Kent KGS 615 WMA1

Kent KGS 615 WMA1

Condition: used, greates pass round over bed 540 mm swing diameter over face slide 370 mm centre distance 3000 mm centre height 270 mm Fgodpfx Aoxnqzxokkod turning dia. in gap 815 mm bed width 344 mm spindle bore 88 mm spindle diameter in front bearing 133 mm spindle taper 11" D1 Camlock turning speed range 18-1400 U/min turning speeds 16 3-jaw chuck Röhm Ø 315 longitudinal feeds: 0,06-1,0 mm face feeds 0,03-0,5 mm metric threading 0,4-14 mm inch threading 2-72 G/1" thread - module 0,3-3,5 mm thread - DP 8-60 Pitch tailstock quill diameter 75 mm quill stroke 230 mm taper of tail spindle MK 5 slide valve travel 280 mm upper head travel 150 mm Overall size ca. 4700 x 1100 x 1400 mm weight ca. 3200 kg power capacity 9,4 kW Accessories: 2-axis digital display Fagor Röhm wedge bar chuck Ø 315 mm incl. hard base jaws and hard attachment jaws Multifix steel holder size C incl. 6 interchangeable cassettes Rotating center point Switchable lathe chuck guard 2 steady rests Chip guard Coolant device Work light Guideways in good condition without scratches, not worn Machine is in good overall condition with signs of wear commensurate with age. Includes operating instructions Translated with (free version)

Condition: used, CNC cycle-controlled turning machine HARRISON, Type Alpha 400 Plus Machine No. P30180/150 Year of manufacture 1998 Center distance 1250 mm Turning diameter over bed 400 mm Center height 200 mm Turning diameter over cross slide 245 mm Diameter in the crotch 585 mm Bed width 313 mm Cross travel (X-axis) 250 mm Tailstock quill diameter 73 mm Tailstock quill stroke 140 mm Tailstock quill taper MK 5 Spindle bore 54 mm Spindle head size Camlock D1 Size 6 Spindle speed 20-2500 rpm Spindle speed range (Stage 1) 15-275 rpm Spindle speed range (Stage 2) 35-795 rpm Spindle speed range (Stage 3) 110-2500 rpm Feed rate X and Z 0.03 - 0.6 mm/rev Rapid traverse rate X-axis max. 2000 mm/min Rapid traverse rate Z-axis max. 4000 mm/min Threading function Metric / Inch / Diametral / Module Spindle drive power 7.5 KW Power connection 400 Volt, 50 Hz, 23.5 kVA - Cycle control Harrison Alpha / GE FANUC - Language in French (France) - Automatic gear range selection in 3 stages (15-275, 35-795, 110-2500 rpm) - Electronic handwheels with different gear ratios (1/10/100) - 3-jaw scroll chuck FORKARDT Ø 250 mm Type CSN, 1 set of soft jaws - Quick-change tool holder MULTIFIX Size B with 2 inserts - 1 live center - 1 quick-change drill chuck RÖHM, 3-16 mm - Folding chuck guard - Folding work area safety doors - Chip tray with coolant system under the machine bed - Control cabinet fixed to the machine - RS 232 interface Space requirement L x W x H 2600 x 1450 x 1550 mm Fedpsh Hvk Ajfx Akkogd Weight 1950 kg Good condition

Condition: new, Year of construction: 2026, grinding length: 700 mm, grinding width: 400 mm, COSMOS E 7040 NC Precision Surface Grinding Machine, grinding area 700 x 400 x 350 mm, spindle power 3.7 kW, grinding wheel 300 x 50 x 76.2 mm, Mitsubishi PLC control and drive technology, very user-friendly, incl. magnetic chuck 700 x 400 mm with adjustable holding force, grinding spindle with speed regulation, automatic grinding cycle with rough grinding, fine grinding, spark-out and retraction, dressing with size compensation, coolant system with paper band filter. 12 months warranty. Inspection under power and test grinding possible at any time. We are happy to provide on-site installation and training as well as subsequent service! Financing / leasing available upon request – we will gladly provide an offer! Fgodpfx Akerwwt Sokjd

Condition: used, Year of construction: 2000, Kellenberger 600 U cylindrical grinding machine Condition: Used Year of manufacture: 2000 Technical data: Table: Distance between centers: 600 mm Travel: 900 mm Travel per handwheel revolution, coarse/fine: 20 / 2.5 mm Travel per division on the handwheel: 0.05 mm Speed, hydraulically continuously variable: 0.02 - 6 m/min Reversal travel, minimum: 2.5 mm Dwell time during reversal, continuously variable: 0 - 5 sec Swiveling range: 11 degrees Cross slide: Travel with feed handwheel in fine or coarse mode: 220 mm Travel per handwheel revolution, coarse/fine: 8 / 1 mm/ø Division on the handwheel: 5 µm/ø Division with micrometer adjustment: 1 µm/ø Rapid traverse, hydraulically: 40 mm Feed, hydraulically: 0.95 mm/ø Form grinding: Feed rate: 0.25 - 25 µm/sec Surface grinding: Feed increments per table reversal: 130 µm/ø Grinding spindle head: Fodpsy T E Rzjfx Akkegd Grinding wheel for external cylindrical grinding: 400 x 50 x 127 mm

