Bandsaw demonstration machine ARG130K

Hans Schreiner MBS-ARG130K

Condition: as good as new (ex-display), Block band saw Hauslhof CTR800S, demonstration machine Serial No. 69/21/007 The machine has the following accessories: 2 x extension section for block saws CTR800S, 3 m Ammeter for CTR Kfedpfovr I Riox Aa Eoa Saw band guide electrically adjustable for CTR Irrigation pump with automatic switch-on for CTR Saw band tensioning device hydraulic Pre-cutting device

Condition: new, Year of construction: 2025, Machine Features Automatic feed in the X, Y, and Z axes ensures precise machining of materials in three dimensions. Rapid traverse for all axes, along with stepless feed adjustment, enables efficient operation for a wide range of tasks. Digital display and user-friendly Schneider Electric control panel provide intuitive control over the machining process. Technical Specifications Table dimensions: 1600 × 360 mm Maximum table travel (X/Y/Z): 1300 × 300 × 420 mm Table T-slots (quantity / width / spacing): 3 / 14 mm / 95 mm Maximum table swiveling angle: ±45° Table feed speed: X/Y: 25–800 mm/min Z: 8–267 mm/min Spindle taper (vertical / horizontal): 7:24 ISO 50 / 7:24 ISO 50 Distance from table center to column surface: 230–530 mm Distance from spindle to table surface: 0–420 mm Distance from vertical front spindle plane to table surface: 150–570 mm Spindle speeds (vertical / horizontal): (12) 60–1750 / (12) 58–1800 rpm Horizontal spindle motor power: 5.5 kW Vertical spindle motor power: 4.5 kW Table feed servodrive: 2.36 kW / 15 Nm Kfodpfeg Nghtjx Aa Esa Machine dimensions: 2550 × 2161 × 2102 mm Weight: 2885 kg Additional Equipment 3-axis digital readout Servodrive Long arbor ISO 50 / 27 mm and ISO 50 / 32 mm ISO 50 / MT4 reducer ISO 50 arbor with ER32 collets: 4, 6, 8, 12, 16, 18, 20, 26 mm Lighting Cooling system Central lubrication system Table feed for X, Y, and Z axes Complete service tool kit EC Declaration of Conformity Operating manual Our UWF 150S SERVO milling machine with a swiveling table is the perfect solution for demanding machining tasks, delivering reliability, precision, and high performance. Discover new possibilities in industry with our advanced technologies and robust construction.

Condition: new, cutting diameter 185 mm saw band length 2.085 x 20 x 0,90 mm table height 920 mm Kfodpfx Aajvn Uzaj Eea band speed 35 + 70 m/min connected load frequency 400 V total power requirement 0,8 kW weight of the machine ca. 200 kg Berg & Schmid - GBS 185 Eco AutoCut Metal Band Saw Extremely fast and smooth sawing thanks to improved drive technology - Miter cuts up to 60° left - Suitable for dry and wet cutting - Coolant system - Machine base

Condition: new, - 2 speeds - Miter - Hydraulically adjustable cutting pressure - Quick clamping clamp - Cooling system - Automatic output - Saw blade 2455 x 0.9 x 27 mm Ksdsrt Rp Hspfx Aa Esfa - Emergency stop - Documentation - 400V

Condition: excellent (used), Year of construction: 2003, cutting diameter 128 mm Kodpfx Aajxbh Hfo Esfa saw band length / mm table height / mm

