Reheating (in metallurgical context, usually refers to the process of reheating metal to a specific

KALLFASS KFP-KFUE-

Condition: new, Year of construction: 2026, Size: 3 Nominal heat output: 87 kW -- Complies with German Federal Immission Control Act (BImSchV) Stage 2 and CE standards -- Combustion chamber completely lined with fireclay bricks Suitable for rooms of: 2,200 m³ (according to DIN) Fuel: Logs, chipboard, wood chips, wood chip briquettes Fuel consumption: 25 - 30 kg/h Blower air flow rate, free-blowing: 6,000 m³/h Outlet opening: Ø 500 mm Flue connection: Ø 200 mm Fpodpsdlhbpsfx Aikjp Weight: 1,250 kg PLC control cabinet: 380 volts

Condition: used, functionality: fully functional, empty load weight: 11,500 kg, maximum load weight: 27,500 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, first registration: 06/2014, loading space length: 13,650 mm, loading space width: 2,520 mm, loading space height: 3,150 mm, total length: 13,700 mm, total width: 2,550 mm, suspension: air, tire size: 205.65 r 17.5, ground clearance: 750 mm, color: light green, trailer brake: trailer braked, Year of construction: 2014, Equipment: ABS, Used Meusburger lowboy semi-trailer with drop-side extensions, 4 axles with steerable 3rd and 4th axles, 1st axle liftable, recesses in the platform with removable covers, extendable and height-adjustable drop sides, sliding roof cover, rear doors, provision for removable rear ramps, lateral and internal floor lashing points, anchor points for uprights with crossbars running through the platform, tarpaulins suitable for over-width loads with retractable side panels, internal height 3.10m + additional 40cm in the recesses, year 2014, rear stabilizer legs, DEALER: INTERDRIVE SRL-PARMA. Fpjdey T Rurjpfx Aikep

Condition: good (used), Year of construction: 2002, operating hours: 123 h, functionality: unexamined, heating capacity: 350 kW (475.87 HP), Mawera Type FU350RIA, fully automatic wood-fired boiler, bottom-feed firing, output: 350 kW. Hot water system, maximum flow temperature 95°C. Year of manufacture: 2002. Parts: boiler body: combustion chamber and heat exchanger, automatic feed screw, multi-cyclone, flue gas fan with piping to the chimney, operating instructions, Logic control system. Already disassembled. Viewing: possible by appointment in Budapest. Fpsdpfxswa Ax Ae Aikop

Year of construction: 2000, condition: good (used), Tank & Environmental Protection Wozniack – Certified Specialist Company according to the German Water Resources Act (WHG). Dear Sir or Madam, We offer a 30,000-liter double-walled storage tank for storing liquid fertilizers as follows: The storage tank is equipped with a brand-new, internally installed plastic liner, resistant to the storage of liquid fertilizers. An acoustic leak detection device is mounted externally in a protective box (lockable). The storage tank also has a double-walled steel construction. The plastic inner liner has a general building authority approval. It is therefore suitable and approved for storing liquid fertilizers AHL as well as NOX reduction agents AUS32/AdBlue. Nominal capacity: 30 cubic meters Quantity: 1 Used, but completely overhauled, meaning the container has been cleaned, refurbished, primed, and painted. Color: RAL paint; however, you can also specify your own color preferences at any time. Material: Steel, grade S235JRG2 Documents: Manufacturer's certificate/test certificate according to DIN 6616 D/2 and nameplate Quantity: 1 dipstick Quantity: 1 vent Quantity: 1 filling nozzle, 3 inches, V2A stainless steel, newly installed Quantity: 1 new acoustic leak detection device for the double-walled construction Quantity: 1 ladder Quantity: 1 suction line, 3 inches, V2A stainless steel, newly installed Shape: Cylindrical storage container with feet/console Container dimensions: Length: approx. 6,740 mm Diameter: approx. 2,500 mm Weight: approx. 6,500 kg Storage: Above ground Excellent offer: Liquid fertilizer – AHL tank systems in sizes from 5,000 to 100,000 liters. Water tanks, fire water tanks. Of course, you can also participate in the design of your tank system! All our systems are thoroughly inspected and checked by selected employees in our company. We also offer a cost-effective delivery upon request. Inspection of our systems is possible at any time. Other tank systems for above-ground as well as underground storage are available in all sizes and are for sale on our premises. Have we convinced you with our offer? If you have any questions or requests, please feel free to call us; one of our experienced employees will be happy to advise you. Price/Shipping The price for the tank system applies ex works Warstein, unloaded free of charge. Delivery can be offered at a reasonable cost for an additional fee. Delivery time: Immediate You will receive an invoice with VAT stated. In addition, we purchase existing tank systems and, as a certified specialist company according to the German Water Resources Act (WHG), can professionally empty, clean, dismantle, and remove them. Sincerely, from Warstein Tank & Environmental Protection Wozniack Enkerbruch 2 59581 Warstein Fodpfsc Nk Dysx Aikjpp

