Vertical machining center

HWACHEON VESTA-1000+

Condition: excellent (used), Year of construction: 2014, Vertical Machining Center HWACHEON Vesta-1000 10K Nodeyliknjpfx Agnjku Control: Heidenhain iTNC 620 Year of manufacture: 2014 Travel paths: X-axis: 1,000 mm Y-axis: 550 mm Z-axis: 500 mm Table size: 1,100 x 502 mm Table load: approx. 700 kg Spindle taper: BT 40 Tool magazine: 30 positions Spindle speed: 12,000 rpm Drive power: 18.5 kW Equipment Chip conveyor Electronic handwheel 4th axis

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,700 mm, travel distance Z-axis: 1,500 mm, Heidenhain 530 Diagonal milling head with 2.5° x 2.5° indexing Spindle speed up to 6,000 rpm Tool holder SK50 Internal cooling with 36 bar Nksdpfox I A Hvsx Agneu Longitudinal chip conveyor + cross conveyor

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: M281364F3ND, travel distance X-axis: 1,000 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, controller model: Siemens 828D inkl. Shopmill, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range X-axis: 1,000 mm Travel range Y-axis: 550 mm Travel range Z-axis: 500 mm Rapid traverse X/Y: 36 m/min Rapid traverse Z: 30 m/min Feed rate: 24,000 mm/min Spindle speed range: 12,000 rpm Number of tools in magazine: 24 pcs Tool holder: BT 40 MACHINE DETAILS Control: Siemens 828D incl. Shopmill Machine weight: approx. 6.5 t Nksdpfx Ajygxkmegneu EQUIPMENT Hinged belt chip conveyor Internal coolant supply up to 30 bar

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Including 4th axe TSUDAKOMA . Cooling threw spindle 30 bar. Control Fanuc 0i-MD. Including probes. Axes ( X/ Y/ Z ) mm 1.000 / 550 / 500 Table 1.100 x 502 mm Table loading kg 700 Spindle revolutions 12.000 rpm Spindle BT40 Number of tools 24 Machine dimensions mm 3.335 x 2.200 x 2.670 Weight kg 6.500 Nkjdpfx Agoycg Npjnju control - Fanuc 0i-MD

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 3806, grinding length: 600 mm, grinding width: 250 mm, grinding wheel diameter: 250 mm, grinding spindle speed: 3,000 rpm, power: 3.5 kW (4.76 HP), Equipment: rotational speed infinitely variable, JUNG JF520 - workshop overhauled Mechanically and electrically inspected and function tested by our JUNG specialists Wear parts replaced Geometry overhauled according to the JUNG new machine protocol - Grinding area: 600 x 250 mm Nkedpfxjwz Hf No Agnou - Stepper motor feed - 3-axis HEIDENHAIN digital readout - Dressing compensation - Magnetic force control - Automatic central lubrication - Used magnetic chuck - Used paper band filter 6 weeks parts warranty Delivery time: short notice We are happy to accept your used JUNG grinding machine in part exchange.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 400 h, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, controller model: Siemens 828D, spindle speed (max.): 12,000 rpm, The machine spindle was replaced in 2022! TECHNICAL DETAILS Travel X-axis: 1,050 mm Travel Y-axis: 550 mm Travel Z-axis: 500 mm Milling spindle (BT40): 12,000 rpm MACHINE DETAILS Control unit: Siemens 828D Operating hours: Power-on hours: 26,247 h Spindle hours: approx. 400 h (total 4,727 h) EQUIPMENT - Active electrical cabinet air/air cooler - Network connection - USB interface - Spindle chiller - Side windows left and right for large components - Safety cabin with armoured glass - Coolant pump at spindle Nkodpfxeyf E Sze Agnou - Pump for chip flush device - Air at the spindle via M-code function - Operating status light - Oil separator - Electronic handwheel - ICS system (internal coolant supply) - Pump for ICS - 24-position tool changer - Hinge-type chip conveyor, rear discharge - Glass scales including purge air by Siemens - Wireless workpiece measuring system Renishaw OMP60 - Tool measuring system Renishaw NC4 - Automatic machine door Note: The Halter automation system as well as vices including zero-point clamping system are not included in the scope of delivery.

Condition: good (used), Year of construction: 2016, In good technical condition and fully functional. Built in 2016. Nkedpfxjx Tti Se Agneu Machine includes 4-axis TSUDAKOMA, workpiece probe, and tool probe. Drives Axis drives (X/Y/Z) 1,000 / 550 / 500 mm Distance table surface - spindle surface 130 - 630 mm Axis guide - linear rolling LM Table work surface 1,100 x 502 mm Load capacity 700 kg Table surface configuration mm 5x T-slot (width 18, pitch 80) Maximum spindle speed 12,000 rpm Spindle power (10 min./continuous) kW 18.5 / 11 Rapid feeds (X/Y/Z) m/min 36 / 36 / 30 Working feed (X/Y/Z) mm/min 1 - 24,000 Sliding motor (X/Z) kW 1.8 / 1.8 / 3.0 Automatic tool change Tool taper - BT40 Clamping bolt - MAS P40T-1 (45°) Number of tool positions: 24 Max. tool diameter mm Ø 80 / Ø 150 (without secondary tool) Max. tool length / weight mm / kg 300 / 8 Tool-to-tool change time: Section 2.5 Chip-to-chip change time: Section 4.3 Magazine and change disk design with rotating arm Power consumption: 30 kVA Tank capacity for spindle lubrication/cooling: l 6 / 20 For cooling emulsions: l 380 Machine dimensions: Height mm 2,670 Floor area (length x width) mm 3,335 x 2,200 Weight: 6,500 kg Control system: Fanuc 0i-MD Air blowing of the spindle Machine adjustment elements Machine protective cover Screw conveyor in the work area Cooling system Safety door Ethernet interface

