Radial Drilling Machine - R 60 V

Knuth R 60 V

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 844 12 64, turning diameter over cross slide: 215 mm, spindle bore: 40 mm, turning diameter: 380 mm, center height: 190 mm, center width: 1,250 mm, quill stroke: 120 mm, total length: 3,020 mm, total width: 950 mm, total height: 1,500 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 14 rpm, overall weight: 1,850 kg, quill mount: MK 3, workpiece weight (max.): 300 kg, Trade show lathe, available from stock. After Trens filed for bankruptcy, we made an effort and had TOS and later Trens lathes completely overhauled. All machines were disassembled down to the last screw. Here is a run-through of a general overhaul at our company: 1. Machine cleaning, disassembly of the individual machine components 2. Grinding: bed, slide, cross support, spindle, tailstock quill 3. Grinding + scraping of the upper support guideways, replacement: trapezoidal screw with nut and V-ledge 4. Scraping of the guide surfaces: spindle, slide, cross support, and tailstock to geometric positions according to the accuracy report Gedpjv Hzqxefx Ahvsbw 5. Replacement: screw with nut, V-ledge, and Multifix base body for the cross support (including 2 turning tool cartridges) 6. Complete disassembly and replacement of the necessary spare parts in the lock case, threaded housing, headstock, gear box, tailstock, cross support, and upper support 7. Installation, replacement if necessary, of racks, repair of the lead screw and feed screw 8. Complete bearing replacement in all machine assemblies 9. Complete replacement of machine plates 10. Priming of the machine, sealing, sanding, polyurethane topcoat, and painting of the machine accessories - white RAL 9003, anthracite RAL 7016 11. New control cabinet with electrical components, replacement: main motor, rapid traverse motor, hydraulic pump, cabling, and LED lighting of the work area 12. Preparation of the accuracy report and the electrical test report 13. Inspection and machine acceptance at the factory All refurbished machines have a CE certificate and a 12-month warranty. CE version: - Chuck guard with limit switch - Front chip guard mounted on slide - Rear chip guard - Lead screw and feed screw covers - Brakes after emergency stop within 2 seconds Special accessories (used): - Three-jaw lathe chuck Ø 190 mm - Four-jaw lathe chuck Ø 190 mm - Three-jaw lathe chuck Ø 240 mm - Four-jaw faceplate Ø 320 mm - Support center for bed slide - Various chuck jaws (10 pieces) - Collet set Ø 2 - 25 mm with collet chuck + drawbar - Special collet set (10 pieces) with collet chuck - 4-way tool holder

Condition: used, Year of construction: 1975, Technical details: turning diameter over bed: 500 mm turning diameter over support: 260 mm turning length: 950 mm center height measured in bed: 220 mm centre distance: 1000 mm revolution per minute: 11,2 - 2240 / 24 step U/min spindle bore of work spindle: 62 mm tailstock quill adjustment:: 210 mm longitudinal feeds:: 0,045 - 1,6 mm/U - 32 step cross feed: 0,02 - 0,71 mm/U - 32 step total power requirement: 11 kW weight of the machine ca.: k.A. t dimension machine xH: 3,3 x 1,2 x 1,6 m The machine is in a very good condition (very quiet spindle run) in Leipzig. Top slide rotatable 360° 3-jaw lathe chuck Ø 315mm with jaws (inside/outside) for speed 2000 rpm. Thread cutting: metric, modular thread, inch Chip protection wall Chuck protection (mechanical) MULTIFIX steel holder with Ø 40mm drill steel holder Chip collection tray Coolant supply with pump Protective device for lead screw Machine base UVV is pre-equipped ( UVV=Accident Prevention Regulations) * Gjdpfsv A Sqhsx Ahvebw

Year of construction: 2018, condition: like new (used), Dumeta welding rotary table hydraulic height adjustable 500 Kg load capacity welding turntable height adjustable with through hole 100 - 200mm plate diameter 700mm Height horizontal min. 0,6m, max. 1,2m Gbjdpfx Aehua Dqshvow height tilted min. 0,40m, max. 1,0m speed from 0,11 - 1,25 rpm Weight 750 Kg Tilt up to 135 hand and foot remote control with speed indicator very robust

Condition: like new (used), Year of construction: 2000, Welding turntable Heinrichsglück 15 tons load capacity Condition as new complete with accessories hand remote control, foot remote control, manual, documents, electrical plans everything available Gbjdshcbmpspfx Ahvew dimensions: Diameter of the clamping disk 2200 mm Height tilted to the middle 1450 mm Height horizontal 1800 mm speed 0,025 to 1,1 rpm Tilting range 0 to 135 Length 3400 mm Width 1800 mm plus 300 mm Dead weight 8000 Kg

Condition: new, Year of construction: 2024, Protec KT 10000 Welding Positioner Complete set with handheld remote control 10,000 kg load capacity Clamping plate diameter: 2000 mm Tilted height to center: 1600 mm Horizontal height: 1920 mm Gjdpfx Ahjid Szvjvsbw Stepless speed from 0.01 to approx. 0.35 rpm (higher speeds possible) Tilting up to 120° Length: 2800 mm Width: 1920 mm Foot remote control available for an additional €390