Condition: ready for operation (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2000 mm Feed motor 4 kW Feed speed 5-24 m/min. WEINIG Unimat 23 E Planer and moulder ----- 6 spindles (with 2 rigth spindles, reinforced motors, 8,000 rpm, ATS control Machine will be cleaned and functionally checked before delivery Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle (bottom) 5.5 kW (motor replaced) ----- Diameter 40 mm Speed ??6,000 rpm Tool swing diameter 125 - 180 mm Rebating unit including tool Hardened table insert in front of 1st (bottom) spindle 2nd spindle (right) 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter 40 mm Speed ??8,000 rpm Tool swing diameter 112-250 mm Fedpfxsxz Hh Us Aikspp Max. Tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 3. Spindle, left ----- Shared motor with 2nd spindle Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-200 mm Max. groove depth 35 mm Axially travel 80 mm Pressure shoe in front of left spindle, including spring-loaded lateral roller pressure 4. Spindle, right 8.3 kW (motor replaced) ----- Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 5. Spindle, top 7.5 kW ----- Diameter 40 mm Speed ??8,000 rpm Tool travel 112-200 mm Max. groove depth 35 mm Axially travel 45 mm Split pressure shoe in front of upper spindle, adjustable to the tool travel and pivoting away from the tool, spring-loaded. 6. Lower spindle 4.0 kW ----- Diameter 40 mm Speed ??6,000 rpm Tool travel 112-250 mm Max. groove depth 15 mm Axially travel 45 mm Spindles in general ----- All groove spindles with high concentricity. Lubrication points for the axial spindle movement. Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed infinitely variable 5-24 m/min. Feed roller in front of the first lower tool pneumatically controlled up/down, Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Adjustment travel of the feed rollers relative to the left spindle, axial 35 mm Machine electrical system ----- Operating voltage 440 V (voltage range 380 - 420 V), 50 Hz. Machine frame, tables and stops ----- Infeed table 2.0 m long (incl. jointing guide) Manual Waxilit pump for table de-resin removal One driven rubber roller (spring-loaded in the outfeed table) Two driven rollers in the machine table, hardened Machine operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Extraction after the upper spindle with mechanical digital display. ATS/System, automatic 2-axis positioning for spindles 3 and 5 Minimum working height 12 mm Electric height adjustment of the upper spindles and the feed Central lubrication points on the front of the machine Electronic digital displays on spindles 3 and 5 (axial), spindle 6 (radial) and spindle 4 (axial and radial) Safety and noise reduction ----- Full safety enclosure Easily hinged safety hood with window. Covers the ent...

Condition: used, Year of construction: 2009, heating capacity: 400 kW (543.85 HP), We offer a biomass boiler from the renowned company Kohlbach. Biomass boiler 400 kW TYPE K 8 – 400 Biomass boiler for bark, wood chips, and sawdust. Complete pump and valve set. Fjdpfxjx Daw Ue Aikepp Multicyclone Fuel feed Heat exchanger from 2009 Optional and available at extra cost: Biomass boiler with movable floor and hydraulic pump

Condition: new, Year of construction: 2026, Oy Foudila Ab is a company, in Kaskinen, Finland with over 45 years of experience in equipment for timber handling. For the past 15 years, we have also been active in pallet industry and have developed a lot of machines over the years for nailing, automatic timber feeding and stacking. We manufacture both standard machines and customized solutions for the customer's purposes. CBF Block Feeder is a flexible, compact and efficient block feeder for pallet production. User-friendly program. The machine lifts one row of blocks at a time from a stack of blocks. The machine also removes paper / cardboard automatically if it appears in the stack. The machine is controlled from a 10" touch screen. Beckhoff control system. Fpsdpfxjh Dpxdj Aikep The machine's travel length can be changed according to the customers needs to retrieve blocks from several packages/stacks. Capacity: - Approx 5 work cycles / min Machine dimensions: - Length 2000-6000mm, Width 2500mm, Height 2900mm The machines is CE-marked. The machine can be equipped with a belt conveyor and much more. For more information, pictures or videos take contact.

Condition: excellent (used), Year of construction: 2020, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 10002045, Weinig Rondamat from 2020, in very good condition. Fpjdpfxszi D Ius Aikjp

Condition: excellent (used), Year of construction: 2007, power: 1,600 kW (2,175.39 HP), Complete heating system Polzenith 1.6 Mw, 2007 The heating system consists of: - Fuel storage. Steel construction with moving floor - Scratch requirement - Electric filter Beth with electrical cabinet - Chimney 12m - All smoke lines - Complete with electrical and hydraulic system Very good facility. Fpsdpfx Aiovlkdxoksp Ready dismantled, ready for loading.

Condition: reconditioned (used), working length 3600 mm Working width 1140 mm Working height 820 bis 1050 mm WEINIG RF15 Return Conveyor System ----- Suitable for use after a chamfering, planing, and milling machine with a maximum feed speed of approximately 22 m/min. For the continuous return transport of workpieces to the operator. After passing through the planer, the workpieces are transferred to a roller conveyor, where they are conveyed transversely and then taken over by a driven roller conveyor. This conveyor directs the workpieces onto a downstream longitudinal roller conveyor back to the operator and also serves as a parts buffer. Manufacturer’s technical specifications: Workpiece length: 250–3,600 mm Workpiece width: 30–230 mm Min. workpiece thickness: 10 mm Max. feed rate of the planer: 22 m/min Cross conveyor with 2 integrated roller conveyors: Cross conveyor length: 1,140 mm Fpsdpfoxpn Tnjx Aiksp Constant conveyor speed: 30 m/min Max. cycles per minute: 40 Roller conveyor length: 2,200 mm Constant speed: 30 / 60 m/min Gear motor: 1 kW (1.3 PS) Operating voltage: 220/380 volts, 50 hertz Compressed air connection: 6 bar Longitudinal roller conveyor (non-driven): Length: 1,700 mm Width: 160 mm Swing-mounted, adjustable incline Special equipment: Extension of the longitudinal roller conveyor (non-driven) by 3,000 mm ----- Price of the above machine available upon request! ----- (Technical data according to the manufacturer—subject to change without notice!)