Filling Monoblock

KOSME/KRONES 24/24/6

Condition: good (used), functionality: fully functional, Used Bottling Line | Used Beverage Line | Soft Drinks NP 625 | ASEPTIC PET BOTTLING LINE Year: 1998 - 1999 Speed: 18,000 Bph 1.5L Nlodpfxjtu Hy Ns Aa Ejk Line consisting of: SIDEL Blower Model: SBO 16/16 ROUE Number of cavities: 16 Type: rotary CHILLER AND COMPRESSOR NOT INCLUDED Preform elevator Preform rearranger PROCOMAC monoblock Type: ASECTIC Rinser Gravity filler Capper Cap type: prethreaded plastic Sleevering machine Type: rotary Long-run warehouse Steam tunnel OCME Bundler Film-throwing type OCME Palletizer Type: push type Film-laying system Pallet magazine OCME pallet wrapper

Year of construction: 2013, condition: ready for operation (used), A KHS bottle filling machine is available. Filling object material: glass, filling points: 168, filling capacity: 22000-65000 bottles/h, sterile filter: 0.2µm, max. oil content: 0.01mg/m³, max. solids content particle diameter: 10µm, min. filling capacity per filling point: 250-300l/h, filler type: pitch circle, pitch circle filler diameter: 5040mm, bottle volume: 0.33l/0.5l, bottle formats: Steini/Long Neck Pils/NRW Pils/Long Neck. Documentation available. On-site inspection is possible. Nedevcc S Nepfx Aa Eelk

Condition: good (used), Year of construction: 2015, Beer Bottling line, Made by: Framax 9-8-1 Filler, Counter pressure filler, isobaric, double pre-evacuation, Modulblock RFCI 09-08-1 DPS-C, Year: 2014, adjusted to 330 ml 0,33l, 33cl + 0,50 glass bottles, Labeller Labelling machine, self adhesive labels Nodpfxst Akdie Aa Ejlk

Condition: excellent (used), Year of construction: 2009, Used Bottling Line | Used Beverage Line | Soft Drinks NP 602 | PET BOTTLING LINE 12,000 BPH Speed: 12,000 Bph Blow molding machine SIPA Year: 2009 Number of cavities: 8 Preform elevator Preform orientator Nedpfetqfcgex Aa Ejlk Chiller Formats of 05 L - 1 L - 1.5 L Monoblock TETRA PLAST RFA-40 Year: 1995 Filling type: aseptic Cap type: prethreaded plastic 38mm Caps elevator Dryer EUROPOOL Year: 2007 Type: air blades Labeling machine KRONES Type: roll-feed Sleever machine CLEVER 2019 With Steam Tunnel Bottle rejection system FMT dryer Year: 2011 Type: air blades SMI Bundler Year: 2009 TWIN PACK handle applicator Year: 2000

Condition: used, Year of construction: 2019, Cylindroconical fermentation and storage tanks, standing on four feet, with a maximum operating pressure of 2.5 bar. The tanks are each equipped with frame and cone cooling, cleaning lines, two outlet lines (cone tip and cone wall), pressure gauge, bunghole, hose level indicator, sampling tap and temperature control. Additional title: vertical, coolable, stainless steel pressure tanks with temperature control Nlsdexf D Iaepfx Aa Esk Gross volume: 2500 l Operating pressure: 2,5 bar Operating temperature: 50 °C Height: 2800 mm Material: stainless steel 1.4301 (AISI 304) Position: standing on 4 feet Base construction: cylindroconical Features: cooling jackets, insulation (50 mm chloride-free PU foam) cleaning line, 2 outlet lines with manual valves, pressure gauge, bung apparatus, hose level indicator, temperature control, sampling tap

Condition: used, Year of construction: 2013, Overview  This complete brewhouse was manufactured between 2011 and 2013 by various European manufacturers, including spanish manufacturer SlowBeer. It is for sale as the current owner is unable to dedicate sufficient time to its operation due to other business commitments. The brewhouse is currently dismantled and stored in Spain. Optional services such as dismantling, transport, and installation are available upon request. Technical data  Brewhouse capacity: 250 liters per batch Production cycle: approx. 2 weeks per batch Bottling cycle: 1 day per batch Production months/year: 10 months Shelf life of beer: 18 months Heating method: Electric (1 Hot Liquor Tank used), Butane option available (unused) Fermentation tank capacity: 500 liters each (3 tanks) Brewing system power: 15 kW Cooling system power: 2.3 kW Labeling power: 2 kW Scope of Delivery  1 x Brewing Unit | SlowBeer | MB 250 E | 2013 1 x Plate Heat Exchanger | Sondex Italia | S4A-IG16 | 2013 3 x Fermentation Tanks | — | — | — (500 L each, atmospheric) 1 x Cooling Unit | Winus | C2-W3R 4T | 2012 1 x Isothermal Hot Water Tank | Industrias Céspedes | — | 2011 1 x Labelling Machine | CDA | R1000 | — 1 x Filling Machine | Toscana | — | — 1 x Manual Capping Machine | — | P0085 | — 1 x Coder | — | MC150V | 2013 1 x Electric Mill | SOMMER | 11717 | — 1 x Compressor | FINI | — | — 1 x Compressor | MADER | YL90S-2 | 2012 (100 L tank) 1 x Steel Water Heating Tank | — | — | — (900 L) 2 x Water Softeners | — | — | — 2 x Hot Liquor Tanks | — | — | — (1 electric, 1 butane-based – unused) Optional Services: Dismantling, transport, and installation – available upon request.   Nlodpfxjwcyc Ds Aa Eek

