Floor Type Boring and Milling M/C - Hor.

JUARISTI MDR 205 M CNC

Condition: excellent (used), Tacchi HD/1450 X 4M Large Spindle Bore (515mm) Year 2002 Iodpfxoxg Ivds Am Istf Siemens CNC Control Swing over bed 1450mm Swing over saddle 1000mm Hollow spindle 515mm Chucks front and rear of Headstock Speed range 1.5 – 450 rpm 15,000kg weight between centres Baruffaldi 4 way Auto Toolpost 2 x 3 point steadies

Condition: ready for operation (used), Machine was overhauled and is fully functional, with documentation. Itsdpfefw Az Uox Am Ief

Condition: used, Technical details: spindle diameter: 130 mm drill depth: 1380 mm x-travel: 2500 mm y-travel: 1600 mm z-travel: 380 mm w-axis: 900 Bohrspindelvorschub mm U-axis: 320 Planschiebervorschub mm control: auf Wunsch tool taper: ISO SK50 revolution per minute: Planschieber:4,5-180 U/min rpm - drive spindle: 4,5-900 U/min feed:: x/y: 5-2000 total power requirement: ca. 40 kW weight of the machine ca.: ca.< 35 + AZusatzeinrichtungen t The machine can be offered in 4 different sales options. Please choose! 1. the machine is in mint mechanical condition. As is/is. 2. the machine as is/is incl. plate field 4000x2000x300mm = stock no. 1101081 Isdpfxsvr S Ule Am Iotf 3. the machine is newly wired, with new electrical cabinet, digital display, with 4-axis, AC drives from Siemens, axis motors from Siemens (50A/31Nm) with 12 months warranty on all new parts. 4. further additional equipment can be offered as an option. Such as coolant system, chip conveyor, enclosure etc. We should discuss this on the table with your technical staff. i.D. *

Condition: used, Eccentric punch press HAULICK + ROOS type RVD 125 double column - eccentric press Machine No. 212560 Year of construction 1981 pressure force 125 ton. table size 880 x 800 mm table opening 470 x 140 mm column width 900 mm column width lateral 415 mm ram stroke 45 mm slide adjustment travel 0-80 mm Installation height on the picture 340 mm Stroke rate 50 to 300 strokes/min. Motor power main drive 22 kW Mains connection 380 volt, 50 Hz - Double connecting rod drive with 4-fold eccentric shaft for off-center ram pressure load - adjacent electrical cabinet - NC roll feed EBU, width 250 mm, year 2003 - adjacent control panel for roll feed - strip running direction from left to right space requirement (press) L x W x H 3000 x 2000 x 3020 mm transport height 2950 mm weight of the press approx. 11 ton. Ijdpfshlnzkex Am Ietf

Condition: like new (used), CNC vertical jig boring machine WMW MIKROMAT Travel X: 1120 mm Travel Y: 710 mm Spindle travel Z: 315 mm Travel W: 630 mm Numerical Command: CNC NUM 1060 Spindle: Ø 125 mm Cone: SA40 Itodpfx Aegy E Dpem Ijf Rotation: from 36 to 2240 RPM Table size: 1400 x 900 mm Distance between colums: 1080 mm Maxi distance spindle nose/table: from 0 to 900 mm max Maxi eligible load on table: 1000 kg max Separate electrical panel Machine renewed in 2000 with CN NUM1060 Voltage: 380 V Dimensions (L x W x H): 4000 x 2460 x 3030 mm Weight: approx. 9 T

Condition: good (used), functionality: fully functional, Characteristics: Distance between centers: 4500 mm Turning diameter: max. 750 mm Spindl bore diameter: 105 mm Control: Heidenhain Including 2 x chuck diameter 500 mm and 315 mm Including 2 x steady rest Ijdpfovy Adgjx Am Ietf

Condition: used, Radial drilling machine CSEPEL type RFh 75 / 1500 Machine no. No. 13704 Year of construction 1985 Drilling capacity in steel Ø 75 mm Drilling capacity in cast iron Ø 90 mm Spindle holder MK 5 Nominal throat depth 1500 mm Largest projection of the spindle 1500 mm (to the column) Smallest projection of the spindle 440 mm (to the column) Distance spindle nose - clamping surface 370 - 1700 mm Cantilever height adjustment 950 mm Table size / clamping surface 1800 x 1100 mm Column diameter 450 mm Pinol stroke 380 mm Spindle speed 19-1900 rpm 21 steps Feed rate 0.047-2mm/rev. 12 steps Motor power 11 kW Mains connection 380 Volt, 50 Hz, 15 kW - Clockwise/anticlockwise rotation of the drilling spindle via hand lever switch - Hydr. gear shift for spindle speed and feed speed - Hydro-mechanical central clamping Ijdolhwr Ropfx Am Ijtf - Motorized boom height adjustment - Without coolant device - Machine light - Operating instructions Space requirement: Length 2720 mm x width 1170 mm x height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons good condition

Condition: ready for operation (used), Year of construction: 2015, operating hours: 9,612 h, spindle speed (max.): 18,000 rpm, overall weight: 11,600 kg, table width: 650 mm, table length: 800 mm, travel distance X-axis: 750 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller manufacturer: HEIDENHAIN, controller model: 640, number of axes: 5, This 5-axis DMG MORI DMU 75 Monoblock was manufactured in 2015. It features an impressive X-axis travel of 750 mm, Y-axis travel of 650 mm, and Z-axis travel of 560 mm. The machine is equipped with a maximum spindle speed of 18,000 rpm and offers 60 tool positions. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 75 Monoblock universal machining centre we have for sale. Contact us for further details. • Power: 48 kVA • Rated apparent power: 35 kVA • Max input current: 70 A • Full load current: 80 A • Voltage: 400 V • Frequency: 50 Hz • Control voltage: 24 V • Spindle speed: up to 18,000 1/min • Tool interface: HSK • Tool magazine capacity: 60 positions • B-axis: -5° to +110° • C-axis: 360° • Table size: 800 mm (L) x 650 mm (W) • Machine Protection Control (MPC) • Infinitely variable speed control • Operating mode 3 Additional equipment • Scraper belt chip conveyor (chip conveyor) • Internal coolant supply • 40 bar coolant system with 600 l tank and paper belt filter • 40 bar IHK pressure relief valve • Coolant ring nozzle • Water jet gun / cleaning gun • Air cooling system through spindle center • Mechanical oil and emulsion mist separator, 3 bar Itodpfx Asyx D Dkem Ijf • Blum laser for tool radius and length measurement • Heidenhain TS 460 infrared touch probe • Handwheel • Climate control package • Documentation/manual • Preparation for automation/handling system • Extractor probe • Optional: Schunk zero point system and tools

Condition: ready for operation (used), CAP30 APPLICATOR 1000 HELICAP23: YOM 2016 VERSION 300v 15.600 RUNNING HOURS Itedpfx Aew Nqn Nom Iof PRICE 150.000 EUR FCA POLAND THE MACHINE WAS IN PRODUCTION TILL SEPTEMBER 20. EXCELLENT CONDITION EXCELLENT CONDITION, READY FOR SHIPPING

Condition: good (used), Year of construction: 2004, Machine is good working condition. Control unit Heidenhain TNC 530 Parts shown by hand not come. Iodjyufn Ijpfx Am Istf