Machining center

HURCO VM 1

Condition: good (used), Year of construction: 2004, operating hours: 21,000 h, Hurco 3 axis vertical machining center in good condition with ca 21000 operating hours. Ready for immediate delivery (dismantled and transport ready). Cnc control Hurco Ultimax X-axis 600 mm Y-axis 355 mm Z-axis 455mm Motor 7.4 KVA Frequency 50 Hz Full load 13 KVA AC volts 3 phase 400 Capacity Tool Magazine 16 positions Type of tool holder SK40 Max spindle speed: 8000 rpm Ijdsx Uqm Dopfx Ag Ueht Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: used, Year of construction: 2006, x-travel 600 mm y-travel 400 mm z-travel 400 mm control MSX 501 Mori Seiki table surface area 700 x 450 mm max. table load 350 kg number of T-slots 4 T-slot - width 18 mm T-slot - distance 100 mm Number of revolutions 12.000 U/min power capacity - main spindel 18,5 / 15 / 11 kW tool taper BT 40 max. Torque 110,5 Nm diameter of forward milling spindle bearing 70 rapid travel x/y/z 20.000 mm/min feed speeds 1 - 20.000 mm/min Tipp feed 15 Steps / 0 - 1.260 mm/min Number of Toolpositions in magazine 40 Pos. Max. mould width 80 mm max. tool-dia with free toolbox 125 mm max. tool length 250 mm max. tool weight 8 kg change-time chip to chip 2,8 sec change-time tool to tool 1,0 sec Iedpfx Agev Az Uco Ueht total power requirement 34 kVA weight of the machine ca. 7,2 t dimensions of the machine ca. 2,8 x 3,0 x 2,9 m Machining Center Vertical MORI SEIKI - NV 4000 DCG - ca. 14.000 Operating-Hours

Condition: used, Year of construction: 2006, Offer, subject to change: Ihedpfewl H Rmox Ag Ust 1 used vertical machining center Manufacturer: Hurco, Type VM1, Serial number H-V12319, Year of manufacture: 2000 Control: ULTIMAX 4 Table dimensions: 762 x 356 mm X travel: 660 mm Y travel: 356 mm Z travel: 456 mm Spindle speed range: 10 – 10,000 rpm Tool changer: 20-station SK40 tool holder Rapid traverse rates X/Y/Z: 28 m/min Drive power: 11 kW Space requirement: L x W x H: 2,000 x 1,800 x 2,600 mm Weight: approx. 2,900 kg

Year of construction: 2002, condition: ready for operation (used), Machining center Hurco VM 1 spindle speed max. 8000 rpm traverse path: X: 660mm Y: 406mm Z: 508mm spindle 2000 hours Ijdpfx Agoi E Iacj Ueht complete software options DXF tapping without chuck all tools are included , Hilma Schraustock drawer shcrank with tools

Condition: used, Year of construction: 2000, Technical details: x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm b-axis: manuell positionierbar ° c-axis: manuell positionierbar control: Heidenhain TNC 124 tool changer with: nein Plätze spindle taper MT: SK40 Revolution per minute: 4500 U/min. feed speeds infinitely variable: X/Y/Z: max. 14000 mm/min Ihodpfx Asu Idffjg Uot rapid traverse:: 5,0 m/min table-size: 700 x 500 mm total power requirement: 17 kVA Weight approx.: 2,91 t dimension machine xH: 2,0 x 2,0 x 2,5 m CNC universal vertical milling machine The machine has 5 axes. B- and C-axis manual with measuring system. B-axis table swivel -10° / +95° and C-axis table rotate 360° (not interpolatable, manually selectable via control). Cooling device (without pump) Operation via swiveling boom *

