Ultrasonic cleaning system

HOSEL SOLVACS 2

Condition: refurbished (used), Year of construction: 2004, operating hours: 22,000 h, functionality: fully functional, machine/vehicle number: 014404, total width: 2,600 mm, total length: 1,750 mm, total height: 2,350 mm, maximum load weight: 50 kg, tank capacity: 230 l, compressed air connection: 6.5 bar, input voltage: 380 V, year of last overhaul: 2026, Hösel Solvacs-2 with additional distillation unit. The system and the distillation unit have both undergone a professional general overhaul. Ncodpfszln Iqex Agqow The system is connected to the power supply and is ready for inspection and a test run. The system requires external cooling.

Year of construction: 1998, condition: like new (used), 65 Watt YAG laser Ncodpfx Asd Dhw Nogqjw

Condition: used, Year of construction: 2007, functionality: fully functional, total height: 5,980 mm, total width: 3,380 mm, total length: 3,074 mm, load capacity per storage section: 460 kg, input voltage: 400 V, Automated warehouse optimization storage system KARDEX Shuttle XP500 System Type: SHUTTLE-XP-500-3050x864 Control: C2000, with B/W OP2000 display Serial No.: Year of construction: 2007 Total Load: 2 x 33,500 kg Load per tray: 460 kg (evenly distributed) Tray dimension: 3050 x 864 mm Number of trays: 32 pieces (more on request) Dimensions Shuttle W x D x H: 3380 x 3074 x 5980 mm (height Kardex is adjustable to available height) Dimensions Shuttle D with full tray extraction table: 4198 mm Power: 3/N/PE400 V, 17 A, 50/60 HZ, 8.6 kVA This offer is valid subject to the system being unsold. Technical details per Shuttle: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 33,500 kg - Maximum tray capacity: 32 trays Medium X Type 2, 460 kg each, evenly distributed; more trays can be ordered. - Tray dimensions: 3050 x 864 mm - Machine dimensions: Width x Depth x Height: 3380 x 3074 (4198) x 5980 mm - Footprint of the system approx.: 14.19 m2 - Capacity with 32 trays: approx. 84 m2, each tray is approx. 2.64 m2 - Electronic volume measuring system in 25 mm grid - An access opening with sliding doors to protect people and stored goods Njdpfx Aownanksgqocw - Control C2000 with graphic display OP-C2000 B/W - LED anti-glare lighting above access point - Use of toothed belt for minimum noise - Use of toothed belt for fastest order picking - Distances can be realized in steps of 25 mm by arranging the support profile, a prerequisite for high compression storage - Automatic full tray extraction table Price: On request, via email only Price: excl. VAT, including transport and installation Delivery time: in stock Machinehandel De Leeuw BV specializes in used machines and accessories for the metalworking industry and used paternoster systems from, among others, Kardex, Hanel / Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automatic storage systems such as the Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7 – b 5111 PA Baarle-Nassau The Netherlands

Condition: excellent (used), Year of construction: 2022, operating hours: 2,963 h, functionality: fully functional, TECHNICAL DATA - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 42 mm - Travel: 100 mm - Spindle speed: 6,000 rpm - Spindle drive power: 7.5/5.5 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 34 mm - Spindle speed: 5,000 rpm - Spindle drive power: 5.5/3.7 kW - Minimum C-axis resolution: 0.001° - Number of turret heads: 2 UPPER TURRET HEAD - Number of positions: 8 - Travel X: 140 mm Njdpow Igyrefx Agqjcw - Travel Z: 235 mm - Travel Y: 70 mm (+/-35 mm) - Driven tool speed: 5,000 rpm - Driven tool power: 1.0 kW LOWER TURRET HEAD - Number of positions: 6 - Travel X/Z: 140 / 310 mm ELECTRICAL SUPPLY - Total connected load: 30 kVA WEIGHT AND DIMENSIONS - Required floor space: 2,220 x 1,460 mm - Machine height: 1,700 mm - Machine weight: 3,100 kg

