Edgebander

HOLZ-HER Sprint 1321-2 STUF

Condition: used, machine/vehicle number: 008350, Type of edging: Thin edge, Thick edge, Solid wood Bdedpox A Tgyofx Abfei Gluing System: PUR, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 20 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, Year of construction: 2021, MEGA 300 TS Numerical Control Panel height 60 mm PVC/Abs mm 3 Feed speed up to 22 m/min Working height adjustable electronically by C.N. Motorized rubber belt with higher pressure Introduction system for small panels Panel support guide with electronic adjustment by C.N. Side roller conveyor with idle wheels for panel support Anti-adhesive group Rectifier unit with two motors electronically adjustable by C.N. Roll holder plate for delicate edges Edge magazine with 2 positions Gluing unit for EVA glue with glue tank and pre-melter Edge pressure group on straight profiles with pressure rollers electronically adjustable by C.N Non-stick group Trimming unit with 2 motors with automatic inclination adjustment Trimming unit with 2 superimposed motors Trimming / gleaning group with 2 tilting motors electronically adjustable by C.N. Rounding unit with 4 motors Edge scraper unit electronically adjustable by C.N. Bdjdst Hal Depfx Abfei Glue scraper unit Oscillating brush group Hairdryer group

Condition: used, - Working width (mm): 140 - Shafts: 7 1st shaft: bottom 2nd shaft: right Bdoderg Exrepfx Abfei 3rd shaft: left 4th shaft: right 5th wave: top 6th wave: bottom 7th wave: uni-wave

Condition: good (used), Year of construction: 2015, Atlas Copco Oil Free Screw Compressor with built-in Air Dryer Model SF2+FF 7.75 bar / 112 PSI Year 2015 Bdodoy Iplfjpfx Abfei 400 volts three phase, 2.2 KW / 3 HP, 2885 RPM 8.9 CFM / 4.21 lts/s Very little use Ex Pharma Facility

Condition: used, Year of construction: 2016, Used Machine Year of Manufacture: 2016 Condition: Overhauled by a Holz-Her specialist Features and Technical Specifications: - Base machine with manual pressure bridge adjustment - Extendable workpiece support, distance: 600 mm - FG 201 jointing unit with 2 milling heads, including 70 x 48 x 30 mm Z 2 diameter cutters Bdjdpfxjzk N U Ao Abfji - Edge feeder 1903, single-feed, automatic transport of roll and strip stock - Glu Jet GJ 301 gluing system with automatic glue height adjustment (probing nozzle) - With magazine for glue cartridges - Pneumatic pressure unit 1912-3; first roll driven with pneumatic immersion control - Trimming unit 1918, pneumatically swiveling 0–10 degrees - Multifunction milling unit 1827 MOT 4 with pneumatic package, including dia. cutters - Profile milling unit 1832 for corner copying with radius cutters - Scraper unit 1929 MOT 2 - Chip collection box - Surface scraper FK 701 - Polishing unit 1940 - New main heater - Minimum workpiece length (mm) 160 - Workpiece thickness (mm) 6–60 - Edge thickness (mm) 0.4–6 - Feed speed (m/min) 10 - Overall length (mm) 4930 - Weight (kg) 1420 Availability: available immediately Location: 63934 Röllbach

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, input voltage: 380 V, workpiece height (max.): 60 mm, edge thickness (max.): 8 mm, actuation type: electric, total height: 1,774 mm, total length: 4,580 mm, overall weight: 1,450 kg, Equipment: CE marking, documentation/manual, Workpiece thickness for edging: between 8 and 60 mm; edge thickness up to 8 mm depending on the unit. Components: - calibration, - edge feeding, - gluing, - end trimming, - milling group; flat or profiled milling of upper or lower edges, - profiling milling unit, - scraper group, - polishing station. Pressure bridge, infeed stop, control panel. Year: 2017. Refurbished in our workshop and inspected by a HOLZHER technician. Fitted with new diamond tools. Bjdpoytp Hrofx Abfedi

Condition: used, machine/vehicle number: 007848, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Bodjwkrqpopfx Abfjdi Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 20 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: excellent (used), Year of construction: 1997, Single shaft shredder form Weima Model -WL6S Main motor -22kw Bdedeivpthopfx Abfoi

