Articulated boom lift

JLG 520AJ Valid inspection, *Guarantee! Diesel, 4x4 Dr

Condition: new, Year of construction: 2023, Sell ​​an alligator shears, metal shears for cables, pipes, profiles Max. cutting force 630 kN Cutting length 600 mm Max opening 280mm hydraulic Pressure 25Mpa Iodpfxelhrb Hj Aa Estr full cycles p. minute 7-8×/min. Power consumption 7.5 kW Weight approx. 1,400 kg Size (L×W×H) 1600×700×1300

Condition: used, Year of construction: 2016, machine/vehicle number: 0401-230047, The FICEP Tipo G31 sheet metal processing center for the economical processing of sheet steel and flat steel in steel construction and the steel trade. The Ficep Tipo G31 LG can drill, center punch, thread, countersink, mark, mill, oxy-fuel cut and plasma cut flat steel or sheet metal with a maximum sheet width of 3,100 mm and a sheet length of 14,000 mm in a single system. Ijdpforr Sqlox Aa Eotr The CNC-controlled sheet metal processing center is equipped with two 26 kW drilling units. 2 tool changers, each with 24 tool stations for ISO 40 tool holders, are available for automatic tool changes. The system is suitable for sheet sizes: Sheet width: minimum 200 mm, maximum 3100 mm; sheet length: minimum 2500 mm and maximum 14,000 mm. A powerful and modern Hypertherm HPR 400 XD plasma source is available for plasma cutting. The system also has an oxyfuel cutting unit for thick material thicknesses. The drilling unit with a high torque and a spindle speed of up to 6,000 rpm is designed for drilling with carbide tools such as solid carbide drills, Nenok Multiplex interchangeable insert tools as well as for use with HSS coolant channel drills with a drilling diameter of 10 mm to 40 mm. The Ficep Tipo G31 machine is in very good condition and has only a few operating hours.

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 500 x 310 band speed 15 - 100 m/min Itsdpofg E Hlofx Aa Esr table height 844 mm dimensions of saw-band 4250 x 34 x 1,1 mm total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 2,4 x 1,935 m ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large dimensioned wheels (520 mm) a. • Clear miter setting up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 450 mm 650x450 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 5320 x 34 x 1,1 mm total power requirement 3,0 kW Itodpsd Iipmofx Aa Ejr weight of the machine ca. 2,1 t dimensions of the machine ca. 1,9 x 2,87 x 1,3 m PROMOTIONAL PRICE!!! 2-column double miter band saw K-tech DG 62/45 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to diagonal cutting, feed regulator + cutting pressure regulator • Solid material inlet roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to diagonal cutting • Control panel ergonomic, safe and free-standing • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large-sized wheels (520 mm) a. • Clear miter adjustment up to 60° Semi-automatic function: 1. Tension the material 2. Saw starts 3. Lowering in rapid traverse to the beginning of the material or the same for series cutting cut 4. Saw blade off 5. Raise the frame until it is just above the material 6. Vice opens

Condition: used, power: 74 kW (100.61 HP), gearing type: hydrostat, fuel type: diesel, lifting height: 9,000 mm, axle configuration: 4x4, Year of construction: 2014, operating hours: 6,000 h, Equipment: all wheel drive, Drive: Wheel Empty weight: 7.980 kg Itodotr Iqcopfx Aa Ejr Make of engine: Deutz Lifting capacity: 3.200 kg Serial number: 941017 Transport dimensions (LxWxH): 4.7x2.34x2.3 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2015, operating hours: 2,434 h, machine/vehicle number: 0300212166, axle configuration: 4x4, fuel type: diesel, Equipment: all wheel drive, Drive: Wheel Itodpfxstr Itbs Aa Eer Empty weight: 10.850 kg Mast: articulated arm Lifting capacity: 230 kg Working height: 2.050 cm Max. horizontal reach: 1210 m Transport dimensions (LxWxH): 8.55x2.45x2.85 Please contact PFEIFER GROUP for more information

