Mobile suction device

Holzkraft ASA 4303

Condition: used, Year of construction: 2021, Year of manufacture 2021 Dimensions and weights Hodpfx Abjwb Ekdsajp Length (product) approx. 1700 mm Width/depth (product) approx. 600 mm Height (product) approx. 2400 mm Weight (net) approx. 69 kg Chip collection volume 2 x 215 l Nominal diameter of suction nozzle inlet: 260 mm Nominal diameter of suction nozzle outlet: 2 x 100, 2 x 120 mm Electrical data Idle speed 2950 rpm Supply voltage 400 V Mains frequency 50 Hz Power input 3.8 kW Power output 3 kW Filter Filter area 2 x 2.4 m² Noise emission Sound pressure level max. 89.9 dB(A) Voltage flow Nominal flow rate 4300 m³/h Vacuum pressure max. 2000 Pa SCOPE OF DELIVERY Fine filter bag Two bags of shavings Availability: Short-term Storage location: Flörsheim

Condition: used, Year of construction: 1987, Used machine Year of manufacture: 1987 Condition: fully overhauled Features and technical data: - Table size: 1100 x 760 mm - Motor: 4.7/5.7 kW, pole-switchable - With forward/reverse operation - Milling spindle: MK 5 / 30 mm - Height and tilt adjustment via handwheel - Spindle speeds: 3000/4500/6000/9000 rpm - Spindle tilt range: -5 to +45° - Milling fence with metal jaws - Mounted on round insert plate, therefore rotatable 360° - With table extension on both sides with retractable frame supports - Equipped with 4-roller power feed unit Weight: approx. 900 kg Images show the machine in unrefurbished condition Availability: approx. 4 weeks after order placement Hedpfx Abew I U U Djajp Location: Flörsheim

Condition: new, Year of construction: 2021, Exhibition unit Year of manufacture: 2021 Dimensions and Weights Length (product): approx. 1700 mm Width/Depth (product): approx. 600 mm Height (product): approx. 2400 mm Weight (net): approx. 69 kg Chip collection volume: 2 x 215 l Nominal outside diameter extraction nozzle (inlet): 260 mm Nominal outside diameter extraction nozzle (outlet): 2 x 100, 2 x 120 mm Electrical Data No-load speed: 2950 rpm Connection voltage: 400 V Mains frequency: 50 Hz Power consumption: 3.8 kW Hedpfx Aew I Uuwjbasp Output power: 3 kW Filter Filter area: 2 x 2.4 m² Noise Emission Max. sound pressure level: 89.9 dB(A) Airflow Nominal volumetric flow: 4300 m³/h Max. negative pressure: 2000 Pa SCOPE OF DELIVERY Fine filter bag, two chip collection bags Availability: short-term Storage location: Hochheim

Condition: new, Year of construction: 2025, Chip extraction unit ASA 4303 mobile, with extraction unit that can be rotated by 180° For milling, planing, and sawing chips (not suitable for dust) Extraction unit can be rotated by 180°, enabling extraction from below or above Robust metal fan impeller Equipped as standard with high-quality chassis for improved stability and easy maneuvering Quick-release fasteners for filter and chip collection bag Fine filter bag, double-woven Dimensions and weights Chip collection volume 2 x 215 l External diameter of extraction nozzle, inlet 260 mm External diameter of extraction nozzle, outlet 2 x 100, 2 x 120 mm Length approx. 1700 mm Width/Depth approx. 600 mm Height approx. 2400 mm Weight approx. 69 kg Electrical data Idle speed 2950 min¯¹ Power consumption 3.8 kW Connection voltage 400 V Mains frequency 50 Hz Filter Filter area 2 x 2.4 m² Hodpfohk S Slsx Abasp Noise emission Sound pressure level max. 89.9 dB(A) Volume flow Nominal volume flow 4300 m³/h Maximum negative pressure 2000 Pa Scope of supply: Two filter bags, two chip collection bags Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: ready for operation (used), Year of construction: 1991, Volume flow: 1550 m³/h Pressure difference: 1000 Pa Drive motor: 400 V, 2850 rpm, 1.5 kW Intake nozzle diameter: 150 mm Space required: 1100 x 500 x 2450 mm Hsdsvitd Aspfx Abajp Weight: 133 kg

Condition: new, Year of construction: 2025, 4-knife cutterhead for optimal planing results Smooth operation thanks to precision drive unit and heavy cast iron construction Front steel infeed roller with helical teeth for optimal feed rate Satin-finished steel outfeed roller, optionally with rubber roller on the outfeed side The worktable is mounted on four large columns, ensuring maximum stability under all operating conditions. Thickness table adjustment is carried out via a handwheel with a numerical display for the set planing height (accurate to 1/10 mm) Standard equipment includes two feed speeds, conveniently selectable from the operator's front Powerful industrial motor Stable steel/cast iron construction Equipment details: Worktable Mounted on four large spindles, ensuring maximum stability under all operating conditions A special lifting device ensures that the table position is maintained perfectly, even without locking TERSA planing cutterhead No more adjustment and screwing required Planer knife changes in seconds Self-locking Motorized thickness table height adjustment in S 52 elite s Motorized height adjustment of the thickness table with electronic decimal display For greater precision and user-friendliness Dimensions and weights Length approx. 1080 mm Width/Depth approx. 1440 mm Weight approx. 455 kg Dust extraction connection Dust extraction nozzle diameter (thicknessing) 120 mm Drive power Hodpfx Abod Hx Hpsaep Main motor 7 kW Installation information Space required (length) 1440 mm Space required (width/depth) 1071 mm Space required (height) 1088 mm Explanation of space required: The dimensions take into account maximum travel distances or usable lengths. Machine body length 1030 mm Machine body width/depth 998 mm Length 1000 mm Width 1800 mm Explanation of work area: Please add the specified dimensions to the space required to obtain the recommended free installation area for the machine. Thicknessing Thickness table length 520 mm Thickness table width 850 mm Working height min. 3 mm Working height max. 240 mm Working length min. 220 mm Maximum chip removal 5 mm Electrical data Connection voltage 400 V Planer cutterhead Type TERSA Diameter 120 mm Number of planer knives 4 pcs Speed 5000 min¯¹ Planer width max. 520 mm Feed Speed 5/8/12/18 m/min