Condition: as good as new (ex-display), Demonstration machine Extra strong, robust, durable bandsaw mill for logs with a maximum diameter of up to 1000 mm. Includes soft starter, can be extended with extension sections. Automatic feed with infinitely variable speed. Electric height adjustment controlled from the operator panel. Equipped with telescopic log turner, log lifter, log lifter with drive for horizontal log feed. Hydraulic angle stops. Includes 2 log clamping devices. Hydraulic saw blade tensioning. Electrically adjustable saw blade guide. CE certified. Technical data: Ksdovrvq Dspfx Aa Eofa Max. log diameter: 1000 mm Max. board width (slab width): 920 mm Max. saw blade stroke: 900 mm Min. cutting height: 30 mm Max. frame opening: 365 mm Cutting length of base section: 7.5 m Extension section length: 3 m Saw blade drive output at 100% duty cycle: 22 kW Feed motor at 100% duty cycle: 3 kW Lift motor: 0.55 kW Hydraulic unit motor: 5.5 kW Saw blade dimensions: 5960 x 60 x 0.9-1.3 mm Weight of base version: 2800 kg This machine includes the following accessories: CTR-1000H60-Ver3 – 3m extension section (extends the cutting length by 3m). CTR-VOR-1300H – Pre-cutting device (for maximum saw blade service life). CTR-AMP – Ammeter (shows the current consumption). CTR950H-KSD – Chain log turner (for hydraulically turning logs). CTR950H-DS – Double-arm log loader (for hydraulic loading). CTR950H-MR – Material chute (allows the end of the pushed material to slide onto subsequent belt or roller conveyors). CTR1000H40-ZUB – Outfeed conveyor for sawn material (allows for very easy material removal or material can be pushed onto subsequent belt or roller conveyors).

Condition: new, Year of construction: 2025, CORMAK HBS275 band saw, equipped with a hydraulic cylinder, a cooling system and an arm swivelling up to 60º, together with blades from renowned German company Röntgen, is used commonly in ironworking, where precision, quality and cutting speed are essential. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or with any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Carbide guiding drastically reduces the wear of the machine and blades. Machine's arm made of uniform cast iron as well as a 27 mm wide cutting band are capable of low and high quantity cutting of profiles and other materials. The vice is located in an adjustable bed, equipped with a quick clamp. Blade guides have cemented carbide plates and roller bearings. Its these cemented carbide guides that provide cut precision and straightness. The arm, positioned at an angle of 25º, thus increasing blade durability, is equipped with an automatic blade tension sensor. To the bottom of the arm a brush wire is attached, ensuring clean and functional brush. Machine's drive is transmitted through a worm drive. A 3-phase motor with 2 cutting speeds and motor thermal protection. This cutting machine also has a strain gauge - a band tension sensor and an automatic switch-off in case the cutting band breaks. Upper part of the base constitutes a tank for flood coolant draining and chips produced during cutting. A cast iron workbench is attached to the base, with a swivel arm and control panel on separate arm. The main cutting move in the cutting process is moving the cutting band and the arm lowering feed. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 37.5 and 75 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Total power 1.5 kW Power supply 400V 50Hz Arm lowering control hydraulic cylinder Kedpfx Aasudi Unj Ejfa Band dimensions 2455 x 27 x 0.9 mm Band speed 37.5/75 m/min Vice base height 900 mm Weight 215 kg Angle 0º ø220 260 x 140 200 x 200 45º R ø160 160 x 140 160 x 160 60º R ø100 120 x 100 100 x 100

Condition: good (used), - power supply - 230 V - motor power - 0,92 kW, 1,25 HP - rotational speed - 2850 rpm - blade diameter - 250 mm - disc bore diameter - 30 mm - shield for the disc Kfoder A Anqjpfx Aa Eoa - cutting height - approx. 70 mm - cutting width - approx. 440 mm - arm length - approx. 660 mm - arm angle adjustment +/- 90° - blade angle adjustment 0°-90° - arm height adjustment - blade adjustment in vertical axis +/- 90° NO DISCS FOR DISCS

Condition: new, cutting diameter 240 mm dimensions of saw-band 2730 x 27 x 0,9 mm table height 920 mm cutting speed 35 + 70 m/min 240 mm stroke back stop 230 mm cross-slide 270x230 210 Impact energy 200 Air consume per blow 200x210 130 mm 130 mm 130x160 mm total power requirement 1,2 kW weight of the machine ca. 0,26 t dimensions of the machine ca. 0,9 x 1,6 x 1,74 m New, unused display machine! Kjdpfx Aajxpi Aqj Eofa • Left miter 60°

Condition: good (used), Year of construction: 2015, KASTOradial M4 - Cold Circular Saw - CE marking - Complete technical data, see images Dimensions: LxWxH 0.8x0.9x1.7 meters / Weight 200kg Kfedpfjxawpgox Aa Eja Errors and omissions excepted.