Condition: used, Technical details: turning diameter over bed: 560 mm turning diameter over support: 300 mm turning length: 2000 mm centre height: 250 mm support travel z-axis: quer: 300 mm support travel x-axis: längs: 2000 mm spindle passage: Ø 65 mm turning dia. in gap: 700 mm length of gap: 300 mm range of revolution per miute: 16...1250 / 23 step U/min range of feed in x - axis: 0,028...5 m/min tailstock quill taper MT: 5 tailstock quill adjustment:: 260 mm total power requirement: 11,0 kW weight of the machine ca.: 3,5 t dimension machine xH: 3,8 x 1,3 x 1,4 m other features: -3 jaw lathe chuck Ø 315mm -Disposes of a cross slide and a top slide (top slide with tool holder for quadruple clamping) -cooling system -moving tip MK5 in the tailstock - chuck protection cover -ruler for conical turning - manual route control (via limit switch) Gedpfou Ix Emex Ahvobw Accessories: 1x steady rest Ø 200mm closed *

Year of construction: 1990, condition: used, machine/vehicle number: xxxx; Lg-Nr. 17250, Technical data: -Load capacity 200 kg -Throat depth 800 mm -Working height in horizontal position approx. 1000 mm Gbjdpfxodd Ilxs Ahvow -Mot boom. left + right swivel - arm arm manually Tiltable -Mot face plates. left + right rotatable - faceplate speed infinitely variable - faceplate diameter 300 mm - adjustable control panel with control make ESAB, - type 6 PTF, BJ. 97 - space requirement approx. B 1100 x H 1300 x T 1600 mm -Weight approx. 300 kg

Condition: used, Year of construction: 1975, Technical details: turning diameter over bed: 400 mm turning diameter over support: 220 mm turning length: 1100 mm centre height: 180 mm spindle passage: Ø 45 mm range of revolution per miute: 31,5 - 1.400 / 12 step U/min range of feed in x - axis: längs: 0,08 - 1,10 m/min range of feed in y - axis: quer: 0,028 - 0,40 m/min tailstock quill taper MT: MK4 tailstock quill adjustment: 200 mm total power requirement: 4,0 kW weight of the machine ca.: 1,7 t dimension machine xH: 2,5 x 1,1 x 1,4 m Equipment: -Three-jaw chuck Ø 250mm manufacturer Forkardt with interchangeable jaws -Multifix steel holder -Cooling water device with pump -chuck guard -chip collecting tray -chip guard Accessories: -chuck spanner -tool holder Godpeu Ix E Hefx Ahvobw -2 pieces gears *

Condition: new, The R 60 VT PRO is a high-quality radial drilling machine that belongs to the Radial Drilling Machines category, representing the latest generation of conventional radial drill presses from KNUTH. This versatile machine simplifies the machining process, supporting precise drilling, countersinking, and thread cutting—ideal for single parts and small batch productions. Built with premium cast materials, its robust design features a large column and torsion-resistant boom, ensuring stability and reliability. Key functionalities include an electronically controlled servo quill feed with a large touchscreen display, automatic thread cutting capabilities, and a powerful coolant system, all designed to streamline operations. The machine offers adjustable height for the boom, central lubrication for maintenance ease, and a variety of user-friendly interfaces for setting operating parameters. With a drilling capacity of 60 mm and throat depth from 350 to 1,600 mm, this robust and advanced radial drilling machine makes daily production tasks smoother. You can request a quote or order online to enhance your machining capabilities with the R 60 VT PRO. Gbsdpju E Hzwofx Ahvjw

Condition: new, High quality pillar drilling machine with a top equipment. FLOTT SB 30 MV Plus R2 (230.506) Standard equipment: - Main switch - Thread cutting device - Control panel with OLED display - Robust, high quality drill head hood with ergonomically inclined front - LED illumination - Quickly adjustable and ergonomic drill depth stop - Infinitely variable speed control via central rotary knob - Emergency stop button - Thermal overload protection - Spindle stop - Drill protection with electrical fuse - Connection cable with CEE plug - 3 years warranty for one-shift operation - Mechanical feed of Z-axis incl. electromagnetic clutch for (3) feed speeds - Drilling cross with pushbutton (on/off) for feed rate - In tapping mode: right-left release via drill cross pushbutton or optional foot switch Speed versions: Art.No.: 230.505 R1 (0-1.000 1/min, 100 Nm) Art.No.: 230.506 R2 (0-1.600 1/min, 70 Nm) Art.no.: 230.507 R3 (0-4.000 1/min, 200 Nm) Technical data: Continuous/normal drilling capacity (mm): R1: 27/32 (in E335/ST60) (100) / R2: 25/30 (in E335/ST60) (70) / R3: 30/35 (in E335/ST60) (200). Tapping capacity (pitch dependent): R1: M24x3 / R2: M20x2.5 / R3: M30x3.5 Spindle: MK III drilling depth (mm): 125 throat depth (mm): 300 column diameter (mm): 125 Usable working area (W x L) (mm): 590 x 450 Gjdji Hqbcjpfx Ahvsbw Speed display: Digital Drilling depth display: Digital Drilling depth stop: with fine adjustment Table height adjustment: with rack spindle/working surface (mm): 150-700 machine dimension without packing (mm): 610 x 900 x 1.980 machine dimension with packing (mm): 670 x 1100 x 2140 Motor current 400V with frequency converter (kW): 3,0 Spindle speeds stepless (1/min): R1: 0-1000 / R2: 0-1600 / R3: 0-4000 feed (mm/rev): 0,10/0,16/0,25 weight (kg): 390 Note: For all other models, please feel free to contact us.