Condition: good (used), Magnetic table 455 x 170 mm digital display Fgodpfx Aetu Il Tekkod water tank Honing device Wet sanding device

Condition: used, OKAMOTO ACC 52 DX SURFACE GRINDING MACHINE MAKE OKAMOTO, MADE IN SINGAPORE MODEL ACC 52 DX CONTROL AUTOMATIC TABLE SIZE 200 x 600 mm MAGNETIC CHUCK 200.0 x 500.0 mm ELECTRO MAGNETIC GRINDING WHEEL SIZE 205.0 x 19.0 x 50.0 mm TRAVERSES X AXIS: 650.0 mm Z AXIS: 230.0 mm DISTANCE GRINDING WHEEL TABLE 47.5 – 397.0 mm TOTAL POWER REQIUREMENT 2.25 kW MACHINE DIMENSIONS 2600 x 1600 x 1800 mm MACHINE WEIGHT 2,100 kgs PLUS DIAFORM WHEEL PROFILLING ATTACHMENT FAGOR DIGITAL READOUT VERTICAL HEIGHT READ OUT DISPLAY CROSS TRAVEL READ OUT DISPLAY AUTOMATIC DOWN FEED HYDRAULIC MOVEMENT COOLANT SYSTEM 200.0 x 500.0 mm FINE LOOP ELECTRO MAGNETIC CHUCK Fsdpfx Asw Elu Rekkjgd PAPER FILTRATION SYSTEM

Condition: good (used), centerless grinding machine Fedpfx Aketrguvsksgd

Condition: good (used), GENERAL CHARACTERISTICS Max. Ø to be ground 120 mm Grinding wheel width 250 mm Minimum Ø to be ground 1 mm Ø drive grinding wheel 304 mm Fgodpfx Aorpnf Aekkjd Ø working wheel 508 mm DIMENSIONS AND WEIGHT Height 1,700 mm Width 1,500 mm Length 2,750 mm Weight 4,000kg ELECTRICAL CHARACTERISTICS Grinding head motor power 15 Kw Spindle head motor power 1,8kw Hydraulic motor power 1,1kw Total power 20 kW Voltage 220/380 V

Condition: used, Year of construction: 1992, grinding length 0800 mm grinding width 500 mm workpiece height 400 mm table-size 800 x 400 mm table speeds 1 - 25 m/min Fjdpfxowgnz As Akkogd cross feed autom. 0 - 60 mm/Hub grinding wheel size 400 x 100 x 127 mm grinding spindle speed 1400/2800 U/min total power requirement 10 kW voltage 380 V weight of the machine ca. 6 t Machine has cooling arrangement, auto. vert. feed, dressing arrangement and wheel flanges. Control doesn't work continuesly !!

Condition: used, x-travel 500 mm y-travel 400 mm z-travel 400 mm Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : DECKEL MAHO CNC Universal Milling Machine model DMU 50 M year 1998 Working range: Longitudinal stroke X Axis 500 mm Vertical stroke Z Axis 400 mm Cross stroke Y Axis 400 mm C-axis – table turning, manual 360 ° B-axis – table swivelling, manual ° Table area Ø 700 x 500 mm Inclination range of table (manually) + / - ° Rotation of table (manually) 360 ° Max. Table load approx. 200 kg Fgedpjv Td Elsfx Akked Maximum distance table – spindle nose 550 mm horizontal distance machine – spindle nose 2 – 6 mm Tool holder Taper ISO 40 Spindle speeds 20 – 4,500 rpm Feed rate max. 5.000 mm/min AC main drive, 0% / 40% power-on time approx. 9 / 13 kW Total electrical load, approx. 15 kW - 400 V - 50 Hz Weight, approx. 3,000 kg Accessories / Special Features • 3 Axis HEIDENHAIN Point to Point Control Model TNC 124 with Monitor, direct programming and input of data and electronic handwheels. • All 3 axis are operated by the milling head, the table is stationary so also out of proportion workpieces can be machined. • Rotary Table can be manually rotated 360° and manually inclined + / -° (each with clamping). The digital read-out of the angles is integrated in the CNC control • Simple coolant unit with pump and tank, built-on switch cabinet (SIEMENS parts) • Pneumatic tool claomping, Some tool holders available, manuals, CE-Certificate, etc. Condition : very good condition ! Ideal for training center or single parts machining ! Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 0 % Net, after conclusion of contract, before loading We always have a large selection of milling machines - CNC or conventional - available. Please let us know your requirements.