KAFO KFO 620 5AX

KAFO KFO 620 5AX

Condition: excellent (used), Year of construction: 2015, travel distance X-axis: 850 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, total length: 8,000 mm, total width: 3,325 mm, table width: 500 mm, table length: 600 mm, table load: 500 kg, overall weight: 12,000 kg, spindle motor power: 11,000 W, 5-axis CNC machine (VMC) MAZAK - VARIAXIS J600-5X MACH-ID 9484 Make: MAZAK Type: VARIAXIS J600-5X Control: MAZATROL matrix 2 Year: 2015 5 Axis Manufacturing cell with automation LANG 20 positions Renishaw 3D Taster with pre-setter ball LANG Preperation system with  vacuum 25 Units LANG pallet with vice / clamp / chucks Only 7155 Working hours ! New EUR 500.000 X - Travel: 850mm Y - Travel: 550mm Z - Travel: 510mm A - Axis: -120 to +30° B - Axis: - 120 to +30° Table Length: 600mm Table Width: 500mm Table load: 500 Lasdpfxeyyybhj An Usb Table Ø: 600mm Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Feed rate B-Axis: 30Degrees/min Spindle Taper: 40ISO/Bt/Mk Power on spindle: 11kW Speeds / ranges: 12000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 8000mm Width: 3325mm Height: 3060mm Weight: 12000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2010, x-travel 500 mm y-travel 450 mm z-travel 400 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW max. Torque 83 / 57 Nm Laodey E Tv Aepfx An Ujb tool taper SK 40 DIN 69871 table surface area 700 x 500 mm max. table load 500 kg T-slots 7x 14 x 63 mm number of toolpositions 60 pos. max. tool weight 6 kg max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm change-time tool to tool 1,6 sec change-time chip to chip 8,0 sec rapid traverse 24 m/min Feed force ( X / Y / Z ) 4,5 kN feed speeds 1 - 24.000 mm/min total power requirement 26 kVA weight of the machine ca. 4,5 t dimensions of the machine ca. 4,5 x 3,5 x 2,3 m CNC - Milling Machine Vertical DECKEL MAHO - DMU 50 - 3 Axis - only ca. 8.097h Spindle-Hrs. - Backup package for power outages - DXF import - incl. workbench - incl. tool cabinet - incl. cabinet for SK 40 tool holders - incl. approx. 63 SK 40 tool holders

Condition: excellent (used), Year of construction: 2015, operating hours: 3,900 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 3,900 h, We offer in very good condition Hurco VMX30 HSi with HSK-A63 spindle and 18k RPM. X-Axis travel: 762mm Y-Axis travel: 508mm Z-Axis travel: 610mm The machine has following options: Internal coolant 20 bar 40 Tool changer 18k RPM Spindle hSK-A63 Linear Scales Touchprobe Renishaw OMP40 Toolprobe Renishaw TS27R Ultimotion software Lajdpfxox N E H Uj An Usb Tool change optimization software Please not vices are not with sale of machine

Condition: excellent (used), Year of construction: 2011, HURCO TMX8MYS Laodsxg D A Hjpfx An Ujb H-TS8034 Year of manufacture: 2011

Condition: used, HERMLE B 300 is a 5‑axis machining center engineered for precision, high accuracy and production reliability. Working capacities: travels X 800 mm, Y 600 mm, Z 500 mm; table load max 250 kg; A‑axis ±110°; C‑axis 360°; max tool Ø 125 mm, tool length 300 mm, max tool weight 8 kg. Key specs: spindle taper HSK‑A63; spindle speed 20–15,000 rpm; spindle power 10 / 19 kW; rapid traverse 30 m/min; acceleration 5 m/s; max feed force 8,000 N; supply 3x400 V 50 Hz; total power 31 / 43 kVA; machine weight ≈ 8,500 kg. Equipment: 30‑position tool magazine, 1,000 L coolant system, BLUM tool breakage monitoring. Delivers tight tolerances; suited to automotive, watchmaking, aerospace, medical and toolmaking. Lajdpfx Anoyxnt Ao Uob

Condition: good (used), Year of construction: 2014, Technical data shown on photos. Parts shown by hand not come. Laedpfx Ajufp Svsn Usb

