Cylindrical Grinding Machine - Universal

KRAFT URS 1000 NC

Condition: refurbished (used), Year of construction: 2025, operating hours: 50 h, machine/vehicle number: 3018-04, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 3100 kg Overall dimensions: 230x155x170 cm Installed power: 13 kVA Customs tariff position: 8460.2920 TECHNICAL SPECIFICATIONS MAIN DIMENSIONS Distance between centers: 650 mm Grinding capacity SpW+bs: -80 Stroke: 700 LONGITUDINAL SLIDE Max stroke: SpW+50 mm Minimum automatic feed: 1.5 mm Speed: 50-5500 mm/min Reversal delay: 0-6 sec Maximum table swivel: 12°/10°/8.5°/6° Pneumatic relief for table and workhead CROSS SLIDE Max stroke: 300 mm Rapid traverse: 60 mm Plunge grinding depth in diameter: 3.4 mm Feed 1: 0.012-6 mm/min Feed 2: 0.012-1.2 mm/min Feed per pulse: 0.001-0.05 mm GRINDING WHEEL HEADSTOCK Left-side wheel, external grinding: 400x80x127 mm Drive power: 5.5 kW Peripheral speed: 35 m/s RPM: 1670/2110 min-1 Internal grinding device for belt-driven spindles, including drive unit: 1.5 kW WORKHEAD Gisdpsw T Sd Tefx Afnon Swivel range: 0-90° Continuously variable RPM: 30-1000 min-1 Internal taper: Morse 5 Collets: W-25 Drive power: 0.55 kW Maximum workpiece weight between centers: 130 kg Grinding load between centers: 100 Nm TAILSTOCK Internal taper: Morse 3 Quill stroke: 35 mm Fine adjustment for cylindricity correction: ± 40 μm TECHNICAL CHARACTERISTICS: GUARANTEED WORKING ACCURACY Straightness of the generator over 630 mm: 0.003 mm Roundness during chuck grinding: 0.0003 mm CONNECTION VALUES Maximum absorbed power: 13 kVA Maximum permitted voltage fluctuation: -15%/+10% Maximum permitted frequency variation: ± 3% Required compressed air pressure: 5 bar Unless otherwise stated or in case of error or omission, these technical details are provided without engagement.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, operating hours: 6,000 h, travel distance X-axis: 505 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 610 mm, workpiece weight (max.): 300 kg, controller manufacturer: Heidenhain, overall weight: 250 kg, table length: 920 mm, table width: 380 mm, controller model: TNC 426, feed rate X-axis: 20,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, spindle motor power: 10 W, spindle speed (max.): 18,000 rpm, spindle speed (min.): 50 rpm, table height: 1,004 mm, Equipment: documentation/manual, rotational speed infinitely variable, The machine is equipped as follows: -Tool holder: SK 30 -Tool changer with 24 places (automatic tool change) Giedpfxev A Tyqe Afnon -Coolant system -Spindle cooling -Mist extraction -Chip drawer -RENiSHAW measuring probe

Condition: used, thread dia. M3 - M12 mm 400 U/min. 25 Nm air pressure 6 - 8 bar working area Radius 1000 mm weight of the machine ca. 12 kg Demonstration machine! Pneumatically driven tapping machine for M3 - M12 thread with: - stable and flexible working arm. - 6 pcs. Quick-change chuck with slip clutch. Documentation in English !! Godefg U Smepfx Afnein optional: - Clamping table with T-slots clamping surface 900 x 600mm

Condition: used, Year of construction: 2001, DAEWOO - DOOSAN PUMA 400 LB CNC LATHE MAKE DAEWOO - DOOSAN, MADE IN KOREA MODEL PUMA 400 LB YEAR 2001 CONTROL FANUC 18 iT CHUCK SIZE 450.0 mm SWING OVER THE BED 700.0 mm SWING OVER SADDLE 480.0 mm MAX TURNING DIA. 380.0 mm BETWEEN CENTRES 2100.0 mm DRAW TUBE DIA. 117.5 mm TRAVELS: X AXIS: 362.0 mm Z AXIS: 2155.0 mm TURRET 10 STATIONS SPINDLE SPEED 20 - 2,000 rpm Giodpfxjxp Nfxe Afnsn SPINDLE BORE 132.00 mm SPINDLE NOSE A2 - 11 BEARING DIA. 180.0 mm TURRET TOOL HEIGHT 25.0 mm TURRET BAR DIA. 50.0 mm TURRET INDEXING TIME 0.25 sec FEEDRATE RAPID TRAVERSE X: 16,000 mm/min Z: 18,000 mm/min FEEDRATE CUTTING FEED X , Z: 0,001 ~ 500.000 TAILSTOCK QUILL DIA. 120.0 mm TAILSTOCK QUILL BORE TAPER MT#6 TAILSTOCK QUILL TRAVEL 120.0 mm PLUS HYDRAULIC STEADY TOOL SETTING ARM SWARF CONVEYOR TURRET TOOLING FULL SET OF MANUALS

