KIERSERLING Straightener / Polishing WRPT2

KIESERLING Bar straightener / Polishing WRPT2

Condition: good (used), Distance between centers: 1000 mm Height of centers: 175 mm Grinding length: 500 mm Maximum grinding diameter: 300 mm Godpfstt Rawjx Acwobk Working wheel dimensions (OD x ID x W): 500 x 203 x 80/100 mm Internal Morse taper: 5 Working wheel motor power: 7.5 kW Total power: 17 kW Longitudinal travel of the carriage (X-axis): 267 mm Transverse travel of the carriage (Z-axis): 650 mm CNC brand: FANUC CNC model: 16-T Rotating range: +/- 8.5º Dimensions: 2600 mm x 2300 mm x 2100 mm Approximate weight: 4200 kg

Condition: used, Year of construction: 1969, grinding height 60 mm grinding width 120 mm grinding wheel diameter 600 mm grinding length mm workpiece height 60 mm Gbsdpfst Hw N Hox Acwjk total power requirement 50 kW weight of the machine ca. 7000 kg dimensions of the machine ca. m D I S K U S (Germany) Double Side Vertical Spindle Surface Grinder, C-Frame Design, with Rotary Workpiece Feeding System and Automatic Dressing Device Model DDS 600 CR-A Year 1969 Serial-No. 6672 _____ Grinding wheels Ø x bore, each 600 mm Grinding wheels height x width, approx. 60 mm Workpiece dimensions: Grinding height x grinding width, approx. 60 x 120 mm Vertical adjustment of each grinding head 150 mm External Ø of workpiece carrier disk, approx. 810 mm Feeds of rotary workpiece feed system 14 – 145 mm/sec Grinding wheel speeds, each, infinitely variable 765 rpm (24 m/s) Grinding spindle drive, each 22 kW Total electrical load, approx. 50 kW - 380 V - 50 Hz Total weight, approx. 7,000 kg Accessories / Special Features: * Rotary workpiece feed system with infinitely variable speed adjustment prepared with workpiece carrier disk approx. dia. 800 mm with relevant workpiece shaped pockets and after the grinding the parts will be automatically sorted out and collected in a collector box. * IONIC – Size Control Unit Model Nr. 9 So with measuring probe for the ground workpieces and with signal for the hydraulic infeed of the grinding wheel when size is not in order. * Automatic Dressing Device for the grinding wheels, hydraulically operated and with the automatic return of the grinding wheels after dressing cycle to the previously adjusted position and to continue the working cycle. Dressing cycle can be presetted by a timer or a manual release. * Manually operated infeed device of the Spindle slide to optimal workpiece thickness. * Spindle drives controlled by Ampere-Meters. * Separate switch cabinet. * Separate hydraulic unit. * Various carrier disks, etc. * Safety covers. * Central lubrication. * Large Coolant device with paperbandfilter This machine is ideal for double-sided simultaneous grinding of parallel workpiece surfaces by continuous method, for maximum output and accuracy in mass production (e.g. Piston rings, washers, hydraulic parts, and other punched parts.) Condition : Good . Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Year of construction: 1992, condition: used, grinding height 50 mm grinding width 120 mm grinding wheel diameter 600 mm total power requirement 85 kW weight of the machine ca. 9500 kg D I S K U S (Germany) CNC Controlled Double Sided Vertical Spindle Surface Grinder with Rotary Workpiece Feed System and IONIC Size Control Model DDS 600 III PLM - CNC Year 1992 erial No. 7924 _____ Grinding wheel Ø x bore x height, each 600 x 150 x 75 mm Approximate Workpiece dimensions: Grinding height, approx. 1.5 – 50 mm Grinding width, appox. 20 - 120 mm Vertical quill adjustment, each, approx. 150 mm Infeed of grinding wheels via CNC 0.0001 mm Feed of workpiece transportation device, infinitely variable 40 – 235 mm/sec Grinding wheel speed, each (30 m/s) 191 - 955 rpm Grinding spindle drive, each infinitely variable 37 kW Total electrical load, approx. 85 kW - 380 V - 50 Hz Weight, approx. 9,500 kg Accessories / Special Features * SIEMENS CNC Control, Model SINUMERIK 810 G, with monitor, for 4 axes i.e. * Movement of 2 spindle quills, dressing device, WP Rotation. Direct programming of Grinding Process data on keyboard. In connection with a IONIC Size Control No. 17 A / 68.000 with two tracers for measuring the thickness of the workpieces after grinding process, and corresponding infeed of the grinding wheels. Continuous display of measuring results on the monitor, with statistics, workpiece counter, etc. Digital Display Ampere for both grinding wheel drives and for grinding spindle speeds, etc. . * Positioning control device for supervising the height of the lower grinding wheel.. * Double column design as a portal for extra stability and higher accuracy * Rotary workpiece transportation device with infinitely variable feeds. The workpieces are Manually stacked in a device and forwarded by a transportation carrier disk thru the grinding wheels, there are two WP- down holders, one equipped with a overheight stop-control. * Angled grinding wheel dressing device, with automatic dressing process, Gedjt Hw Naspfx Acwobk integrated in the control as CNC axis, with safety switch-off. * Separate large switch cabinet. * Automatic central lubrication. Large pneumatic control system * Large Coolant device 6 (F) with filtering unit and magnetic separator. * Various Grinding wheels, WP transport carrier disks, 2 flanges, large Olimist separator, etc. This machine is very suitable for simultaneous double-sided grinding of large series of workpieces, e.g. punched parts, piston rings, hydraulic parts, rotors, distance rings, etc. Condition : Very good. Machine can be soon inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: good (used), cylindrical grinding machine Gbedpfx Acetrgndewok

