Butt Welding Machine

Kahramansan Teknoloji KMB5

Condition: excellent (used), HSS saw grinder VOLLMER model CMS 10M Dksdpfxei Hchdo Acnor

Condition: good (used), Remotely controlled, hydraulically operated quick-release carriage with hydraulic auxiliary carriage. Gauge: 840 mm. Control panel and electrical switchgear cabinet. Dodpfxed Nqrqe Acnjkr

Condition: used, Valon Kone VK26M With infeed and outfeed conveyors. Dodpfsvgtz Njx Acnokr

Condition: new, Year of construction: 2026, functionality: fully functional, power: 88 kW (119.65 HP), temperature: 220 °C, heating capacity: 30 kW (40.79 HP), workpiece height (max.): 1,500 mm, workpiece length (max.): 500 mm, insulation material: Steinwolle, insulation thickness: 150 mm, workpiece width (max.): 500 mm, Scope of delivery: 1. chemical pre-treatment by spraying (in cycle process) 2. dryer 3. powder coating system 4. single powder oven 5. conveyor technology, semi-automatic 6. electrical control system Hall/ floor space Floor area of the system max. 12,000 x 6,500 mm Hall floor Industrial floor Workpiece sizes Max. Part dimensions L= 500mm, H= 1,500mm, W= 500mm Range of steel parts Conveyor technology P&F chain conveyor in cycle mode, semi-automatic Pre-treatment Chemical Power supply Electricity On-site power (max. 88 kW) Gas On-site power Compressed air On-site power Water On-site power Calculation Type of system Cycle system Conveying speed 3.2 meters / min Length per cycle L = 1,600 mm Dksdpfx Aeulwg Njcner Time for cycle movement: Tm = 1.6 meters : 3.2 meters/min = 0.5 minute Time for cycle standstill: Ts = 8.5-12 minutes Total time for cycle Tt = Tm + Ts = 9-12.5 min Electrical energy: Total power 88 kW min. Average consumption 60 kWh max. average consumption 70 kWh

Condition: new, Year of construction: 2025, Butt Welding Machine Technical Specifications: Model: KAB10 CE certified Operated: Foot Power at 50% ED 10kVA, Continuous power 7.1kVA Welding Capacity: Up to 8mm + 8mm mild steel wire Dksdjtwfv Depfx Acnsr Primary winding: Copper wire Secondary winding: Copper bar Core: Silicon steel EI core Mains Connection: 400V/50Hz Power Input Cable: 3m Protection Class: IP21 Space Requirement (W/L/H): 625mm x 600mm x 1035mm Weight: 90Kg Warranty: 1 years (+10 years spare parts support)

Condition: ready for operation (used), Plant for log processing and sorting, with 2D measuring system KESAT, chain saw and loader LogLift F 165 Z. Infeed Chain conveyors, around the chain saw roller conveyors, sorting chain conveyor. Hydraulicylly driven pushing and lenght stops. Approximate dimensions 20 x 70m. Mesick 92S log measurement frame Control and evaluation PC, Win11 operating system Data output in .csv format Dkodew U Axwjpfx Acnor Manufacturer and supplier KESAT, a.s. Installation date 03/2024 LOGLIFT F 165Z - all hydraulic cylinders are refurbished.

Condition: new, Year of construction: 2026, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Dodpfx Aofz Anpjcnokr Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 1972, condition: ready for operation (used), Spindle-to-table distance min./max.: 81mm/481mm, counter support spindle center distance: 195mm, spindle head swivel: 360°, milling spindle diameter: 70mm, spindle adjustment: 100mm, headstock adjustment: 300mm, table dimensions X/Y: 480mm/820mm, travel X/Y/Z: 500mm/200mm/400mm, max. workpiece length: 400mm, spindle speed: 1600rpm, feed X/Y: 500mm/min, feed Z: 250mm/min, spindle head swivel: +/-30°, machine dimensions X/Y/Z: approx. 1600mm/2550mm/1700mm, weight: approx. 2300kg. The machine was electrically tested at the end of 2025 and a defect of the emergency stop switch was discovered. Documentation available. On-site inspection is possible. Dksdpfx Acox S Rcmonjr

Year of construction: 2021, condition: new, Aluminum inclined belt conveyor including subframe inclined section starting at 50mm (adjustable) discharge area 1500mm (adjustable) belt width 500mm (adjustable) We supply our belt conveyors in PVC, PU or rubber. PVC belt including cleats and wave edge Drive: 0.25kW motor (adjustable), speed 0.3m/sec Dksdpfx Acehh Dbasner Connection 220/240V, 50Hz, protection class IP54 Drive, etc., ready for connection, motor control optional 6 adjustable machine feet for alignment Wave edge: 40x35mm (adjustable) T-20 cleats - 400mm pitch (adjustable) 2-ply, particularly resistant to transverse forces Our core competence lies in providing customers with exactly what they need. We work together with our customers to develop customized, individual solutions and supply corresponding equipment from our own production. Contact us by phone to find a suitable solution for your application. Belt conveyor, conveyor system, discharge conveyors, belt conveyors, magnetic separators, overband magnetic separators, recycling, wood chips, plastic, metal detection (metal-free), neodymium, overband magnet, magnetic belt separator.

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, Balz BG 90 with feed block conveyor Still in use today Min. log diameter: 140 mm Max. log diameter: 900 mm Dkodpfeygli Nox Acnor Shortest wood length: 2000 mm Feed speed: 10 or 16 m/min Rotor with 5 knives