Condition: new, Year of construction: 2025, functionality: fully functional, power: 9 kW (12.24 HP), cutting height (max.): 82 mm, saw blade diameter: 315 mm, rotational speed (max.): 4,400 rpm, total length: 3,300 mm, total width: 3,350 mm, overall weight: 3,000 kg, cutting length (max.): 3,300 mm, feed rate X-axis: 100 m/min, feed rate Z-axis: 150 m/min, saw blade speed: 4,400 rpm, saw drive: 9,000 W, Equipment: rotational speed infinitely variable, SCHEER PA 4500 – 3300 x 3350 S7WIN10 Year of manufacture: 2025 | Condition: NEW | Control: PA-WIN10 + SIMATIC S7 | Powerful panel dividing system for highest precision & efficiency The SCHEER PA 4500 is a robust, industrially proven panel dividing saw for the precise processing of coated and uncoated wood-based panels. It was designed for demanding applications and already meets all the requirements of modern cutting operations in its basic configuration. Main technical data: Cutting length (max.): 3300 mm Cutting height (stepless): up to 82 mm Main saw blade: Ø 315 mm | 60 teeth | cutting width 3.2 mm Scoring saw blade: Ø 200 mm | conical | cutting width 3.2–4.0 mm Saw motor: 9.0 kW Scoring motor: 1.1 kW Saw carriage drive: 2.32 kW Main saw blade speed: approx. 4400 rpm Saw carriage feed: 0–100 m/min (stepless adjustable) Saw carriage return: 150 m/min (lowered) Electrical connection: 400V / 50Hz / 3Ph Pneumatics: 6 bar, 15 NL/stroke Extraction: 3 x 140 mm | Capacity: 3300 m³/h at 20 m/s Working height: approx. 930 mm Angle stop: left Machine concept & highlights: Heavy cast honeycomb construction for vibration damping Absolute value encoder for highest positioning accuracy (no referencing) Distance- and time-optimized saw carriage operation Automatic oil mist lubrication & blowing of the guides Program-controlled saw blade adjustment (height & scoring side) ProLock quick-release system for the saw blade “wood dust tested” – emission only 0.65 mg/m³ System equipment: 1x angle pressing device WP 8500-1400 Adjustment range: 0–2200 mm Pressing force: approx. 480 N Cycle-controlled retraction function for panel transport 1x material feed table HP 5130 – 33 x 33 Mounted at the back with hardened guides & racks Roller conveyor system for easy panel transport 6 clamping fingers (spacing: 70 / 262 / 454 / 838 / 1173 / 2630 mm) Servo drive with ±0.1 mm accuracy 1x angle stop table HP 5137-1-1465 1x workpiece support table HP 5135-1-1465 Pertinax coating, each 1465 x 800 mm 1x air cushion unit LK 5169 central radial fan, pressure max. 2800 N/m² 1x control cabinet dustproof, separately mounted, vibration protected Bedpfx Aswrpcxebfsdi 19" TFT flat screen, keyboard, trackball Control & software: SIMATIC WinLC RTX soft PLC with S7 functionality PA-WIN10 operating interface on Windows 10 Professional (64 bit) (update to the latest Windows version possible at any time) True-to-scale real-time simulation and graphical cutting plan editor Integrated interfaces (label printing, panel warehouse management, etc.) Network-capable, future-proof, modularly expandable Operating modes & operation: Manual operation: single, chain dimension, trimming, residual cutting Automatic operation: cutting plan processing, online order processing Editor: parts list-based planning & optimization Maintenance & diagnosis: saw blade measurement, individual control, and more 📞 Contact us for an individual offer or a viewing. Delivery, installation, commissioning, and training possible as options.

Condition: used, Year of construction: 2008, Panel dividing saw Manufacturer: Holzma Type: HPP 350/43/38 Year of manufacture: 2008 Technical data - Control system: CADmatic 4 - Optimization program: CAD-Plan 4 - Saw blade overhang: 80 mm - Saw carriage feed rate forward/backward: 1-150 m/min / 150 m/min - Feed rate of the program cut forward/backward: 90 m/min / 90 m/min - Main saw motor: 13.5 kW - Scoring saw motor: 2.2 kW - Working height: 920 mm - Main saw blade: 350 x 4.4 x 60 mm - Scoring saw blade: 180 x 4.4 - 5.4 x 45 mm - Cutting length: 4300 mm - Cutting width: 3700 mm - Label printer Pica 108 - Processing package for gypsum fiberboards - Annual maintenance and inspection by Homag Bsdpfx Aszuy N Eobfsdi - New PC in 2021 (Win10) and updated machine control software and CadLink Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.