Condition: used, Year of construction: 2001, Deckel Maho DMC 60U Hi-dyn Machining Center Condition: Used Year of manufacture: 2001 Operating hours: 56,376 Spindle hours: 26,451 Technical specifications: Travel X/Y/Z: 600 / 700 / 600 mm Motor power: 15 kW (40% duty cycle); 10 kW (100% duty cycle) Spindle speed: 18,000 rpm Tool holder: SK 40 Magazine positions SK 40: 60 Equipment: - 3D path control MillPlus IT - Horizontal double-arm tool changer - Automatic swivel milling head - Rotating safety glass - NC rotary table with pallet carrier - Rotary pallet changer - 2 pallets 630 x 500 mm Godpju Rnlusfx Afnein - Universal milling head with controlled B axis SK 40 (only in combination with SK 40 motor spindle) - Tool holder for HSK-A63 according to DIN 69893 - Electronic handwheel - Operating mode 4 extended manual intervention - Rinse gun with pump - Tool breakage control SK 40 mechanical version, range: 63...310 mm / +/- 3 mm - Intermittent chip conveyor operation - Internal coolant supply switchable from 40 bar to 80 bar

Condition: good (used), Year of construction: 2001, functionality: fully functional, Grinding wheel 508x254 (305) mm, regulating wheel 330x254 (305) mm, regulating wheel speed 0-115 rpm, grinding wheel rotation speed 45 m/sec, grinding diameter 2-150 mm, grinding wheel drive 45 kW, machine weight 6.5 tons, space requirement approx. 3.0x1.5 m Giodpfx Ajuy Ifgjfnsn The machine will be equipped with a new Siemens S7 control system with new control panel, dressing quill SS electrically controlled via servo motor. Machine will be completely checked, defective parts repaired or replaced. Various options possible (KM system, infeed/outfeed, workpiece rulers etc.)

Year of construction: 2025, condition: new, Ultrasonic bath UEC 300 is industrial solution for cleaning large and heavy parts that are very dirty. The machines contain a pneumatic elevator capacity of 200 kg. Working frequency is 28kHz with sweep technology. The machine consists of a main ultrasonic bath with three side ultrasonic piezo transducers and second, overhead bath with oil separator. Control is with high quality touch screen HMI with 3D display notifications. Complete bath is made from acid resistance stainless Giedpfx Ajgd Uifefnjn steel AISI304 thickness 2mm. ----- Characteristics : Platform size : 900x570mm Maximum load : 200 kg. Useful height : 400mm Ultrasonic power : 3kW(6kWp-p) Ultrasonic frequency 28 kHz with sweep mode Heater power : 9kW FEATURES : Touch screen 7 " with 3D notification Automatic water filling system. Automatic elevator mode work Level sensor Elevator position sensors Cover sensor Warranty : 2 years. WE HAVE AND OTHER MODELS ON STACK