Year of construction: 2009, condition: good (used), Load capacity: 30 t Fine lift Lifting height 9 meters Iodpfoqiz N Rex Aa Eotr

Condition: excellent (used), mileage: 289,940 km, power: 314 kW (426.92 HP), first registration: 10/2016, fuel type: diesel, tire size: 385/65/22.5, axle configuration: 6x4, wheelbase: 3,500 mm, fuel: diesel, brakes: engine braking, color: silver, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, Year of construction: 2016, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, fridge, navigation system, parking air conditioner, parking heater, soot filter, = Additional Options and Equipment = - Power brake booster - Electrically adjustable exterior mirrors - High beam - Television - Speed limiter - Alloy wheels - Air suspension - Media system - Particulate filter - Rear-view camera - Sleeper cab - Sun visor - Auxiliary heater (parking heater) - Toolbox - Power take-off (PTO) - Central lubrication system - Towing jaw/coupling = Further Information = Ijdpfev Um Hzjx Aa Eetr Technical Data Number of cylinders: 8 Engine displacement: 16,353 cc Axle Configuration Brakes: Disc brakes Front axle: Tire size: 385/65/22.5; Alloy wheels; Max. axle load: 9,000 kg; Steering axle; Suspension: Leaf suspension Rear axle 1: Tire size: 315/70/22.5; Twin tires; Differential lock; Alloy wheels; Max. axle load: 10,500 kg; Suspension: Air suspension Rear axle 2: Tire size: 315/70/22.5; Twin tires; Differential lock; Alloy wheels; Max. axle load: 10,500 kg; Suspension: Air suspension Weights Curb weight: 16,850 kg Payload: 12,149 kg Gross vehicle weight: 29,000 kg Functional Lifting capacity: 9,715 kg Lifting height: 2,900 cm Crane: EFFER 315/6S + JIB4S, year of manufacture 2016, mounted behind the cab Condition Technical condition: Very good Optical condition: Very good SCANIA R580 V8 6X4 TRACTOR UNIT/CRANE TRUCK WITH EFFER 315/6S + JIB4S CRANE EURO 6 | PACKAGE | 580 HP DRIVE: LA6X4 HA WHEELBASE: 350 CM AIR SUSPENSION CR19H SLEEPER CAB WITH AIR CONDITIONING, AUXILIARY HEATER, REFRIGERATOR TV, MEDIA, COFFEE MACHINE 27MC RADIO, TELEPHONE REVERSING AND SIDE VIEW CAMERAS LEATHER INTERIOR AUTOMATIC TRANSMISSION TRAILER COUPLING SLIDING ROOF MULTIPLE TOOLBOXES EFFER 315/6S + JIB4S CRANE CRANE OPERATING HOURS: 5,184 6+4 x HYDRAULIC EXTENSIONS WINCH TOTAL OF 5 BOOMS CRANE CAN OPERATE IN FRONT OF THE CAB WITH 1 FRONT BOOM RADIO REMOTE CONTROL MAXIMUM LIFTING CAPACITY AT 2,700 CM: 9,715 KG MAXIMUM OPERATING HEIGHT: 2,900 CM DETACHABLE BOX: L=350 CM, W=244 CM FOLLOW US NOW ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL MÓWIMY PO POLSKU РОЗМОВЛЯЄМО УКРАЇНСЬКОЮ

Condition: new, Year of construction: 2025, Genie GS1932 E-Drive scissor lift, standardly equipped with AGM batteries etc., new, used, and demonstration machines available Itodpforhknvex Aa Eer

Condition: new, Year of construction: 2025, load capacity: 20,000 kg, 20 tons container turning device, roller stand, complete set 380 V, speed infinitely variable from 200 to 1000 mm /min. for diameters from 500mm to 4000mm roller diameter 300mm x 140 mm temperature resistance of the support rollers 100° Double drive synkron AC motor, 380V 750 W with hand and foot remote control, complete set Iedsifgu Uepfx Aa Eetr