Condition: ready for operation (used), Year of construction: 2012, operating hours: 17,050 h, travel distance X-axis: 670 mm, travel distance Y-axis: 830 mm, travel distance Z-axis: 600 mm, overall weight: 20,000 kg, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis POSmill H 800 U was manufactured in 2012. It features a Heidenhain iTNC 530 control, a new spindle with 5,700 hours since 2021, and a robust 18,000 rpm spindle speed. The machine offers extensive travel with dimensions of 670/830/600 mm and supports 96 tool positions. Additional features include an internal coolant supply at 60 bar, a comprehensive coolant system, and a chip conveyor. Consider the opportunity to buy this POSmill H 800 U universal machining centre. Contact us for more information. Additional equipment Laedpox D Dx Ajfx An Usb • new spindle since 2021: only 5700 spindle hours (Wear-related spindle replacement) • Inspection under power possible Machine Benefits Technical Machine Benefits • Through-spindle air flow • Internal coolant supply: 60 bar • Coolant system with 1000l paper belt filter • Rotating viewing window • Chip flushing gun // bed flushing • Oil mist extraction • Blum tool breakage/measurement • Heidenhain 3d touch probe • Mobile electronic handwheel • Kinematics package Extra Information Spindle replacement due to wear (new spindle: 5600 hours since 2021) Production Hours: Control on: approximately 33300 hours, Spindle on: 17050 hours (new spindle 5600 hours, replaced in 2021 due to wear) Tool Positions: 96 Includes tool holders (shrink-fit chucks, collets, etc.)

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 10,000 rpm, spindle nose: ISO 40, number of slots in tool magazine: 30, Equipment: CE marking, chip conveyor, documentation/manual, VERTICAL MACHINING CENTER DMG MODEL DMC 635V TRAVELS: 635x510x460 mm TOOL CHANGER RANOM 30 POSITIONS SPINDLE 10,000 RPM HIGH PRESSURE THROUGH SPINDLE CHIP CONVEYOR REMOTE HANDWHEEL HEIDENHAIN HR410 Lsdjxq E Daspfx An Ujab

Condition: excellent (used), MIKRON HPM 800 U is a 5‑axis machining center for precision, high accuracy and reliability. Table 630×440 mm, 5 T‑slots, table load 800 kg; travels X800 Y800 Z550 mm; A +91/‑121°, C 360°. HSK‑A63, spindle‑nose to table 600 mm; 115 tools, Ø max 80 mm (160 free), tool length 350 mm. Spindle 0–20000 t/min; feed 0–20000 mm/min; rapid 45 m/min; accel. 6 m/s; max feed force 6000 N; 3×400V 50Hz; 55 kW; weight ~15000 kg; size 3505×3100×2980 mm. Accessories: high‑pressure coolant, paper filtration, 2 pallets, touch probe, laser tool preset, chip conveyor. Suited to tight tolerances in automotive, aerospace, medical, watchmaking. Lsdoyxn E Sspfx An Uoab

Condition: new, travel distance X-axis: 850 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 610 mm, workpiece height (max.): 450 mm, workpiece weight (max.): 500 kg, number of slots in tool magazine: 60, controller manufacturer: HEIDENHAIN, overall weight: 14,000 kg, controller model: TNC 7, coolant supply: 40 bar, spindle motor power: 32 W, rapid traverse Z-axis: 48,000 m/min, rapid traverse X-axis: 48,000 m/min, rapid traverse Y-axis: 48,000 m/min, rotary table diameter: 630 mm, rotational speed (max.): 12,000 rpm, spindle nose: SK 40 BIG PLUS (BVD 40), tool diameter: 150 mm, tool length: 300 mm, tool weight: 8 g, workpiece diameter (max.): 750 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, LAGUN EVZ 630 – 5-Axis Simultaneous Machining Center | HEIDENHAIN TNC 7 | Available on short notice New LAGUN EVZ 630 5-axis simultaneous machining center for the highest precision and dynamic performance in modern machining. The machine impresses with its robust design, high thermal stability, and state-of-the-art HEIDENHAIN control and drive technology. Ideal for tool and mold making, mechanical engineering, and demanding contract manufacturing. Your advantages at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly from JMT ✔ Financing / lease-purchase options available ✔ Compact design with high stability ✔ 24 months warranty Why LAGUN: LAGUN is one of the leading machine tool manufacturers in Spain (MAHER HOLDING) and stands for robust construction, high dynamics, and long-lasting machine concepts. The machining centers impress with their reliability, easy maintenance, and low operating costs. Technical specifications: Control: HEIDENHAIN TNC 7 CNC control HEIDENHAIN TFT screen 19" HEIDENHAIN motors, scales, and electronic handwheel HR 510 Chip disposal: Chip conveyor Enclosure: Full enclosure with automatic door opening for convenient and ergonomic access to the working area Ljdpfx Aop Nnutsn Uoab Accuracy: Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Your advantages as a JMT customer: ✔ Official LAGUN sales partner in Germany ✔ Technical support and on-site service ✔ Fast supply of spare parts ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we will be happy to advise you and prepare an individual offer.