Countersink (28082)

Krauskopf Durchmesser 90 mm

Condition: new, Year of construction: 2026, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ Fpjdsfy T H Ispfx Aiven 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: used, Year of construction: 1979, cutting diameter 440 mm weight of the machine ca. 780 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Fpedpfef Dwa Uex Aiven +++++

Condition: new, working length 2451 mm Working width 2170 mm Working height 800-1000 mm Haberkorn return conveyor approx. 2,451 mm x 2,170 mm ----- base frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable trestles (approx. 800mm - 1000mm) - Conveyor system for wood lengths from 300mm to 4200mm - Conveyor system for wood widths up to 240mm Roller conveyor - infeed - Continuously driven roller conveyor approx. 5 - 25m/min - Drive via gear motor 0.37kW, vertical shaft and PU round belt - Roll diameter 50mm, 240mm roll jacket length with PVC jacket - Transfer to cross conveyor by lifting - lowering the roller conveyor - Roller cover according to HBG cross conveyor - Cross conveyor with 6 traverses - Conveyor belts PVC coated (green) 50mm wide, guided in plastic tracks - Continuously driven cross conveyor approx. 5 - 20m/min - Drive via geared motor 0.37kW - Approximately 1750mm lock to lock Roller conveyor - outlet - Continuously driven roller conveyor approx. 5 - 25m/min - Drive via gear motor 0.37kW, vertical shaft and PU round belt - Roll diameter 50mm, 240mm roll jacket length with PVC jacket - Transfer to cross conveyor by lifting - lowering the roller conveyor - Roller cover according to HBG ----- Conveyor belt approx. 320mm x 3500mm Fedpfxoi Hmpie Aivspn base frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable trestles (approx. 800mm - 1000mm) - Conveyor belt for wood lengths from 300mm to 4200mm - Conveyor belt for timber widths up to 240mm - Conveyor belt on castors with brake tape - Continuously driven approx. 5 - 25m/min - Drive via geared motor 0.37kW - Tape PVC coated 260mm wide - Stop on both sides approx. 15mm ----- Steering: - Ready to plug in with its own controller and logic - Siemens PLC, 24VDC - Siemens frequency converter - Optical limit switches and emergency stop loop - Ready installed with 16A Euro plug - Connection: 400V AC, 2kW, 50Hz ----- Pneumatic: 6-8 bar, consumption approx. 16NL/min Colour: RAL 7035 light grey Basic EC Directive 2006/42/EC in accordance with 2006/95/EG Electrical Equipment (Low Voltage Directive) and 2004/108/EC EMC Directive ----- Price of the above version ex works: on request! plus packaging and transport costs ----- (Technical information according to the manufacturer without guarantee!)

Condition: reconditioned (used), Year of construction: 1999, functionality: fully functional, BM5134- Subject to confirmation and remaining unsold -> Year of manufacture 1999 (also other models available) -> medium format up to 75 x 105 cm, pile height 130 cm -> with protective housing / safety fence Reconditioned: NEW=> hydraulic cylinders, air piping, safety guards This Transomat was used for unloading a high-speed cutter ,standing on the right. Fjdpfx Aijwh Rvrjvepn The Polar Transomat automatically places split and unsplit layers on pallets while simultaneously continuing to cut - reducing production costs by 25-70% depending on the cutting programme. Thanks to the patented, movable pallet tip, the Polar Transomat achieves a particularly high level of edge accuracy. Increase in productivity: destacking simultaneously with cutting Improved quality: stacks with particularly accurate edges can be further processed directly and faster.

Condition: excellent (used), UNLOADER (SINGLE-CAGE) - Vacuum system with its pump - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels - Separated electric and command panel Fpsdpfxed Tyvxs Aiven - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) - Working capacity (cycles/min): 12-15 - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 11

Condition: used, machine/vehicle number: 008210, Max. panel width: 1000 mm Max. panel length: 2500 mm Length of conveyor: 10000 mm Introduction system: with pushers Fsdpfjx A Thwox Aivspn

Condition: reconditioned (used), working length 3600 mm Working width 1140 mm Working height 820 bis 1050 mm WEINIG RF15 Return Conveyor System ----- Suitable for use after a chamfering, planing, and milling machine with a maximum feed speed of approximately 22 m/min. For the continuous return transport of workpieces to the operator. After passing through the planer, the workpieces are transferred to a roller conveyor, where they are conveyed transversely and then taken over by a driven roller conveyor. This conveyor directs the workpieces onto a downstream longitudinal roller conveyor back to the operator and also serves as a parts buffer. Manufacturer’s technical specifications: Workpiece length: 250–3,600 mm Workpiece width: 30–230 mm Min. workpiece thickness: 10 mm Max. feed rate of the planer: 22 m/min Fjdpfexpn Tnsx Aivjpn Cross conveyor with 2 integrated roller conveyors: Cross conveyor length: 1,140 mm Constant conveyor speed: 30 m/min Max. cycles per minute: 40 Roller conveyor length: 2,200 mm Constant speed: 30 / 60 m/min Gear motor: 1 kW (1.3 PS) Operating voltage: 220/380 volts, 50 hertz Compressed air connection: 6 bar Longitudinal roller conveyor (non-driven): Length: 1,700 mm Width: 160 mm Swing-mounted, adjustable incline Special equipment: Extension of the longitudinal roller conveyor (non-driven) by 3,000 mm ----- Price of the above machine available upon request! ----- (Technical data according to the manufacturer—subject to change without notice!)

Condition: used, machine/vehicle number: 006621, Max. panel width: 1500 mm Fedpfstvrfgox Aivepn Max. panel length: 2200 mm Length of conveyor: 13500 mm Introduction system: with grippers

Condition: excellent (used), HSS saw grinder WERKO Fjdpfxoipid Ts Aivopn

Condition: new, Year of construction: 2027, DESIGN VFDK powder booths are designed as an open wall cartridge filtered for manual powder coating use from one side. Powder booths are manufactured of externally powder coated sheet metal structure with castor wheels at the ground. The system consists of filtration system with automatic cleaning, ventilation and electrical control panel. Long lasting 100% polyester cartridge filters are used for high efficiency. WORKING PRINCIPLE Air flow generated by the extraction fan carries overspray powder coating particles to the filter unit and collects them at the outer surface of the filters. Filters are cleaned by pulse valve operated pull-reverse system during the operation. Powder coatings accumulated by this way at the ground of powder booth are collected manually in the drawer and can be reused after sieving. A hopper with vibrated sieve can be added optionally for powder recycling. ADVANTAGES Saves space in the workshop Easy and fast cleaning Fedpfx Aovv H Hdjivjpn Made in Türkiye CE Mark We offer the best technical solutions and competitive prices Contact us for more information and quotations