Vertical machining center

HAAS Servo Bar 300 "BAR48B" Bar Loader

Condition: new, Electrical voltage 400 V Frequency 50 Hz N° Phases 3 / 3 Ph Mass 486 Kg Dimensions sheet 2700 x 27 x 0.9 Rjdpfed R Uz Tsx Aa Eel

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 2,134 mm, travel distance Y-axis: 1,016 mm, travel distance Z-axis: 762 mm, controller model: HASS, table width: 914 mm, table length: 2,134 mm, table load: 1,800 kg, overall weight: 11,340 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 7,500 rpm, coolant supply: 15 bar, distance table center to spindle nose: 864 mm, spindle motor power: 22 W, spindle nose: ISO 40, number of slots in tool magazine: 40, tool length: 406 mm, tool diameter: 63 mm, tool weight: 5,500 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED ​​vertical machining center with HAAS CNC Redpfx Aaowrfamj Ejl

Condition: used, X Axis 30.0 in 762 mm Y Axis 16.0 in 406 mm Z Axis 16.0 in 406 mm Read for inspect Ready for delivery Rsdpfoiypzdjx Aa Eel

Condition: ready for operation (used), controller model: Haas, empty load weight: 12,000 kg, total length: 5,950 mm, total width: 3,048 mm, total height: 2,200 mm, swing diameter over cross slide: 2,000 mm, Grote doorlaat toolroom draaibank Draaibank met dubbele klauwplaat Spanenafvoerband CNC Hollow Spindle Slant Bed Oil Country Lathe Swing over bed: 1350 mm Swing over cross-slide: 400 mm Dia of spindle bore: 270 mm!! Power on the spindle: 55 HP Rjdpewu Ipijfx Aa Eol Number of speeds: 1 > 500 rpm

Condition: used, Year of construction: 2005, functionality: fully functional, travel distance Z-axis: 1,219 mm, rotational speed (max.): 2,000 rpm, travel distance cross slide: 203 mm, Flatbed Lathe Manufacturer: Haas Rjdewftdmepfx Aa Esl Type: TL-2 S/N: XXXXX Year of Manufacture: 08-2005 On-time hours: n/a Control: Haas CNC Technical Parameters: ----- - 4-way tool post with Parat quick change system - Z travel: 1,219 mm - X travel: 203 mm - Swing over bed: 406 mm - