High speed press

KAISER V 40 W 600

Condition: used, turning diameter over cross slide: 710 mm, spindle bore: 180 mm, turning diameter: 1,000 mm, turning length: 4,000 mm, quill stroke: 250 mm, quill diameter: 125 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 6 rpm, bed width: 560 mm, overall weight: 9,700 kg, Equipment: rotational speed infinitely variable, KRAFT BV-40160 – USED HEAVY-DUTY LATHE A KRAFT BV-40160 from a company liquidation. Originally delivered to the previous owner as new from the factory in 2016/2017. On-site inspection or via video call is possible at any time. KEY FEATURES - Conventional guide and lead screw heavy-duty lathe, turning diameter 1,000 mm, distance between centers 4,000 mm - Additional guide for the tailstock on the lower machine bed - Frequency-controlled main drive 22 kW - Swiveling 4-position tool holder TECHNICAL DATA - Turning diameter over bed: 1,000 mm - Turning diameter over cross slide: 710 mm - Swing diameter in the gap: 1,280 mm, gap width 450 mm - Center height: 500 mm - Distance between centers: 4,000 mm - Bed width: 560 mm (3V + 1 flat), additional tailstock guide on the lower bed - Cross slide width: 350 mm - Spindle bore: 180 mm, spindle nose A2-15 - Spindle speeds: 4-speed, continuously variable 6-800 rpm - Main motor: 22 kW with frequency inverter - Cross movement of tailstock: 550 mm, upper slide movement: 225 mm - Tailstock quill Ø 125 mm, stroke 250 mm, taper MK 6 - Tool bit cross-section: 40 mm - Lead screw: Ø 60 mm x 2 T.P.I. - Weight: net approx. 9,000 kg / gross approx. 9,700 kg - Dimensions: approx. 5,845 x 1,950 x 1,925 mm STANDARD EQUIPMENT - Coolant system - Fixed steady rest Ø 60-380 mm - Swiveling, manual 4-position tool holder - Sliding chuck guard with electrical interlock - Swiveling, electrically interlocked guard for the upper tailstock - Traveling, rear chip / splash water guard - Halogen machine lamp - Installation / leveling elements, machine tools - German and English technical documentation, CE version - 400 V, 50 Hz, 3-phase CONDITION Used machine from a company liquidation. Sold "as is, where is", no warranty. On-site inspection or via video call is strongly recommended. OUR SERVICE Online or on-site factory inspection, transport organized on request, assembly, commissioning and operator training by our service technicians, direct German-speaking contact person for spare parts and support, member of the FDM, the trade association of the machine and tool wholesale trade. Hjdpfx Aozi Duhokiow Since this is a single item, subject to prior sale. Please call or write to us, and we will arrange an inspection appointment as soon as possible.

Condition: new, Year of construction: 2024, operating hours: 50 h, machine/vehicle number: 305, Available: February 2023 Hedpfx Ajwwq Hcekiew Control: Osai X-axis: approx. 3,100 mm Y-axis: approx. 2,100 mm Z-axis: approx. 1,000 mm A-axis: ± 115° C-axis: ± 360° Clamping table Clamping surface: approx. 3,100 x 2,100 x 213 mm Aluminum with T-slots across every 250 mm Max load: 1000kg distributed over the entire surface 2-axis milling head ST7 Spindle power: 10 kW Spindle speed: max. 24,000 min-1 Torque: 15.3 Nm Tool holder: HSK 63F Tool clamping: pneumatic Blowing air / MMS: outside Drives linear axes Feed speed X and Y axes: up to 50 m/min Z-axis feed rate: up to 30 m/min Color Housing, portal, control cabinet: light gray Z-slider and milling head: orange Additional equipment - 15-way tool changer - Control in a separate, rollable desk

Condition: good (used), Year of construction: 1954, Ref. -No.: 10576 Manufacturer: VDF WOHLENBERG Type: VDF Year of construction: 1954 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Germany Machine-No.: 27XXX Turning Length: 4000 mm Spindle Diameter: Ø 80 mm Hsdoxmd U Aopfx Akiew Faceplate Speeds I: 355 RPM Turning diameter over cross slide: Ø 1000 mm Max. Turning diameter: Ø 1250 mm

Condition: like new (used), Year of construction: 2007, Retrofitted: 2026 Hsdpfjy Nfz Sex Akijw Numerical control: HEIDENHAIN TNC-i530 Technical features Dimensions Table dimensions: 4500 x 2000 mmNumber of T slots: 11T slots dimensions: 22 mm Traverses of axis X axis traverse: 4000 mmY axis traverse: 3000 mmZ axis traverse: 1000 mmVertical capacity (VC): -50 / 950 mmDistance between columns: 2500 mm Milling head Milling head: 2 axis continuous head C5ETool clamping system: HydraulicTaper nose: ISO-50 (DIN 69871)   /   Pull stud: (DIN69872)Speed range: 4000 rpmSpindle power: 37 kW Feedrates Feedrate: 7000 mm/minRapid feedrate (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Maximum weight on table: 10000 KgMachine weight approximate: 35500 KgMachine dimensions approximate: 10923 x 6170 x 5250 mm Accessories Guarding: 2 sliding doors and new perimetral wire-mesh fenceElectronic handwheel: HR-410Coolant: external Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features

