HERMLE - U740 - 2005

HERMLE

Condition: ready for operation (used), Year of construction: 2003, operating hours: 27,804 h, functionality: fully functional, machine/vehicle number: 16165, travel distance X-axis: 915 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN iTNC 530, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS X-axis travel: 915 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Number of axes: 5 Maximum spindle speed: 12,000 rpm Table length: 900 mm Table width: 500 mm Number of T-slots: 8 T-slot spacing: 65 mm T-slot width: 14 mm Maximum workpiece weight on table: 700 kg Maximum workpiece length: 900 mm Maximum workpiece width: 500 mm Maximum workpiece height: 500 mm Number of tools: 16 Maximum tool diameter: 125 mm Diameter with adjacent pockets empty: 180 mm Maximum tool length: 300 mm Ksdpsyhnudofx Ah Eedh Maximum tool weight: 6 kg Tool holder: SK 40 Milling head swiveling range: -5° to +95° Rapid traverse: Longitudinal: 30 m/min Cross: 30 m/min Vertical: 20 m/min MACHINE SPECIFICATIONS Compressed air connection: 6 bar Electrical connection: 50 Hz, 3 x 400 Volt Spindle drive power: 32 kW Total power requirement: 26 kVA Noise level: 78 dB (A) Dimensions & Weight Dimensions (L x W x H): 2,760 x 2,390 x 2,370 mm Machine weight: approx. 7,300 kg Operating Hours Power-on time: 86,672 h Operating time: 34,362 h Spindle run time: 27,804 h EQUIPMENT 3-jaw chuck Ø 200 mm Workpiece probe HEIDENHAIN TS 640 Rotary table 4th axis HOFMANN type RW/NC-160 Rinsing gun RS 232 interface Ethernet interface Electrical cabinet air conditioning unit

Condition: ready for operation (used), Year of construction: 2014, operating hours: 37,684 h, spindle speed (max.): 18,000 rpm, overall weight: 30,000 kg, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 900 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, number of axes: 5, This 5-axis HERMLE C60U Dynamic was manufactured in 2014. It features impressive travels of approximately 1200 mm in X, 1300 mm in Y, and 900 mm in Z. The machine is equipped with a NC swivel rotary table with a diameter of 1350 mm and a spindle speed of 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the HERMLE C60U Dynamic universal machining centre we have for sale. Contact us for further details. • Supply voltage: 400 V / 3~ • Mains frequency: 50 Hz • Control voltage: 24 V • Nominal current: 113 A • Power consumption: 78 kVA • Circuit diagram no.: 1-325-MS-96-021 • Axis configuration: 5 axes (X, Y, Z + A/C rotary table) • Software option: KinematicOpt • Tool interface: HSK-A 63 • Table type: NC swivel rotary table • Table diameter: Ø 1350 mm • Table size: 1350 × 1100 mm • Electronic thermal compensation (iTNC) • Electronic handwheel (iTNC) • Operating hours: 37,684 h • Spindle renewed approx. 600 operating hours ago • Exclusions: Clamping devices, tool holders, tools and zero-point clamping systems shown in pictures are not included Additional equipment • Through-spindle coolant, 80 bar (high-pressure) • Air blow device • Air through spindle centre • Chip flushing gun • Emulsion mist extraction • Probe: Heidenhain measuring probe • Tool breakage monitoring: BLUM Kjdsylzc Nspfx Ah Eodh

Condition: ready for operation (used), Year of construction: 2007, operating hours: 14,000 h, spindle speed (max.): 18,000 rpm, overall weight: 10,500 kg, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, controller manufacturer: SIEMENS, controller model: 840 D, number of axes: 5, This 5-axis HERMLE C40U universal machining centre was manufactured in 2007. It features a travel of 850 mm in the X-axis, 700 mm in the Y-axis, and 500 mm in the Z-axis, with a rapid traverse of 45 m/min. The machine is equipped with a spindle speed of 18,000 rpm and a tool changer with 38 positions. If you are looking to get high-quality machining capabilities, consider the HERMLE C40U machine we have for sale. Contact us for further details. • Operating voltage: 400 V / 3~ • Mains frequency: 50 Hz • Control voltage: 24 V • Total power: 41 kVA • Total nominal current: 60 A • Master circuit diagram: 1-322-MS-96-002 • Rapid traverse: 45 m/min • Tool changer: 38 positions • Axis configuration: 5-axis • Linear axes: X, Y, Z • Rotary axes: A-axis (off-centre), C-axis (NC swivel rotary table Ø420 mm) • NC swivel rotary table: Ø420 mm • Internal coolant supply (IKZ): 80 bar • Laser tool measurement / breakage monitoring • Measuring probe: Heidenhain • Electronic handwheel • Electronic thermal compensation • Spindle hours: approx. 14,000 h (spindle replaced 11.2017) • Accessories: Without tools, tool holders and zero-point clamping systems Additional equipment • Paper band filter • Chip conveyor • Chip flushing gun • Oil mist extraction Technical Specification Taper Size HSK 63 Kjdpfxsyly A Ij Ah Eodh

