Hofmann jointer

Hofmann AHW 500

Condition: used, Year of construction: 1979, Working width 510 mm Length of the planing table 2700 mm Number of knives 2 St. Dimensions (L/W/H) 2700x1100x1000 mm Hodpevxa Igsfx Ad Rsn weight of the machine ca. 1000 kg

Condition: good (used), Year of construction: 1984, SAC used jointer planer SAC FS 430 - 430 mm planing width - 2.90 m table length - 120 mm cutterhead with 4-knife strip knives - 3 kW, 380 volt motor - Automatic motor brake - 8 mm depth of cut - Fence tiltable up to 45° - Swing-away Aigner auxiliary fence - Bridge-type knife guard (cutter cover) - Low-noise design with serrated steel table lips - Extraction port - Weight: approx. 650 kg Location: at customer site - immediately available - Hedpex Nrvvefx Ad Ren Subject to prior sale

Condition: used, Year of construction: 1999, Carriage length: 3800 mm Cutting width at the width stop: 1500 mm Cutting width at the cross-cut fence: 3200 mm Cutting depth: 140 mm Scoring unit: no Saw blade height adjustment: electric Hsdpfx Adevxi Ddj Rsn Swivel adjustment saw blade: electric Width stop adjustment: electric / position control Saw blade angle display: digital Cutting height display: - Width stop display: Digital Cutting ruler display: Scale Saw blade diameter: 400mm Speeds: 3 Motor power: 7,5kW Motor brake: Yes, automatic Suction connection: 80mm and 120mm Machine length: 3900mm Machine width: 2200mm weight: 1000kg

Condition: good (used), Swivel Spindle Milling Machine, Table Milling Machine, Bench Milling Machine -Spindle adjustment: height and angle Hjdpeh Nvyzsfx Ad Ron -Swivel: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm -Feed apparatus Holz-Her 3 rolls -Useful shaft length: 100 mm -Spindle: Ø 30 mm -Max. Milling cutter: Ø 220 mm -Dimensions: 1540/1100/H1520 mm -Weight: 962 kg

Condition: reconditioned (used), Year of construction: 1962, machine/vehicle number: 7867/162, functionality: fully functional, Power connection 400V 4,0kW suction connection 1x Ø 100 mm, 1x rectangular 300x140 mm spindle Ø 30 mm height adjustable via handwheel spindle brake via line pull Spindle lock via locking pin right/left rotation 2 speeds spindle not tiltable LxDxH: 1060 x 960 x 1100 mm weight approx. 650 kg Hedoh Ux Rwopfx Ad Ron Unfortunately, we cannot answer inquiries without complete contact information.

Condition: new, functionality: fully functional, input voltage: 400 V, planing width: 310 mm, number of blades: 30, rotational speed (max.): 4,000 rpm, total length of planing tables: 1,300 mm, overall weight: 180 kg, Equipment: CE marking, Application of a helical cutterhead with replaceable carbide knife inserts, which reduces noise levels by approximately 50% and extends sharpness more than 20 times compared to a conventional straight knife cutterhead. The advantage of carbide inserts is that, in case of damage, individual knives can be replaced or rotated, which significantly reduces operating costs. The carbide-tipped blades provide tear-free planing and optimal smoothness with every type of wood. Quick and hassle-free folding tables allow fast conversion to thicknessing mode. Integrated, tiltable chip extraction device - connection diameter 100 mm. Both tables are equipped with precision adjustment systems and noise-reducing covers. The planer table is centrally mounted on the guide column with a support bracket. Stable fence with prismatic guide, tiltable from 90° to 45°. Tables are made of cast iron with polished work surfaces. Cutterhead guard included. Hodpfx Aoyt I H Dsd Ren Technical Specification Voltage: 400 V Dimensions (W x D x H): 1300 x 900 x 1180 mm Weight approx.: 180 kg Planer Planing width: 310 mm Cutterhead speed: 4000 rpm Working height: 990 mm Number of knives/inserts: 30 pieces Cutterhead diameter: 75 mm Planing fence: 1110 x 130 mm Fence tilting range: 90° - 45° Max. chip removal in planer: 5 mm Planer table length: 1300 mm Thicknesser Thicknesser table length: 600 mm Thicknesser planing width: 305 mm Minimum workpiece height: 5 mm Maximum workpiece height: 180 mm Max. chip removal in thicknesser: 2.5 mm Feed speed: 8 m/min Dust extraction port diameter: 100 mm Motor power: 3 kW Motor power S1 100%: 2.2 kW

Condition: new, functionality: fully functional, planing width: 530 mm, number of planer blades: 4, Equipment: motor brake, Houfek R 530 surface planer - 400V/50Hz, 5.5 kW (7.5 HP), width 530 mm 1.1 Motor 5.5 kW (7.5 HP), Tersa cutterhead 1.2 Total work table length 3100 mm 1.3 Dimension of the guide ruler 1300x150 mm with tiltable auxiliary ruler 1.4 Planed table 1.5 Upper control panel with ELGO Z60 digital display Electronic adjustment of the take-off 0 - 7 mm Tilt angle of the tiltable ruler 0°- 45° - Digital display Adjustment of the input table inclination (pointed/hollow joint) 1.6 Cover for the SUVAMATIC planing roller 1.7 4-knife planing roller D=120 mm 1.8 Automatic star/delta start of the motor 1.9 Electromagnetic brake 1.10 Suction nozzle with outlet D=150 mm 1.11 Blade setting gauge 1.12 Voltage 400V/50Hz 1.13 Packed in PE film as standard 1.14 Machine built according to CE power and safety standards Hedpfx Aju Rnqqjd Ron

Condition: reconditioned (used), Year of construction: 1988, functionality: fully functional, This 2A576 radial drilling machine has been completely overhauled and restored to full producbon capacity. Basic technical data: Drilling diameter: in steel 80 mm / in cast iron 100 mm Headstock travel along the arm: 2000 mm Max drilling radius: 2500 mm Spindle travel: 500 mm Spindle: ISO50 Stepless sefng of spindle feed rates Spindle speed range: 2-1600 rpm. Column diameter: 500 mm Main drive engine power: 7.5 kW Dimensions L/W/H: 4180/1280/4125 mm Weight: 12 tons Hodpfx Aeur H I Ned Rjn This drilling machine meets the minimum safety and health requirements set out in Direcbve 2009/104/EC, known as the "Tools Directive". Machine ready for checking under power in our warehouse in central Poland.

Condition: used, Working width 610 mm Hjdpfxowy Itlj Ad Ron Working height 200 mm Motor output 4,4 kW Feed speed 7-14 m/min. weight of the machine ca. ca. 1.150 kg

Condition: ready for operation (used), Year of construction: 1981, WEINIG Hydromat H25R, S/N 2603-624, year of manufacture 1981, with walk-in acoustic enclosure KASCHWIG – ALMOST NEW from 2017 • Short infeed table with heavy-duty 6-roller infeed 1st spindle bottom 11.0 kW 2nd spindle right 11.0 kW 3rd spindle left 11.0 kW 4th spindle top 15.0 kW 5th spindle bottom 11.0 kW 6th spindle bottom 11.0 kW • Hydraulic feed 6-60 m/min. • Feed motor 22.0 kW • 4x powered table rollers • Spindle diameter 50 mm • Automatic table lubrication • Spindles 1 + 4 + 5 + 6 with counter-bearings • Spindles 1 + 4 with straight jointer • Feed rollers 170 mm • 4 pcs. hydro planer heads 150 mm • 6 pcs. hydro planer heads 250 mm • Extraction hood above the machine Hjdpfjtkt Tpex Ad Rsn