Condition: used, ALREADY PACKED ‼️ IMMEDIATE DELIVERY ‼️ 🔥 Several pieces of Fröling Turbomatic (TMC) wood chip boilers for sale – 35 / 48 / 55 / 110 kW outputs! 🔥 Nedpewakktjfx Aa Ejlk Quality, automated Fröling TMC series biomass boilers for sale, with different outputs. An ideal choice for families from single-family homes to small industrial facilities, where reliable, economical heating is important. ⸻ Available types: • Fröling TMC 35 kW – for smaller systems • Fröling TMC 48 kW – for medium heat demand • Fröling TMC 55 kW – larger workshop, farm • Fröling TMC 110 kW – for industrial/agricultural systems ⸻ Features: 🌲 Fuel: wood chips, pellets, shavings 🔁 Automatic operation: dosing, cleaning, ash removal 🧠 Advanced combustion control, intelligent control ♻️ High efficiency, low emissions 🇦🇹 Fröling – Austrian premium biomass technology 💥💰 Prices vary by type – inquire by phone or email! 💰💥 📍 Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) ⸻ 💼 Top Heating Systems – ProfiKazán Wide selection of used Froling boilers, with expert support.

Condition: new, Year of construction: 2025, functionality: fully functional, Labeling system for round and square canisters Stainless steel frame Nodpfxou Ia E Io Aa Ejlk 170 mm wide link chain (optionally wider possible) Standard label width 140 mm or 190 mm, optionally up to 260 mm possible Label length 300 mm, optionally longer Dispensing speed up to 30 m/min., optionally 50 m/min Product diameter according to technical testing from 20 mm - 170 mm, optionally other sizes possible Touch screen display, with storage option Label dispenser with three-dimensional adjustment option Product separation with two-sided belts Product alignment for square bottles Top belt guide for square and oval products Other labeling options, such as lid labeling, seal labeling, bottom labeling, etc.

Condition: not inspected (used), Year of construction: 2018, functionality: unexamined, PSS 35hl brewery for sale including: * Grain storage, milling and handling * 35hl brewhouse comprising mash tun, lauter tun, wort kettle, whirlpool, HLT, CLT * 18 - PSS FT-140HL fermentation vessels * Yeast tanks * 3-tank CIP plant Nlsdjv Av Anopfx Aa Eok * Centec Degas 5hl/hr de-aeration system * Romfil XFA8-B filtration unit * Centec FlashPasto 25hl/hr flash pasteuriser * 2 - 140hl bright beer tanks * Services including Certuss TC1500 steam generator, RO plant, glycol system, compressed air plant Equipment manufactured 2018, installation incomplete

Condition: used, Year of construction: 2008, Used Combiblock Sidel SBO 20 Universal 36000 bph The Used Sidel SBO 20 Universal Combiblock 36000 bph is an integrated bottling system, combining a blower and a filler/capper in a single unit. This machine is designed for the production of PET bottles, with a production capacity of up to 36,000 bottles per hour. The Sidel SBO 20 Universal blower features 20 cavities, allowing efficient and continuous production. The system includes a preform feeder with a hopper and a preform unscrambler, ensuring a constant flow of material in the production process. The Europa WM 60 filler/capper is integrated into the Combi block, optimizing space and reducing transfer times between the blowing and filling stages. This compact design improves operational efficiency and minimizes the risk of contamination. The system has been used for bottling natural mineral water in 0.5-liter formats, with a 26.6 mm Alaska-type neck customization. The machine pitch is 113 mm, adapting to specific production needs. Currently, the machine is in storage, ready to be installed and put into operation in a new production facility. A complete inspection is recommended before start-up to ensure optimal performance. The required power supply is 400 V at 50 Hz, standard in many industrial plants. The immediate availability of the Combi system represents an opportunity for companies looking to quickly increase their production capacity.   Nlodpjvgu D Sofx Aa Esk Advantages of the Combi system over a traditional system The Combi system, like the Used Sidel SBO 20 Universal Combiblock 36000 bph, offers numerous advantages over traditional systems, which use separate machines for blowing, filling, and capping. Firstly, the compact design drastically reduces the space occupied in the plant, allowing companies to optimize available space and, in many cases, reduce infrastructure costs. Moreover, the Combi system eliminates the need for intermediate conveyors and accumulation zones between stages. This layout simplification reduces maintenance costs, lowers the risk of jams or breakdowns along the production flow, and improves the overall line efficiency. The absence of intermediate steps also reduces the possibility of contamination, a priority especially in the food and beverage sector. The integrated process between blowing, filling, and capping shortens production times as the operations proceed continuously and without interruptions. This contributes to increasing the overall line speed and hourly production capacity. Higher efficiency translates not only into increased productivity but also into a significant reduction in energy consumption and operating costs. Additionally, the Combi system requires fewer personnel for line management and supervision, as a single control unit allows all operations to be monitored from a centralized interface. This simplifies operational procedures and makes quality control easier throughout the process.