Condition: good (used), Year of construction: 1970, Brand HILGELAND Type CH 5 ALL Year of build 1970 Serial number 5282 Electric connection 380V Dimension l 5500mm Gbjdpfsu Szucsx Acwsk Dimension w 2200mm Dimension h 1900mm (screw and rivet), capacity : M6 - M14, cutting length max. 200mm, variable speed: ... up to pieces 90 p/min, diameter 16mm

Condition: good (used), ø max. Gear 250 with 3" cutter module 5,5 hobbing length 70 cutter module 5,5 outside ø max. Acknowledged 300 mm ø spindle 85 mm ø hole table 39 mm ø table External centering Ø139,75 power tool motor (b) 4 Cv high 1.800 mm Gsdpjgq Dgdefx Acwsbk long 1.450 mm weight 2.450 Kg width 1.000 mm

Condition: used, Year of construction: 1979, cutting diameter 440 mm weight of the machine ca. 780 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Gbjdpfx Acjf Dwa Uowjk Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), functionality: fully functional, Characteristics: Distance between centers: 4500 mm Turning diameter: max. 750 mm Spindl bore diameter: 105 mm Control: Heidenhain Godpovy Adgofx Acwjbk Including 2 x chuck diameter 500 mm and 315 mm Including 2 x steady rest

Year of construction: 1971, condition: used, Technical details: max. wheel diameter: 300 mm max. module: 5 module min. : 0,5 max. workpiece weight: 60 kg weight of the machine ca.: 4,0 t dimensions of machine: 1800x1850x2500 mm dimensions electric cabinet: Nr. 1: 1930x400x1920 mm dimensions electric cabinet: Nr. 2: 800x230x1950 mm dimensions:: Abluftanlage: 1400x700x560 mm dimension cooling device LxWxH: 1,2 x 1,0 x 0,45 m Electronically controlled tooth flank grinding machine up to module 5 and a Ø of 240 - 300 mm Godpfx Ajvc Apbjcwsbk feed speed per workpiece revolution infinitely variable 0.4 - 3.2 mm max./min. Number of teeth: 130 / 12 max./min. Pressure angle: 30° / 14°30` max./min. Spiral pitch with 24 teeth: 6000 / 200 mm max. tooth helix angle, both sides: 45° Speed of the grinding worm: 1900 rpm without dressing device Equipment: approx. 77x change transmission wheels, pipe extensions and various tools Two of these machines are for sale. Both machines are supplied via two common control cabinets and an exhaust air system. *

Condition: reconditioned (used), machine/vehicle number: 550-235-ELD, GENERAL CHARACTERISTICS Gbsded Nw Ttjpfx Acwsk workpiece Ø max. 41 mm Range Module máx/min. 1,5 / 0.39 Rack face width 92 mm Manufacturing No. 550-235-ELD Máx/min. pitch form 20/40-32/64 Maximum stroke of tools trolley 760 mm Rack length máx. 610 mm ELECTRICAL CHARACTERISTICS Main motor power 15 Cv