Tool milling machine

HURON NU-4

Condition: excellent (used), Year of construction: 1976, x-travel 1100 mm y-travel 700 mm z-travel 500 mm turning speeds 30 - 2066 U/min weight of the machine ca. 3,2 t Itjdpfoy Ivduox Aifog dimensions of the machine ca. 2,3 x 2,0 x 1,8 m

Condition: good (used), Riello oil burner 482M1,power 2370Kw,220kg/h Ijdpfspir Ryox Aifstg

Condition: good (used), 3-axis visualization at 5µ resolution, fitted with protective enclosure Table surface: 1435 x 460 mm Travels: 1100 x 700 x 500 mm (LxWxH) Number of T-slots: 5 Spindle SA40 from 30 to 2066 rpm Spindle motor with brake for safety 2 emergency stop buttons Full spindle guarding Automatic lubrication 3 automatic movements and 3 rapid movements Rapid traverse speed: 2800 mm/min Power: 10 hp, 380 volts Lighting, coolant system with separate settling tank Front control panel with emergency stop button Machine in perfect condition Itedoxxz Anopfx Aifsg Machine weight: 3500 kg

Condition: used, Year of construction: 1967, x-travel:1100 mm y-travel:700 mm z-travel:500 mm distance spindle /table:9-509 mm spindle head - swivable:360° spindle taper::SK 40 spindle turning speed range:30 - 2066 U/min turning speeds steps:27 feed speeds:1,6 - 820 mm/min feed steps:27 surface area:1435 x 460 mm rapid traverse X- and Y-axis:2,8 m/min Itodecxxyzjpfx Aifeg rapid traverse Z-axis:1,4 m/min total power requirement:10 PS(HP) weight of the machine ca.:3,1 t dimensions of the machine ca.:2,36 x 1,65 x 1,45 m (b x h x t)

Condition: excellent (used), Year of construction: 2000, Nominal diameter: 4,500 mm Swing diameter over bed: 820 mm Swing diameter over steady rest carriage: 650 mm Spindle bore: 115 mm Main spindle drive power: 40 kW Milling spindle drive power: 25 kW Milling spindle tool holder: HSK 100 Tool changer: 3 x 30 positions Control: SINUMERIK 840 C Iodpfx Aoyk R Dyeifotg Including chip conveyor Including documentation Machine is under power and will be available in approximately 2 weeks!

Condition: used, Universal Milling Machine HURON NU4 Travel X: 1100 mm Travel Y: 700 mm Travel Z: 500 mm Spindle SA50 (supplied with on reducer SA50/SA40) Spindle speed: from 30 to 2066 RPM Table size: 1435 x 460 mm Universal Head Spindle motor: 9 kW Scale 3 axes NEWALL Lubricant pump Voltage: 380 V Iedpfx Aoxxa Dqeifjtg Width with ends table: 2500 mm / without ends table: 1500 mm Depth: 2300 mm Total height: 1800 mm Weight: 3,1 T

Condition: used, Year of construction: 1987, pressure / t stroke / mm table-size / mm weight of the machine ca. 65000 kg Make: Shepherd Type: SVRM 4-roller bending machine: Year of construction: 1986 Iodpeuddcajfx Aifjtg Working width: 3000cm Smallest pipe diameter with 600 mm roller: Ø 720 mm Smallest tube diameter with 360 mm roller: Ø 460 mm Sheet thickness up to (depending on the material): 50 mm Material SA- 738 B Working width: 2500 mm Material SA- 738 B Material thickness: 35 mm conical bending: Except for the top roller, all rollers can be moved in an inclined position for conical bending. The roller positions can be read on display instruments. For semi-automatic or fully automatic operation of the machine, the bearing jewels of the rollers are equipped with scale bars and slide cams for limit switch actuation. This allows the rollers to return to the same set position over and over again, giving a very high level of uniformity in the shot wefts being bent.

Condition: used, Year of construction: 2006, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 12.000 1/min tool taper: SK 50 control: SIEMENS 840D shopmill tool change unit: 240 fach size of pallet: 630 x 630mm mm spindle: 52 kW / 430Nm total power requirement: 87 kVA weight of the machine ca.: 15 t horizontal machining center, NC-round-table pallet-changer (2 pallets), Internal Coolant Supply 40 bar, prepared for Infrared Touch Probe Renishaw MP 10 without probe, tool-breakage control (mech.), Itsdpfx Aispumdcefog MQL, airblast through spindle, oilmist suction, TRANSMIT funbction, accuracy package, mode 4, glass window right door, incl. FASTEMS FPC 1000 pallet pool for 14 pallets, incl. setting up station, control, and 10 pallets approx. 98.500 h main switch on apprax. 45.500 Spindle hours *

Condition: good (used), Year of construction: 2013, grinding diameter 140-355 mm grinding length 3000 mm centre height 260 mm weight of the machine ca. 8,3 t dimensions of the machine ca. 8500 x 3500 mm SA 6Ux3000 external cylindrical grinding machine Year of manufacture: 1981 Retrofit: 1 x 2013 SERWEMA Maximum grinding diameter with tailstock: 140 mm Maximum grinding diameter without tailstock: 355 mm Maximum grinding length: 3,000 mm Center height 260 mm Workpiece weight max. 500 kg Machine footprint 8500 x 3500 mm Itsdpfx Aisynmpyofsg Machine weight 8500 kg

Condition: used, Year of construction: 1977, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm grinding wheel diameter 400 mm grinding wheel width 50 mm bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° Itjdpfx Aioynmpgjfjg grinding spindle speed 1500,1700,2200 U/min 0,001-0,030 mm/Ø 0-0,95 mm/Ø ±8 ° longitudinal feed of the table 1300 mm table speeds 0,02-6 m/min 130 kg 130 inkl. Spannugkg kg 70 mm total power requirement 6,5 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 4,2 x 2,0 m Neu geliefert an Universität. 2018 übernommen. Dann komplett bei BEMA gewartet und an an Einmannbetrieb geliefert. Nun wird die Maschine nochmal gewartet und Tischgeometrie neu hergestellt. 2-Achsen-Digitalanzeige Fagor nachgerüstet. -Reitstock mit Feinverstellung -Innenschleifeinrichtung -Kühlmittelanlage Zubehör auf Anfrage