Condition: new, Year of construction: 2025, 4-knife cutterhead for optimal planing results Smooth operation thanks to the precision unit and the heavy cast-iron construction Front steel infeed roller with helical gearing for optimal feed rate Satin-finished steel outfeed roller, optionally with a rubber roller in the outfeed The work table is mounted on four large columns, ensuring maximum stability under all working conditions. The thickness table adjustment is done via a handwheel with a numerical display for the set planing height (accurate to 1/10 mm) Standard with two feed speeds, comfortably selectable from the operator's side Powerful industrial motor Stable steel and cast iron construction Equipment details: Work table Mounted on four large spindles, which ensure maximum stability under all working conditions A special lifting device ensures that the table position is maintained perfectly, even without locking TERSA planing cutterhead No more adjustment and screwing Planer knife change in seconds Self-locking Particularly quiet Thickness table adjustment on S 41 elite s via a handwheel with a numerical display for the set planing height (accurate to 1/10 mm) Dimensions and weights Length approx. 900 mm Width/Depth approx. 1070 mm Weight approx. 361 kg Dust extraction connection Dust extraction nozzle diameter for thicknessing 120 mm Hedjd Hx Hnepfx Abasp Drive power Main motor 5 kW Installation information Space requirement Length 1070 mm Space requirement Width/Depth 900 mm Space requirement Height 1100 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Machine body Length 1040 mm Machine body Width/Depth 900 mm Length 3000 mm Width 1600 mm Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Thicknessing Thickness table Length 423 mm Thickness table Width 775 mm Working height min. 3 mm Working height max. 240 mm Working length min. 180 mm Maximum chip removal 5 mm Electrical data Connection voltage 400 V Planer cutterhead Type TERSA Diameter 95 mm Number of planer knives 4 pcs Speed 5000 min¯¹ Planer width max. 410 mm Feed Speed 6/12 m/min

Condition: new, Year of construction: 2025, functionality: fully functional, Cutting range: 5300 x 2240/2100 x 80 mm Cutting depth: 80 mm Motor power: 5.5 kW Continuously adjustable scoring unit EPS.X – Electronic positioning system for the X-stop 12" touchscreen display Saw Frame • Manufacture of precision components to 1/100 mm accuracy • Solid, self-supporting, permanently welded, torsion-resistant saw frame • TRK1 full-surface support wall made of birch plywood with integrated small parts support • Auxiliary stop profile with its own measuring tape and 3 auxiliary stops for repeat cuts • Automatic detection of central support • Automatic roller locking during cutting Saw Beam • Stable, durable steel construction of the saw beam • Automatic saw beam locking with interface detection Saw Unit • Play-free, easy-running guides • Robust bearing of the motor carriage ensures high cutting precision • Powerful, high-torque 5.5 kW motor (7.5 HP) • Increased operator comfort thanks to largely automated operation • Laser-assisted display for horizontal cuts • Automatic motor carriage clamping • Automatic plunging and swiveling of the saw motor • Pneumatic clutch for easy switch-over to manual operation • SUPERSILENT sound insulation to reduce saw blade noise • Electromagnetic motor brake • ProLock Easy-Fix tool clamping system Control • 12" touchscreen control panel with optimized user guidance Hsdeyx H Dtspfx Abajp • Multilingual user interface • Tool database for maximum flexibility and repeat accuracy • Fully automatic cutting process • Infinitely variable feed speed from 10–25 m/min • Selectable sawing cycle • Panel end detection • Constant return speed • Operating hours counter • Network connectivity • UPS 24VDC for touch PC (uninterruptible power supply) • Automatic saw beam positioning (ASP) Dimension Setting • Digital measuring system DMS.x (horizontal axis for vertical cuts) • Electronic positioning system EPS.y incl. ABO (vertical axis for horizontal cuts) Design, Ergonomics • Typical STRIEBIG product design • Multiple award-winner (including the Design Prize Switzerland) • Ergonomically optimized for function and user Installation • Wall-mounted or free-standing installation possible

Condition: used, Year of construction: 1994, Used, good condition, top equipment, low operating hours. Equipped with 2 rubber outfeed rollers, segmented infeed roller, electric adjustment. Machine cleaned and lubricated. Planer knives replaced. Test planing completed. Machine is complete with all settings. Manufacturer: Hofmann Model: DH 510-2 Year of manufacture: 1994 Machine no.: 51/2-490-3452 GS wood dust tested Motor: 4 kW Hodpeythclofx Abasp Planing width: approx. 510 mm Planing height: approx. 260 mm Segmented pressure bar Segmented infeed roller 2 rubber outfeed rollers Feed rate: 7/14 m/min Number of knives: 2 Knife system: strip planer knives Brück reversible knives Digital height display for planing height Electric height adjustment with handwheel fine adjustment Extraction connection: D 160 mm Space requirement approx. 1000 x 1000 x 1500 mm Weight: approx. 800 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in current condition as inspected, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2003, A fine Altendorf F45 CE is available for sale. The machine will be available from June/July. About the machine: Year of manufacture: 2003 Max. saw blade diameter: 450mm Sliding table: 300cm Scorer Hjdpfx Asy A Riuobajp Electric adjustment of the saw blade Currently, the scorer unfortunately no longer lifts at startup.