Condition: good (used), Year of construction: 2005, functionality: fully functional, Used 2-meter CNC press brake from Trumpf Ncodpfex I N Awex Agqew Model: V85 Capacity: 2050 x 85 tons Delem CNC control CNC-controlled Y1, Y2, X, and R axes Wila hydraulic upper clamping Year of manufacture: 2005 Without tools

Condition: ready for operation (used), Year of construction: 2010, operating hours: 15,043 h, laser power: 3,600 W, travel distance X-axis: 6,500 mm, number of axes: 5, This TRUMPF TruLaser Tube 7000 KT02 was manufactured in 2010. It features a working area of 6500 mm on the X-axis and can handle circular diameters up to 200 mm. Equipped with a CO₂ laser TruFlow 2000 and a laser cutting head with a 155 mm lens, it's ideal for precise tube cutting. Contact us for more information about this machine. • Circular diameter: 200 mm • Reject station: 3 m with brush table • Reject tray • Working Range X Tube Axis: 6500 mm • Outer Circle Diameter: 254 mm (Upgraded from standard 200 mm) • Unloading Station: 3 m with brush table, front unloading • Laser Type: CO2 Laser TruFlow 3600 including LensLine (Surcharge upgrade from standard TruFlow 2000) • Control: Sinumerik 840D, Teleservice • Standard Software/Features: NitroLine, FocusLine, SprintLine, Laser power control, Programmable cutting gas pressure, Program re-entry, Automatic shutdown, Workspace lighting, Laser logbook function, Laser cooling unit • Laser: CO₂ laser TruFlow 2000 • Laser cooling unit • Cutting Head: Lens cutting head with 155 mm focal length, ControlLine • Control unit: 84D • Connectivity/data transfer: RJ-45 network connection, USB connection; network connection incl. installation • Safety: CE marking, Multi-beam light barriers, Compact dust extractor 1500 Nm³/h, Protective cabin with Makrolon panels • Ambient Operating Temperature: Up to 43°C • Installation Type: Special machine installation setup Additional equipment • Accessories: • Spare parts case for cutting heads • 1 x remote control kit • Clamping jaw set Ø 16 / 200 mm • U-shaped guide rails for reject station with ID = 200 mm • Automation: • Loading Unit: LoadMaster Tube 6.5 m with bundle support, 2 grippers, 254 mm outer circle diameter capacity, low-scratch design for 6m, swiveling conveyor line, additional gripper D=254 mm • Options for LoadMaster Tube 6 m: • Circular diameter 250 mm • Shorter belt support • Swivelable conveyor section Ncedpfx Agsx D I H Doqew • Additional gripper Ø 200 mm • Additional gripper Ø 250 mm • Special equipment: • Flexible reject station 4.5 m (prototype) instead of reject station 3 m, without brush table • Special installation for flexible reject station • LoadMaster (series version 103) • Installation 100 mm higher (use of wire mesh container possible), decision upon acceptance • Services: • Installation, commissioning, training

