross-cut saw speed: 3,000 rpm Cross-cut saw height adjustment: 190 mm Max. cutting height of cross-cut saw: 100 mm Max. saw blade diameter: 350 mm Cross-cut saw motor: 0.75 kW Saw blade arbor: 30 mm Todpoyync Tjfx Akied Sliding table travel: 1270 mm Length stop range: 1750 mm Weight approx.: 740 kg

Condition: ready for operation (used), Planing machine constant table Planing width max. 605 mm Planing height 2-sided 200 mm Planing height 4-sided 200 mm Feed rate 7 - 9 - 11.5 - 14.0 - 18.0 - 23.0 m/min OPTION: Feed rate up to approx. 50 m/min Motors Planing shaft, lower 7.5 kW Planing shaft, upper 11.0 kW Vertical spindle, right 11.0 kW / D 40 mm Vertical spindle, left 11.0 kW / D 40 mm 5th shaft, horizontal 15.0 kW Feed 2.4 / 3.0 kW Power 1.1 kW Planing shafts with 6 knives For feed rates up to 24 m/min, 3 knives are sufficient 3 knives are in operation, and 3 sharp knives are in reserve Additional unit: 5th working shaft, horizontal, 15 kW Tsdpfxswg S Tve Akied Outfeed unit: roller width 350 mm Machine sold in condition A, B, or C A) repaired B) repaired and with new electrical system OPTION Pre-sizing unit at the machine infeed with planing head width 200 mm and motor 3.5 kW

Condition: excellent (used), CATALOGUE NUMBER 7679 TECHNICAL DATA - max. planing width 610mm - max. planing height (two-sided) 200mm - electric adjustment of the table, up/down - max. planing height (four-sided) 100mm – Top: - toothed infeed roller - ejectors - pressure roller - 2 toothed pull rollers - pressure roller - planing roller 610mm, 4-knife, 7.5kW - pressure roller - smooth, outfeed pull roller – Bottom: - guide rail - toothed pull roller - planing roller 610mm, 4-knife, 5.5kW - 2 smooth pull rollers – Rear: - 2 side spindles + pressure roller 1) vertical right 100mm 4kW Tedpfx Ajzw Dinjkijd 2) vertical left 100mm 4kW - spindle diameter 35mm - spindles adjustable up/down, right/left - manual adjustment of planing width - 6 feed speed settings 7/9/11.5/14/18/23m/min - feed motor 3.1kW - dimensions (L/W/H) 2500x1800x600mm - weight approximately 3000kg ADVANTAGES – ideal for processing logs, flooring, etc. – manufactured by the German brand KUPFERMUHLE – 2 horizontal planing rollers + 2 vertical spindles – used planer, very good condition Net price: 56900 PLN Net price: 13233 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: used, Year of construction: 2010, functionality: fully functional, overall weight: 10,000 kg, input voltage: 380 V, Equipment: cabin, Lamellar planing machine 310 x 200 mm + saw spindle Tedpex Exbdjfx Akied

Condition: ready for operation (used), KUPFERMÜHLE – 2-sided Planer K43 Working width max. 420 mm Planing height, 2-sided max. 300 mm Feed rate 15 - 90 m/min Chip removal, lower cutterhead 15 mm Chip removal, upper cutterhead 20 mm Drive motor, lower shaft 15.0 kW Drive motor, upper shaft 22.0 kW Drive motor, scoring saw, top 7.5 kW Feed motor 7.5 kW Height adjustment 3.0 kW Total electrical power 55 kW Planer heads, aluminum, each with 8 knives D 200 mm 2 pcs Jointing device, bottom and top Overall length 2960 mm Overall width 1630 mm Table height, constant 800 mm Net weight 5300 kg Year of manufacture 1983 Last maintenance by the manufacturer 2024 Condition good This planer was originally purchased new in 1984 as a 4-sided machine. Tjdpfxezmmrds Akied However, the vertical milling units have been removed and are no longer present. OPTION: Machine with 2 vertical milling units available at an additional cost. Machine is located in a soundproof cabin. L 3.8 x W 2.4 x H 2.6 m

Condition: ready for operation (used), functionality: fully functional, Kupfermühle KH30 Four-sided planing machine with additional unit: horizontal work spindle and extraction unit 4-sided universal planing machine KUPFERMÜHLE Electrical system: 400 volts / 50 Hz / 58.5 kW Paint finish: original Reseda green RAL 6011 Motor power and arrangement (kW): bottom 7.5 / top 11.0 / vertical right 7.5 / vertical left 11.0 5th spindle, bottom: 11.0 / Feed: 7.5 / Power: 3.0 Feed speed min/max: 5 – 30 m/min Work spindles: 5 pieces Discharge/extraction port: bottom 200 / top 200 / right 160 / left 160 mm / bottom 140 mm Working width min/max: 30 mm / 310 mm Working height min/max, 2-sided: 15 mm / 300 mm Working height min/max, 4-sided: 15 mm / 180 mm (OPTION 250 or 300 mm) Key features: Constant table height Guide rail on the RIGHT Planer heads for quick change Jointing device at the bottom and top Table plates slotted for sound insulation and are replaceable Extraction unit with 2 driven rollers at the top and double-sided guided upper part Height adjustment synchronized with the base machine Machine in repaired and tested condition with functional guarantee Additional options: New paint finish Tedpfxsx Ehfcj Akied Repainting Overhaul etc.

Condition: used, Year of construction: 1994, Drying chamber / Recirculating air drying chamber / Wood drying chamber / Drying system Mühlböck QLSF External dimensions: Length: 10.3 meters Width: 4.2 meters Tsdoy Tt Eajpfx Akied Height: 4.15 meters Internal dimensions: Length: 10.1 meters Width: 3.01 meters Height: 4.0 meters Technical data: Year of manufacture: 1994 Inlet temperature: 95 degrees Fans: 7 x 0.75 kW Immediately available Location: Austria, near Ried im Innkreis

Condition: good (used), functionality: fully functional, Saw bushings DK14 Saw bushings DK16 Saw bushing DK17 Tsdpfxjxq R Rxs Akied and other accessories