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Hurco machining center VM 1 very good condition Ihodpfxjrxfxhj Ag Ust x-way: 660 mm y-travel: 355 mm z-travel: 455 mm Control system: Ultimax Table clamping surface: 760x355 mm Table load: max. 340 kg Tool magazine with: 16 places Tool holder: SK - A40 Spindle speeds: 10-10000 rpm Spindle hours Total power requirement: 7.8 kW Machine weight approx.: 3.8 t

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: VMX106205017CHB, travel distance X-axis: 660 mm, travel distance Y-axis: 355 mm, travel distance Z-axis: 457 mm, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 20, TECHNICAL DETAILS Control: Ultimax 4 system version 2.37.01e (Patch F) / 2.6.04i Table dimensions: 760 mm x 355 mm Travel X: 660 mm Travel Y: 355 mm Travel Z: 457 mm Spindle Spindle speed: 10 - 10,000 rpm Clamping device holder: SK40 Feed rates Rapid traverse X/Y: 22,500 mm/min Rapid traverse Z: 3,810 mm/min Tool changer Tool changer: 20-way MACHINE DETAILS Floor area (L x W x H): 2,600 mm x 1,600 mm x 2,500 mm Ihsdjxy Nq Aepfx Ag Ust Weight: approx. 3 t

Condition: used, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, Milling machine, second-hand Make: Fadal Model: 904-1 VMC 3016 Year of manufacture: Serial No. 9401487 Technical data: Ihsdpstud Utsfx Ag Uet X-travel 762 mm Y-travel 406 mm Z-travel 508 mm Spindle holder: SK 40 Spindle speed 8000 rpm Machine weight: 3800 kg

Condition: excellent (used), Year of construction: 2007, Vice NOT included Comes with a small selection of tooling. Ihjdpfxsxwlx Do Ag Ujt X Axis Travel - 660mm, Y Axis Travel - 356mm, Z Axis Travel - 457mm, Max Table Load - 340kg, Spindle Motor - 10HP, Spindle Speed - 8000RPM, Spindle Taper - 40CT, Tool Changer - 20ATC

Condition: ready for operation (used), Year of construction: 2006, operating hours: 25,000 h, functionality: fully functional, machine/vehicle number: VMX1-06229016BHB, travel distance X-axis: 660 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 450 mm, table width: 762 mm, table length: 356 mm, TECHNICAL DETAILS Travel Paths Travel X-axis: 660 mm Travel Y-axis: 350 mm Travel Z-axis: 450 mm Table and Mounting Table clamping surface: 762 x 356 mm Mounting: SK 40 DIN 69871 Spindle and Tools Speed: 10 - 10,000 rpm Tool station capacity: 20 stations Ihsdpfx Asw Eiaqjg Uet Control: ULTIMAX 4 MACHINE DETAILS Electrical Data Voltage: 400 V Number of phases: 3 Frequency: 50 Hz Operating hours: 25,000 hours Dimensions & Weight Dimensions: 2,000 x 1,800 x 2,660 mm Weight: 2,900 kg

Condition: good (used), Year of construction: 2006, operating hours: 119,571 h, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45,000 m/min, rapid traverse Y-axis: 45,000 m/min, rapid traverse Z-axis: 45,000 m/min, controller model: Siemens 840 D, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hermle C30 U Siemens 840D Machine ON: 119,571 h, Spindle ON: 56,792 h - Spindle HSK-A63 10,000 rpm - 32 tool stations - Rotary table SRT 280 mm with integrated clamping system HSK100 (if not needed, it can be covered or alternatively converted to a zero-point clamping system) - External coolant supply - Internal coolant supply with 80 bar paper band filter - Chip flushing gun - Chip conveyor - Handheld control module - Automatic cabin door - 32 tool stations plus 87 additional stations ZM87 - Thermal compensation Iedpfx Agjxcp Sro Ujht - BLUM tool measurement on the side - Renishaw probe - Chip container - Status light The machine has been thoroughly inspected and comes with a geometry report as well as circularity test measurements. The machine can be viewed and tested under power at any time. Very well-maintained condition.