Condition: ready for operation (used), Year of construction: 2015, operating hours: 61,469 h, controller manufacturer: TRUMPF, controller model: TASC 6000, This TRUBEND Cell 5000 with TruBend 5085 extended version (2720 mm x 850 kN) and BendMaster 60 was manufactured in 2015. World's first bending automation with image recognition for maximum flexibility. Sheet metal parts up to 40 kg, 6-axis backgauge sensor technology. Maximum repeat accuracy thanks to angle sensor technology (ACB) in automated operation. It features a stable all-steel frame, electro-hydraulic top drive, and a modern block hydraulic system. The control unit is a TRUMPF TASC 6000 with a 15-inch touchscreen and network capabilities. Ideal for precise bending operations, consider the opportunity to buy this TRUMPF TruBend Cell 5000 press brake. Contact us for more information about this machine. • Machine: TruBend 5085 (2720 mm x 850 kN) with BendMaster 60 • Stable all-steel machine frame • Press beam with spherical bearing and tilt adjustment • Electro-hydraulic top drive with 4-cylinder technology • Generous edge clearance • Flat front covers • Modern block hydraulics • Electronic pressure balance • Measuring system with glass scale and spring compensation • Hydraulic oil in the machine (lifetime lubrication) • Oil cooler • Control cabinet cooling via air-to-air heat exchanger • Modern machine design • Stop/Backgauge • Stop system • Backgauge system: 2 axes (X and R) • Tool clamping • Upper tool holder, manual clamping, hardened • Lower tool holder, hydraulic clamping, hardened • Lower tool shift, 2 positions, pneumatic • Crowning • Manual crowning Ncedex Imqlspfx Agqjw • Control • TRUMPF TASC 6000 • Graphical workshop programming • Windows XPe (embedded), Pentium 4, 2.8 GHz • 2 GB RAM • 15-inch touchscreen • Network-enabled • Teleservice via modem • Operation • Control panel with LCD keypad and foot switch • Communication rail • Safety • Standard safety devices • BendGuard safety device for upper tools up to 390 mm • CE marking Additional equipment • TRUMPF BendMaster automation (standard features) • Robot/Handling • Stable base and manipulator in die-cast aluminum • Load capacity 60 kg (workpiece plus gripper) • Low-profile welded floor track • Sheet metal sensor for contour detection • Rotary feedthrough for easy gripper change • Gripper coupling on the BendMaster • Sensors for 4-axis backgauge system • Electric drives • Double sheet detection • NC gripper transfer station • Vacuum generation for suction grippers • Control • TRUMPF PC control with operator terminal • Teleservice via modem • Operation via screen, mouse, and keyboard • Safety • Safety fence with access doorWorld's first bending automation with image recognition for maximum flexibility Sheet metal parts up to 40 kg, 6-axis backgauge sensor technologyMaximum repeat accuracy thanks to angle sensor technology (ACB) in automated operationTruBend 5085 (2720 mm x 850 kN) with BendMaster 60

Year of construction: 2004, condition: good (used), Newsmith Crate / Tray Washer Up to 800 crates / hour All stainless steel Wash pump with detergent or soap agent facility Rinse pump with rinse agent facility Adjustable wash temperature controls Drive conveyor with 3 speed control selector All safety controls and e-stops Nodpfjma E Hcjx Agqocw Gas burner (can be changed to oil) Complete with extractor fan Ready for use

Condition: ready for operation (used), Year of construction: 1994, Studer S30-1 Njdpfx Aoy Rmxusgqjcw Year of manufacture: 1994

Condition: used, TECHNICAL DETAILS - center height : 100 [mm] - Distance between centers : 650 [mm] - Max. table orientation : [°] - Travel : 650 [mm] - Speed : 100 - 3500 [mm/min] GRINDING WHEEL HOLDER HEADSTOCK - Orientation : [°] - T1 grinding wheel dimensions : 350 x 32 x 127 [mm] - Power : 3 [kW] - Speed : 1600 - 2200 [rpm] - Peripheral speed : [m/s] PART-HOLDER HEADSTOCK - Spindle speeds : - 1200 [rpm] - Power : 0.5 [kW] - Type of cone : CM4 - Max. part weight : 20 [kg] - Orientation : 0 - 90 [°] POWER SUPPLY - Supply voltage : 400 [V] - Power : 8 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 00 x 00 [mm] - Machine height : 1650 [mm] - Machine weight : 1900 [kg] MACHINE HOURS - Number of hours under power : 01 [h] Nodpfxoyn R I Hs Agqjcw EQUIPMENT - Sony LG20-2 display - Automatic contact detection : SENSITRON 6 - 1 tailstock with fine adjustment - 1 internal grinding spindle - Fixed dressing device - Coolant tank - 1 three-key steady rest