Condition: ready for operation (used), Year of construction: 2009, operating hours: 9,192 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 16,000 rpm, number of axes: 3, This 3-axis HERMLE C 1200 vertical machining centre was manufactured in 2009. It features an impressive X-axis travel of 1200 mm, Y-axis travel of 900 mm, and Z-axis travel of 500 mm. The machine is equipped with a spindle speed of 16,000 rpm and includes 30 tool stations. If you are looking to get high-quality machining capabilities, consider the HERMLE C 1200 machine we have for sale. Contact us for further details. • Tool magazine: 30 stations • Table: Rigid clamping table • Coolant system • Electronic Thermal Compensation (iTNC) • Machine on hours: 11,927 h • Spindle on hours: 9,192 h Additional equipment Kdodpfjylw Stjx Ah Eoh • Chip conveyor • Heidenhain touch probe • Electronic Manual Control Module (iTNC) Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2000, Two Hermle C 800 V machining centres for sale. Kedjylkzzepfx Ah Esdh Hermle C 800 V Year of manufacture: 2000 Control: Heidenhain TNC 430 Technical specifications: X-axis: 800 mm Y-axis: 600 mm Z-axis: 500 mm Table clamping surface: 1000 x 560 mm Max. table load: 1000 kg Distance spindle/table: 100–500 mm Spindle speed: 8000 rpm SK40 30 tool changer positions

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TC 530, spindle motor power: 15,000 W, swivel angle C-axis (max.): 360 °, number of axes: 5, This HERMLE C30U Vertical Machine Center was made in the year 2006. It is equipped with a HEIDENHAIN TC 530 control unit and has 5 axis. The machine has a spindle speed of 18000 rpm. There are 2 identical units available. Machine Benefits Kdsdox D I Saspfx Ah Esh Technical Machine Benefits • Maximum tool capacity 32 • Spindle connection (spindle) din 69871 • Renishaw system predisposition • Air blow through dry machining spindle: yes • 5 axis continuous package: yes • Internal cooling

Condition: used, Year of construction: 2016, x-travel 450 mm y-travel 600 mm Ksdpoylz A Njfx Ah Esdh z-travel 330 mm weight of the machine ca. 9000 kg t

Condition: new, 3-fold attachment table for Hermle C20U, with 3 rotary tables rotating synchronously, programmable via the C-axis. Also available for C800U, B300U, C600U, C30U, C250U, and C32U. In use at renowned companies multiple times over the past 20 years. Machine 3 workpieces simultaneously, reducing tool changes and increasing machine uptime. For inquiries, contact: huber-cnc.com Kdodpfx Ajylyqfsh Eoh

Condition: used, Year of construction: 1989, x-travel 600 mm y-travel 450 mm z-travel 400 mm table-size 850 x 440 mm spindle taper SK 40 control HEIDENHAIN TNC 355 ATC 32 Pos spindle turning speed range 20 - 4000 U/min spindle drive 5,9 kW quill stroke 80 mm feeds longditudinal/cross/vertical 1 - 2000 mm/min power feed x/y/z 7200 N rapid traverse longitudinal and cross 10 m/min rapid traverse vertical 10 m/min total power requirement 12 kW weight of the machine ca. 3 t dimensions 2,7 x 2,5 x 2,0 m Acc.: NC-dividing unit (=4th axis) make WALTER with 3-jaw chuck 160 mmø, Kdodpfetqqn Dex Ah Eeh vertical head with hydr. tool clamping and quill retraction, solid table, various tool fixtures, electron. hand wheel, coolant

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, table load: 1,000 kg, spindle speed (max.): 16,000 rpm, spindle motor power: 15,000 W, tool weight: 6,000 g, number of axes: 3, This 3-axis HERMLE C600V vertical machining center was manufactured in 2001. It features a Heidenhain iTNC 530 CNC path control, 7,000 spindle hours, and a modified gantry design. The machine offers a rapid traverse of 35 m/min, a spindle speed up to 16,000 rpm, and a tool magazine with 30 positions. If you are looking to get high-quality milling capabilities, consider the HERMLE C600V machine we have for sale. Contact us for more information. • Spindle hours: 7,000 h • Machine design: Modified gantry design • CNC control: Heidenhain iTNC 530 with 15" TFT color screen • Flexible contour programming • 6 GB part program memory • 0.5 ms block processing time • Parallel operation with graphics • Thread cutting (rigid tapping; without compensating chuck) • Tool life monitoring • Ethernet interface • Feed drives • Feed force: 6,000 N • Rapid traverse: 35 m/min • Acceleration: 5 m/s² • Feed screw diameter/pitch (X/Y/Z): 40 / 20 mm • Measuring system: Direct scales, resolution 0.0001 mm • Position tolerance (Tp, VDI/DGQ 3441): 0.008 mm (X/Y/Z) • Main spindle • Torque (100% / 40% ED): 87 / 130 Nm • Taper: SK40 (similar DIN 2079), for tool holders per DIN 69871 A • Rigid clamping table • Table surface: 800 x 465 mm • Max load: 1,000 kg • T-slots: 7 slots, size 14 mm H12, spacing 63 mm • Guide slot (4th from rear): 14 mm H7 • Tool changer Kdjdpfxsx D Iawj Ah Eeh • Magazine positions: 30 • Max tool diameter: 80 mm (125 mm with free adjacent positions) • Max tool length: 250 mm • Max magazine load: 120 kg • Chip-to-chip (VDI 2852): 5.5 s • Coolant system • Extendable chip box and accessible chip screen • Tank: 200 L • Flow rate: 40 L/min at 3 bar • Utilities • Connected load: 400 V / 50 Hz • Power consumption: 22 / 35 kVA • Compressed air: 6 bar • Other features • Electrical thermal expansion compensation Additional equipment • Electronic hand control module (handwheel) • SK40 measuring probe system • Blow-off device • Chip flushing gun Technical Specification Taper Size SK 40