Condition: used, Year of construction: 2008, operating hours: 5,900 h, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, Wire Diameter 0,1-0,3 mm Nksdowzyr Aopfx Agnju Automatik Threading Working Hours 5900 Std Verfahrwege X 350 mm Y 220 mm Z 220 mm U 350 mm V 220 mm Year 2008

Condition: good (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, Technical Data VESTA-1000/12K Travels Axis travels (X/Y/Z) mm: 1,000 / 550 / 500 Distance table surface – spindle nose mm: 130 – 630 Axis guideways: Linear rolling LM guides Table Working surface mm: 1,100 x 502 Maximum load kg: 700 Table configuration mm: 5x T-slots (width 18 mm, pitch 80 mm) Spindle Maximum speed rpm: 12,000 Spindle power (10 min / continuous) kW: 18.5 / 11 Feeds Rapid traverse (X/Y/Z) m/min: 36 / 36 / 30 Working feed (X/Y/Z) mm/min: 1 – 24,000 Feed motor (X/Y/Z) kW: 1.8 / 1.8 / 3.0 Automatic Tool Changer Tool taper: BT40 Pull stud: MAS P40T-1 (45°) Number of tool stations pcs: 24 Max. tool diameter mm: Ø 80 / Ø 150 (without adjacent tool) Max. tool length / weight mm / kg: 300 / 8 Tool-to-tool change time sec: 2.5 Chip-to-chip change time sec: 4.3 Magazine & changer type: Disc magazine with rotary arm Power Supply Nkodpfex Rzhdsx Agnou Connected load kVA: 30 Tank Capacities For spindle lubrication/cooling l: 6 / 20 For coolant l: 380 Machine Dimensions Height mm: 2,670 Floor space (L x W) mm: 3,335 x 2,200 Weight kg: 6,500 Control System Fanuc 0i-MD Standard Equipment - Spindle air purge - Machine alignment elements - Machine protective guarding - Auger conveyor in working area - Cooling system - Safety doors - Ethernet interface - CNC system software options by HWACHEON: - OPTIMA (feedrate optimization) - HAI (40-block memory, AI nano contour control) - HTLD (tool load monitoring) - HTDC (thermal displacement compensation for spindle and machine frame [HTDC=HSDC+HFDC]) - HECC (accuracy or speed preference in machining) - Centralized lubrication system - Lubricant oil evacuation to dedicated tank - Electronic handwheel - Operating documentation in Czech - Pneumatic system - Program capacity: 1,280m (512kb) - Rigid tapping - 3-color status signal light - Spindle jacket cooling - Air dryer (included) - Work area lighting - 10.4" color LCD display - CE certificate - Transformer - Through-spindle coolant 30 bar - Manual Guide i - Chip conveyor - Workpiece and tool probes - 4th axis direct control by Fanuc CNC system via M-codes (or independent controller usable for another machine)

Condition: excellent (used), Year of construction: 2013, x-travel 1000 mm y-travel 550 mm z-travel 500 mm CNC-control Fanuc Oi-MD table-size 1.100 x 500 mm max. table load 700 kg spindle taper ISO BT-40 spindle turning speed range 10.000 U/min feed stepless 24.000 mm/min rapid traverse 36/36/30 m/min drive capacity - spindle motor 15/11 kW tool change unit 24 coolant IKZ 20 bar voltage 400 V total power requirement 30 kVA weight of the machine ca. 6,5 t dimensions of the machine ca. 3,35 x 2,20 x 2,67 m chip conveyor 2,40 x 1,50 x 1,40 m filter unit 0,90 x 1,40 x 1,30 m Transformer 0,60 x 0,55 x 0,55 m - Serial No..:M281361B5N D - Machine ON: 21,011 h - NC-Indexing Device Manufacturer KITAGAWA, (Call by M-Command) - control: FANUC Oi-MD - Internal coolant supply through spindle 20 bar Nkodpfx Agexvdtwenou - Chip conveyor

Year of construction: 2018, condition: ready for operation (used), - USED - 5-AXIS BRIDGE-TYPE CNC MILLING MACHINE Nksdpswla Hnjfx Agneu LONGITUDINAL TRAVEL: 2500 mm TRANSVERSAL TRAVEL: 3500 mm VERTICAL TRAVEL: 1300 mm RAPID FEEDS L-T-V: 40 m/min TABLE SIZE: 3500 x 2500 mm HEAD: A/B AXIS AUTOMATIC ; A-axis ±185° - B-axis ±270° ; HSK A100 ; 12000 rpm TOOL MAGAZINE: CHAIN-TYPE ; 64 POS CONTROL UNIT: HEIDENHAIN TNC640 WEIGHT: 51370 Kg ACCESSORIES: HIGH PRESSURE COOLANT ; SWARF CONVEYOR ; LASER TOOL SETTER ; PAPER FILTER ; TOUCH PROBE ; PORTABLE HANDWHEEL

Condition: excellent (used), Year of construction: 2005, Working travels 1000x550x550mm Spindle taper BT40 Spindle speeds -10'000 rpm Tool changer 24 Pos. FANUC 0i-MD control Cooling through spindle Nksdpfxsud Nbhe Agnsu Misc.accessories MARCELS MASCHINEN CH