Condition: used, Year of construction: 1992, x-travel 1400 mm y-travel 1200 mm z-travel 1000 mm Control ZM total power requirement 0,5 kW weight of the machine ca. 2 t Hsdpfx Aoftfczekiew dimensions of the machine ca. 2 x 1,5 x 2 m

Year of construction: 1970, condition: used, machine/vehicle number: 12469, Hydraulic press, single-column quick-cycle press, C-column press, oil-hydraulic press Hsdpfxjb A Tcfj Akisw - Press force ram: 40 to -Clamping table: 800 x 560 mm -Insertion height: 750 mm - Projection: 300 mm -Max. Stroke: 350mm -Operation: two-handed -Dimensions: 1700/1350/H3200 mm -Weight: about 5000 kg

Year of construction: 1981, condition: used, pressure 63 t stroke 6-60 mm no. of strokes 90-550 Hub/min 300 mm table surface area 780x600 mm ram surface 807x460 mm tool hole in ram Ø 40 mm ram - range of adjustment 80 mm total power requirement 15 kW weight of the machine ca. 8 t dimensions of the machine ca. BxTxH 2900x2000x3000 m Hsdpfx Aelp U R Iskiew

Year of construction: 1994, condition: used, rd 10 - 75 mm, fl 59 x 60 mm Hsdorrmiepfx Akiew

Condition: excellent (used), Year of construction: 2019, operating hours: 7,000 h, functionality: fully functional, MACHINE CONSTRUCTION: - Cast iron bed, spindle head, and saddle system developed through computer-aided design and analysis (CAD/CAE), ensuring high rigidity and vibration damping Hodpfxozzf Rus Akiow - Fully supported table guide in every working position - X-axis (table movement) on 2 precision cylindrical roller guides, supported by 6 runner blocks each - Y-axis with 2 precision cylindrical roller guides - Z-axis with hardened and ground guideways, with TURCITE-B coating - Guideway protection via metal telescopic covers - Hydraulic counterweight / balance system - CE conformity Axes: - Preloaded ballscrews with large pitch for long-lasting precision - Digitally controlled, liquid-cooled ballscrew on the X-axis - Gear-driven ballscrews, ballscrew nuts with centralized lubrication, and lifetime-lubricated bearings CONTROLLER & ELECTRONICS + CAPACITY: - High-speed CNC, 1 ms block processing time - Storage capacity: 120 GB SSD - Technology program memory: 100 GB SSD - Number of processor cores: 4 CNC operating system: - User interface operating system: Windows 10 - Technology program storage: WINDOWS file system - Total storage capacity (system program, PLC, parameters, technology program memory) on a single SSD - New user interface (40-00005216-00w) SCREEN: Color graphical LCD touchscreen COMMUNICATION: USB, Ethernet, EtherCAT MEASURING SYSTEM: - HEIDENHAIN absolute EnDat 2.2 - PROGRAMMING: ISO, myNCT TECHNICAL DATA: - X-travel: 2100 mm - Y-travel: 1500 mm - Z-travel: 1000 mm Distance from spindle nose to table surface: 200~1000 mm Distance between columns: 1650 mm Distance between table and gantry/crossrail: 1710 mm AXES: - Rapid traverse speed X / Y / Z axis: 20 / 20 / 15 m/min - Max. working speed: 10 m/min - Motor power: 4 kW ACCURACY (according to JIS6338): - Positioning accuracy: +/- 0.01 mm (In the entire working area!) - Repeatability: +/- 0.004 mm TOOLING: - Max. tool diameter / with adjacent tool omitted: 125 / 215 mm - Max. tool length: 400 mm - Max. tool weight: 20 kg - Optional tool taper: SK50 Accessories & Equipment: - Angle head (manual) - Chip conveyor - Coolant flush gun - 15 pcs of SK50 tool holders - Machine leveling feet - Manuals The machine is in good used condition and operates accurately.

Condition: ready for operation (used), Wheel width: 600mm, module range: 2-16, cutter dimensions X/Y: 240mm/280mm, table diameter: 1020mm, speed: 200rpm, swiveling: +/-45°, max. wheel diameter with/without counterholder: 1250mm/800mm. Machine dimensions X/Y/Z: approx. 4500mm/2100mm/3300mm, weight: approx. 16200kg. An on-site inspection is possible. Hedpfoy Hk T Ijx Akiow