Dust collector, Suction equipment

Holzing RLA 200 Viber Power 6500 m3h

Year of construction: 2010, condition: used, Panel return system for use with a single edgebander The panel is transported towards the operator via a motorized belt and a roller\belt table. Lhsdpfx Aaerq Dmro Esr Moeller mini control Maximum panel dimensions 2500 x 1450 mm Maximum panel height 60 mm Working speed 8 - 25 m\min Working height from the ground 835 - 960 mm

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Lhsdpfxjvvkfdo Aa Eer

Condition: ready for operation (used), Technical characteristics En cours de vérification Double roller carriage length: 3000 mm 5.5 kW motor 4 rotation speeds : 3000, 4000, 5000 and 6000 RPM Scoring unit 0.75 kW Parallel fence with fine adjustments 1200 mm Tilting blade ⌀ 350 mm (max 450 mm) Automatic centralized lubrication for blade pivoting Cutting height : 100 mm (max 150 mm with 450 mm blade) Lhedpfxeuciqao Aa Esr Cutting height at 45° : 70 mm (max 106 mm with 450 mm blade) Power and Motors Voltage: 400 V Pluging: Three-phased Power: 7 Kw Motor: 7,5 CV Overall dimensions

Condition: new, Year of construction: 2024, Description High quality galvanized steel housing Powerful, economical engines Standard optional intake connection at top or bottom Uniform filter bags for all variants Discharge in chip tons The modular models of the AL-KO AAS series are available in optimally matched performance categories with energy-saving and quiet motors that drive the fan on the raw air side and thus generate particularly effective overpressure filtering. Durable quality components and an all-metal housing made of galvanized sheet steel give you investment security as well as the many retrofit options. The particularly favourable price and short installation times also contribute to the fact that the AL-KO AAS is definitely the right choice. Ledpfx Aofc A Urja Eshr Technical data AL-KO AAS 3013 Suction port 200 mm Nominal capacity 2.500m³/h Maximum volume flow 3.300m³/h Maximum negative pressure 2,700 Pa Filter area 3 x 2.2 m² Chip collection volume 3 x 175 litres Engine power 3.0 kW / 400 V Dimensions (LxWxH). 2486 x 578 x 2115 mm Weight: 139 kg

Condition: used, machine/vehicle number: 007346, Max working length: 3500 mm Max working width: 1300 mm Heating System: electric Pressure Exerted: 2.35 Kg/cm2 No of Pressing cylinders: 8 Lodev Akwgopfx Aa Eehr

Condition: new, Year of construction: 2023, 2 tables are connected with tandem circuit for a common load of 5000Kg. Technical description with the following main data: Load capacity 3000 kg static line load Ljdpfx Ajk E Hmtoa Eshr useful stroke 800 mm overall height 240 mm total height 1040 mm platform length 1300 mm platform width 1000 mm Material smooth sheet metal Lifting time approx. 18 sec. for the full useful stroke Lowering time load dependent E-connection 3 x 400 V/ 50 Hz + protective grounding, w. 16 A CEE-plug and 3 meter cable motor 2,2 kW, 1.400 rpm. valve voltage 24 V DC Sealing degree IP 54 general, solenoid valve and switch IP 65 Painting steel blue RAL 5011 Aggregate placement integrated in lifting table Control box dead man control incl. 2 m cable Total weight approx. 330 kg Tandem control for joint traversing. Attention: No guarantee can be given for 100% synchronous travel. Any differences in height are compensated for in the home position or top position! The safety shut-off strips of the two lifting tables are NOT mutually coupled. Minimum distance 500mm between the lifting tables. Maximum distance 3000mm between the lifting tables. Self-supporting floor frame with 4 flanged wheels in which the lift table is installed. 4 ball bearing flanged wheels wheelØ150/175, heavy duty version for highest load, made of turned steel C45. Overall height + approx. 50mm

Year of construction: 2024, condition: new, ZIGZAG air separators Application description: ZIGZAG type air separator is a device designed to purify materials in the waste recycling process. The separator separates light fractions from heavy fractions by pneumatic method. It works well with a wide range of waste materials of 0-150mm size. Air separators of this type are used for pre-ground, jagged or very fine materials. Thanks to our unique design, the separator has the ability to adjust at many points that are important for the purity of the received fractions. ZIGZAG type separators are used in many areas: weight classification of metal granules purification of shredded scrap from the light fraction (films, plastics, paper) removal of volatile fraction during recycling of WEEE purification of plastics, rubber Lhodpfsua D Alex Aa Ejr purification of municipal waste, glass removal of dust Construction description: The ZIGZAG separator consists of individual components mounted on a common support structure. In the first part, the ZIGZAG module is installed. The module has an inspection hole and regulation of the material stream passage gap. In the second part there is a cyclone discharging the light fraction. Underneath the cyclone there is a variable speed sluice for ejection of separated materials. A fan with electronic speed control is located on top of the structure. The structure is designed in part for loading and unloading by conveyor belts. The separator has a control cabinet equipped with a safety system.

Condition: good (used), Year of construction: 1991, max. planing width 520 mm max. planing height 200 mm 4 cutterblocks slotted table lips electr. height adjustment with trolley Lhodpfx Ajiwi Ezja Ejr with knife setting gauge

Year of construction: 2011, condition: excellent (used), Operating hours 1,523 hrs. - Edge thickness max. 8mm - PLC control (program controlled) - glue height max. 60 mm - Joining unit in synchronous and counter-rotation (with diamond tools) - Gluing station cartridge - Pneumatic pressure unit - cross-cutting station pneumatic swiveling to 10 Lhedpfx Aaoma Sg Re Eor - Milling station motor adjustable (MOT4) DIA- tool - Keying station vertical pneumatic adjustable - swiveling pneumatic - Corner copying unit (diamond tool) - Radius scraper with motorized adjustment (MOT 2) - Surface scraper Dimensions: 454 cm length 120 cm width 161 cm height (upper edge of control panel)

Condition: like new (used), Horizontal carbon steel tanks 73.000l Dim. 3x 11m Cyllinder thickness 8mm Bottom thickness 12mm Ljdpfxeibh S He Aa Ejhr Equipped with a ladder.