Welding Table

HISWeld HIS16V31510

Condition: used, Year of construction: 1968, roll diameter 500 mm throat 1050 / 485 mm workpiece height 300 mm saw band length 3920 - 4050 mm cutting speed 15 - 940 m/min table height 1040 mm table surface area 750 x 800 mm Table tiltable 15 Grad total power requirement 4,0 kW weight of the machine ca. 1750 kg dimensions of the machine ca. 2100 x 1000 x 2100 mm - Unique mitering range left/right up to 30° acute angle - Mitering adjustment via lockable detent every 15° - Adjustable saw blade for optimum cutting angle - Hydraulic clamping device on both sides - Electric blade breakage monitoring - Smooth-running saw carriage via preloaded recirculating ball bearings Hsdjiqp Eropfx Acgefl - Additional table 450 x 450 - Machine light

Condition: used, Technical details: plate width: 800 mm coil weight: 12 t sheet width - max.: 800 mm sheet width - min.: 300 mm thickness of strip/band: max. 5,0 mm band speed: 4,5 / 25 m/min work height max.: 1700 mm Payload: 12,0 to (Coil) Weight approx.: 7,3 + 6,62 t dimensions of coil: 3,2 x 1,9 x 2,7 m dimension machine xH: 2,5 x 2,6 x 2,45 m Decoiler with loading device Can optionally be sold together with stock no. 0100571. straightening unit: Infeed rollers: 2 x Ø 144 x 850mm Straightening rolls: 3 x bottom rolls, rigid, Ø 100 x 850mm, 30mm adjustable 3 x top rollers, Ø 110 x 850mm; 30 mm adjustable Coil unwinding machine: Outer Ø 1.500mm Strip width max. 800mm Load capacity max. 12 to Clamping Ø 470 - 630 / 570 - 730mm Transport unit LxWxH: 1700 x 1500 x 1000mm; crosswise running, with prism support 1000 x1000mm Hfjdpeu Ic Avjfx Acgjl Machine will be offered and sold with Stock no. 0100521 as a decoiling and streightening line. *

Year of construction: 2013, condition: used, Kuka industrial robot with 6 articulated axes with point-to-point positioning. Independent control panel Hfsdpfx Aor Am Sqocgjl Panel alignment table Barcode reader on the robot arm Panel introduction system via: * 1 motorized roller conveyor for panel stack preloading * 1 motorized translating roller conveyor * 1 motorized roller conveyor for panel stack unloading Technical features: * Type: KR210-2 * Number of axles: 6 * Admissible nominal load: 210 Kg * Machine weight: 1267 kg * Sound level: 75dB * Installed power: 25.8 KW * Panel dimensions - Min\max length: 300\3000 mm * Panel dimensions - Min\max width: 180\1500 mm * Panel dimensions - Min\max thickness: 8\60 mm * Max panel weight: 90 kg

Condition: new, table length 2400 mm table width 1200 mm table height 200 mm material thickness 25 mm weight 920 kg Manufacturer: GERD WOLFF Technical Details: • Length 2400 mm • Width 1200 mm • Height 200 mm • Weight 920 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Hfodpjynbmmofx Acgel Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 6 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Condition: used, Guard Rail Roll Forming Line: • The production line for road safety barriers consists of: • Accessories and rollers for the production of 2- and 3-wave guard rails • Bending machine for 2- and 3-wave profiles • 19-station roll forming machine, complete with rollers and motorization • No. 3 punching stations Hedpfexnmmqox Acgefl • No. 1 cutting station • No. 7 hydraulic power units • No. 1 station with feeding rollers

Condition: new, Year of construction: 2025, functionality: fully functional, coil outer diameter: 1,500 mm, coil inner diameter: 508 mm, product height (max.): 200 mm, feed length X-axis: 1,520 mm, feed length Y-axis: 3,020 mm, feed length Z-axis: 80 mm, warranty duration: 24 months, total height: 2,380 mm, total length: 8,900 mm, total width: 2,300 mm, load capacity: 1,300 kg, input frequency: 50 Hz, input voltage: 380 V, overall weight: 180 kg, repeat accuracy: 0.02 mm, workpiece weight (max.): 15,000 kg, Equipment: cooling unit, GS-J Series has various workbench sizes such as 3015, 4015, 4020, 6015 to meet different processing needs Suitable for batch processing of thin plates with high flatness requirements of 0.6-3.0mm Uncoiling machine parameters: Maximum weight of coil (kg): 15000 Coil width (mm): 200～1524 Coil outer diameter (mm): Φ800～Φ1500 Coil inner diameter (mm): Φ508mm~Φ610mm (cast iron pad) Coil thickness: (mm) 0.6-2.0mm (stainless steel) ≤1524mm 0.8-3.0mm (carbon steel) ≤1524mm Feeding length (mm): 0～ Maximum stroke of equipment Unwinding speed (m/min): 0～15 Moving speed (mm/s): 0-8 Lifting speed (mm/s): 3.0 Lifting stroke (mm) : 350 Leveling flatness (mm/㎡): ≤±3 Fixed feeding line height (mm) : 870 Sizing accuracy (mm/m) : Length direction ≤±0.2 Diagonal direction : ≤±0.8 Revolutionize Your Coil Processing with One Machine, Five Functions! Uncoiling, leveling, feeding, cutting, and blanking – all in one seamless automated system for maximum efficiency. Smart, Flexible & Versatile - Effortlessly cuts special-shaped workpieces, adapting to diverse production needs - Optional touchscreen control with top-tier international cutting systems Hfodjv Awguepfx Acgsl - High-quality drag chain cables – durable, bend-resistant, and interference-free

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 000326, number of straightening rollers: 7, coil weight: 7,500 kg, coil outer diameter: 1,800 mm, coil inner diameter: 508 mm, product height (max.): 5 mm, number of feed rollers: 2, straightening roller diameter: 50 mm, sheet thickness steel (max.): 5 mm, coil width: 800 mm, Lg 35024 Belt conveyor in long design LORENZ BRM 50/820.7-HH7500.1 Coil weight max. 7500 kg Coil width max. 800 mm Hodpfxstrlzao Acgjfl Material thickness 0.8 to 5 mm (steel with yield point approx. 300-350 N/qmm) Number of straightening rollers 7 Further data and detailed offer on request.

Condition: used, Wall-mounted slewing jib crane with hoist, slewing drive, and trolley ABUS Wall-mounted Slewing Jib Crane Type VW (3200kg x 6250mm) Serial No. 152 B8-16589596-0010 Year of manufacture: 2014 Load capacity: 3200 kg Slewing range: 180° Outreach, jib tip to wall: approx. 6640 mm Minimum outreach (crane hook to wall): approx. 1450 mm Maximum outreach (crane hook to wall): approx. 6250 mm Trolley travel distance: approx. 4800 mm Hook distance from jib tip: approx. 400 mm Distance from top edge of slewing motor to crane hook: approx. 1500 mm Jib length without wall bracket (slewing bearing): 6530 mm Total height with wall bracket (slewing bearing) and mounted components: 2590 mm (overall height) - Jib profile: double-T steel beam (height 600 x width 220 mm) - Jib electrically slewing via geared motor (2 speeds) Hfsdpfx Acowzmi Iogsl - Electric slewing drive with limit and preliminary limit switches - Slewing angle end positions with electric end and preliminary limit switches - Painted in ABUS Yellow (original paint) - 2 wall flanges 340 x 280 mm, each with 6 Ø 27 mm holes - Mounting surface for wall flanges (W x H): 340 x 2500 mm Very good condition Hoist, Electric Wire Rope Hoist Trolley ABUS Type GM 800.3200H-202.41 6000.4.E100.20 Serial No. 250 B8-16589596-0010 Year of manufacture: 2014 Rated load: 3200 kg Reeving: 4/1 Lifting height: max. 6 meters Lifting speed: 5 meters/min. Creeping (fine) lifting speed: 0.8 meters/min. Trolley travel speed: approx. 4.5 and 19 m/min. - Control via radio remote and emergency control via pendant on cable - Trolley travel with electric drive, with limit and preliminary limit switches - Approx. 20 operating hours - Last inspection: April 2024 at 19 operating hours Wire rope hoist weight: 250 kg Space required for transport (L x W x H): 6640 x 1400 x 2470 mm Total weight jib with wire rope hoist: 1500 kg Very good condition

Condition: new, Year of construction: 2026, functionality: fully functional, total height: 850 mm, total length: 3,000 mm, total width: 1,500 mm, table height: 850 mm, table width: 1,500 mm, overall weight: 800 kg, height adjustment type: mechanical, Welcome, The welding table manufacturer, ATRIBU, offers a new welding table designed for both professional industrial environments and demanding hobbyist workshops. Short Description: DIMENSIONS: Tabletop: 3000 x 1500 mm with 200 mm high side walls. Both tabletop and side walls are 15.0 mm thick. HOLE SYSTEM: Precision-milled and chamfered holes, System 28 mm, 100 x 100 mm grid, with engraved scale/grid. MATERIAL: S355 J2+N Steel (high-strength structural steel). REINFORCEMENTS: Internal ribbing (160 x 6 mm plates) spaced every 40 cm for maximum stability. TOLERANCES: Maximum deviation of 0.5 mm per meter length. Maximum angular deviation of 0.5°. LEGS: 80 x 80 x 3 mm profiles, bolted, height-adjustable with swivel feet. Height adjustment range: 85–90 cm. PRICE: The price includes the table with standard metal-profile legs (wheels are not included in the base price). Swivel castors in various load capacities are available as an option for an additional fee. Full VAT invoices are issued. Detailed Description: Our tables are manufactured from high-grade S355 J2+N steel. The use of harder structural steel significantly reduces premature hole wear and ensures maximum structural durability. All holes are precision-milled and chamfered for optimal fit and tooling quality. Side walls are also made of S355 steel and feature a double row of holes. Table flatness remains within a maximum tolerance of 0.5 mm per meter. For tables of this size, we typically achieve a flatness of 0.2 mm per meter, ensuring near-perfect surfaces. The tabletop is protected with a mill scale layer for initial corrosion resistance. Additionally, each table is treated with a professional anti-spatter agent with a corrosion inhibitor prior to shipment. [Our welding tables are not plasma nitrided.] Robust internal ribbing provides necessary rigidity, even when welding heavy or complex assemblies. We also supply a full range of professional tools and accessories. Shipping: Affordable shipping across Europe is available (approx. 50–300 EUR depending on table dimensions). VAT Information: For private customers: Local VAT rates apply. Intra-community supply (B2B): With a valid EU VAT number, purchase at 0% VAT is possible. Custom Orders & Other Systems: Need a different size or thickness? We are happy to design and manufacture a customized solution for your requirements. Available Systems & Specifications: Hole Systems: System 28 / System 16 Tabletop Thicknesses: 8.0 mm / 12.0 mm / 15.0 mm Standard Sizes: 1200 x 800 mm 1200 x 1200 mm 1800 x 800 mm 2000 x 1000 mm Hfsdpey Atrxsfx Acgel 2400 x 1200 mm 3000 x 1500 mm Options: Wheels with 300 kg or 100 kg load capacity, HEX grid (additional holes), 50 x 50 mm grid. Available Accessories: Table extensions, towers, clamps, squares, bolts, accessory organizers, and more. Note: Welding tables are supplied without accessories. Please consult our catalog to select your tooling set. How to Order / Contact Us: Inquiry: Please send us an email with your requirements (size, thickness, etc.). We highly recommend requesting our comprehensive catalog, as selecting the right accessory set is essential for efficient work. Order: Once you’ve finalized your configuration, orders can be placed via email. We look forward to hearing from you! We welcome both long-term cooperation and single orders. Best regards, Team ATRIBU

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 350 h, load capacity: 200 kg, empty load weight: 6,700 kg, construction height: 1,970 mm, fuel type: electric, total length: 6,050 mm, drive type: Elektro, arm reach: 7,600 mm, construction width: 1,500 mm, working height: 15,000 mm, Articulating boom lift Technical condition: normal Hedjxuw Nvspfx Acgjfl Front tires type: solid rubber Front tires condition: 80 - 100% Rear tires type: solid rubber Rear tires condition: 80 - 100% Description: The Manitou 150 AETJ-C electric articulating boom lift is the lightest in its class, which means it exerts relatively low ground pressure with its wheels. With a lifting capacity of 200 kg and a working height of up to 15 m, this self-propelled work platform is the ideal solution for your transport and maintenance tasks. The drive battery can be recharged frequently and stands out for its long service life. In transport mode, the 150 AETJ-C remains under 2 m in height. Thanks to its compact design, it is easy to find storage space for this lift. Efficient work at height is made possible by the performance of the AETJ 150-C’s articulated platform. This electric model for two operators offers a maximum working height of 15 meters and features a basket with a perforated floor, perfectly suited for industrial requirements. With its articulated boom and robust construction, this machine can also operate in confined spaces. Avoid obstacles and improve responsiveness with the 150 AETJ-C. Thanks to the pod’s high autonomy, you can work all day without needing to recharge the machine.