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 250 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: FANUC, workpiece diameter (max.): 32 mm, rotational speed (min.): 500 rpm, rotational speed (max.): 30,000 rpm, overall weight: 1,700 kg, spindle nose: HSK-E40, number of slots in tool magazine: 48, tool length: 95 mm, tool diameter: 63 mm, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, WILLEMIN MACODEL W408 MT TECHNICAL CHARACTERISTICS : Year : 2007 CNC control : FANUC 16i-MB Number of axes : 5 Stroke X axis : 250 [mm] Stroke Y axis : 200 [mm] Stroke Z axis : 300 [mm] Traversing feeds X, Y and Z axes : 30000 [mm/min] Max. bar diameter in turning spindle : 32 [mm] Main spindle max. speed : 6000 [rpm] Main spindle max. power : 3.7 [kW] Angular C axis stroke : 360 [°] B axis swivelling stroke : 115 [°] Spindle type : HSK-E40 Min. spindle speed : 500 [rpm] Max. spindle speed : 30000 [rpm] Spindle power : 10 [kW] Tool changer magazin number of stations : 48 Max. tool lenght : 95 [mm] Max. tool diameter : 63 [mm] Lubrication tank capacity : 80 [l] Collant pump flow rate : 40 [l/min] Rated current : 25 [A] Supply voltage : 400 [V] Weight : 1700 [Kg] EQUIPMENT INCLUDED : x1 0-90° pivoting backworking unit (6th side machining) x1 backworking vice x1 RENISHAW TS27R tool probe x1 RENISHAW NC4 TX laser system for tool setting and tool breakage detection x68 type F35 turning collets x9 HSK-40E milling/turning attachments x1 IEMCA BOSS 332 E bar feeder x1 spindle chiller x1 cutting fluid chiller x1 ELBARON mist extractor x1 3-colour status lamp x1 CO2 automatic fire extinguishing system (to be checked by the purchaser with a competent body) x1 set of technical manuals Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. HERMLE , DMU , monoblock , variaxis , chiron Giedpfx Afswu Ruhsnen

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, turning length: 1,250 mm, turning diameter over cross slide: 500 mm, turning diameter: 390 mm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 450 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 1,300 mm, bar passage: 65 mm, total height: 2,700 mm, total length: 7,000 mm, total width: 3,000 mm, overall weight: 12,000 kg, Equipment: documentation/manual, Manufacturer: DMGMORI Type: CTXbeta1250TC Year of manufacture: 2008 (retrofit in 2022) Control: Siemens 840D Solutionline Number of axes: 5 axes Equipment: - automatic tool changer - swivel head as B-axis - belt filter system with internal cooling and chip conveyor - differential pressure clamping main/counter spindle - workpiece collection device - preparation for bar loader (optionally available) Technical data: Max. turning diameter 500 mm X-axis 450 mm Y-axis 100 mm Z-axis 1300 mm B axis 220 ° Spindle bore 65 mm Speed 5000 rpm Spindle power 34 kW Counter spindle speed 6000 rpm Counter spindle passage 52 mm Counter spindle power 20 kW Tool changer 24 B-axis mount HSK 63 B-axis spindle speed 12000 rpm B-axis power 22 kW Installation dimensions approx. L 7000 / W 2300 / H 2300 mm Weight approx. 8,000 kg Chip conveyor: Yes Coolant device: Yes Internal coolant supply: Yes Options: · Full cabin · NC swivel head as B-axis Gjdpfx Afeubyv Renoin · Coolant device and chip conveyor · Documentation · Geometrically within the new machine tolerances Condition: - Machine fully functional - Geometry within the manufacturer's tolerance for new machines - All wear parts replaced Retrofit 2022: - Linear guides Z1 and Z2/3 replaced - Linear guide Y-axis replaced - Main and counter spindle overhauled - Milling spindle overhauled - B-axis (bearings and clamping) renewed - sliding plates overhauled - hoses and cables overhauled, drag chains revised - cabin doors repainted, viewing windows renewed - maintenance carried out according to manufacturer's specifications

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 3595, Ladies and Gentlemen, Godpjthd Shefx Afnjin We are selling a Weiler Commodor B lathe built in 2001 with Heidenhain 3-axis digital readout. The machine has been extensively overhauled in our workshop. Among other things, the main spindle bearing and the lead/traction spindle bearing were completely renewed! Technically, geometrically and visually, the machine is in excellent condition, which you are welcome to see for yourself on site. Availability: on request Machine no. 3595 Year of construction: 2001 Center height: 180mm Center width: 1000mm spindle passage: Ø 56mm max. spindle speed: 2000 rpm Tailstock taper mount: MK4 Feed range: 0.026 - 0.888 mm/rev Possible thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.35 - 12 mm Spindle brake: switchable Connected load: 4kW Dimensions: approx. 2.2x1.5x1m (LxHxW) Weight: approx. 1.8t Further equipment and accessories: 3-axis digital display, coolant device, chuck guard, pull-out chip tray, 3-jaw chuck Röhm, 4-jaw chuck Röhm, various clamping jaws... Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul your chosen machine - On request, we can repaint the selected machine in the color of your choice E00f3g2rl - On request, you can also order additional accessories such as tools etc. directly - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation