Hettich Blue Max hinge drill

Hettich Blue Max

Condition: used, Year of construction: 1997, Used machine Year of construction: 1997 Condition: workshop checked Gjdpfx Aozk Nu Aehneiw Fitting drilling head Drilling unit 3/4 spindles Clamping cylinder 2 pieces Motor power 0.8 kW Connection 400/50 Volt / Hz Machine dimensions Length 950 mm width 650 mm Height 700 mm Weight 80 kg Availability: short term Location: Röllbach

Condition: new, Year of construction: 2026, Kudu automatic drilling machine with NC control and manual tool change (3-axis) automatic drilling machine with a mobile processing unit - the table remains stationary, the drilling head moves. The drilling machine can be used both manually and fully automatically. After each drilling process, the processing unit moves to the next drilling position fully automatically in the X and Y axes. Operation is kept very simple. The system is programmed directly on the machine control. The system is very robust and consists of proven machine components. Technical data: • Measuring length: 6,000 mm • Total length: 8,000 mm • Stable machine base • Drilling head speed: up to 2800 rpm • Tool holder: HSK 50 • Drive of the X, Y and Z axis via servomotors • Rapid traverse in the X Axis: 18 m/min • Rapid traverse in the Y-axis: 5 m/min • Distance between the top edge of the table and the bottom edge of the tool holder 245 mm • Table width 450 mm • Working height: 1005 mm • Drilling diameter: 3 to 15 mm in St. 50 (depending on the tool) • Machining path in the Y-axis: 230 mm • Tolerance in the X-axis: +- 0.1 mm/m • Tolerance in the Y-axis: +- 0.05 mm • Tolerance in the Z-axis: +- 0, 05 mm • System weight: 2000 kg • System dimensions: 8000 mm x 2000 mm x 2388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Protection of the system at the front via light barrier • Access protection at the rear, machine fence • Simple programming of the machine • Cooling takes place by means of a minimum quantity spray system • Without material clamping vices • Digital hand wheel Your advantages • The surface of the workpieces is protected • Clear, graphic surface • Machining directly at the end of the workpiece is not difficult • 50% space saving compared to pushing machining • Chips are collected in the chip tray • Simplest programming and operation Gijdpsfu Iwmefx Ahnew It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: used, Year of construction: 1996, with 1 drilling head used Giedjzkvyxjpfx Ahnew in top condition cleaned functionally tested Manufacturer: Hettich Type: Blue Max Mini Year of manufacture: 1996 Machine No.: 06316 CE type approval Number of spindles: 4 Drilling feed: pneumatic Table model, length x width: 800x400mm Swinging stops: 4 Drill chuck: shank 10 mm Dust extraction connection: 50mm Space requirement approx. L x W x H mm: 800x600x650 Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty and guarantee

Condition: excellent (used), Year of construction: 2003, Hettich Blue Max hinge drilling machine, type: Blue Max 19 - FS Number of spindles per row of holes: 11 Godozhx D Uspfx Ahnsiw Number of horizontal spindles: 5 Pot-joint drilling head: yes Drill spacing: 32 mm Clamping device: yes / pneumatic Power consumption: 2.2 kW Stop rulers Accessories: many drill bits (see photos) Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1994, Frame press, Schafberger & Sprödhuber Gijdpfx Ajilurnehnew Type Super 4 kW 3 m x 6 m

Condition: used, Year of construction: 1992, Number of spindles per row of holes: 16 Number of horizontal spindles: 5 Godpfowv Nb Nsx Ahnjiw Cup hinge drilling head: yes Drill pitch: 32 mm Hold-down device: yes / pneumatic Power consumption: 2.2 kW Drilling unit: swivelling

Condition: used, Used machine Used Hettisch Blue Max hardware drilling machine Godpow I Um Tofx Ahnjiw Motor power: 0,8 kW Motor speed: 2800 rpm 4 drilling spindles with longitudinal stops one foot switch press-in die missing!!! Availability: by arrangement Location: Solingen

Condition: good (used), For fully automatic assembly of frame components. Frame outer dimensions: min. 120 x 120 mm max. 700 x 2,500 mm Gjdpfedhdg Isx Ahnoiw

Condition: used, Year of construction: 1997, Used machine Year of construction: 1997 Condition: workshop checked Fitting drilling head Drilling unit 3/4 spindles Clamping cylinder 2 pieces Motor power 0.8 kW Gedpfjw I Ugtjx Ahneiw Connection 400/50 Volt / Hz Machine dimensions Length 950 mm width 650 mm Height 700 mm Weight 80 kg Availability: short term Location: Röllbach

Condition: used, used, great condition, little usedMake HettichType Blue Max mini PMPneumatic drill feedStorage location 97447 Gerolzhofen, freely loaded, unpackedHandover in the current condition as seen,without guarantee and guarantee Gsdpfx Ahsvwf Dqjnjiw

Year of construction: 1968, condition: good (used), machine/vehicle number: 00248, Offer 22311 Technical data: - max. working width 3100 mm - max. cutting capacity St 40 8 mm - motorized back gauge 10 - 750 mm - front angle gauge - stroke rate up to 30 strokes/min - drive 400 V / 2 x 6.5 kW - space required incl. back gauge, without front support arms - approx. W 4250 x H 1500 x D 2450 mm - weight approx. 11000 kg Gijdpfoh U Sd Hox Ahnjw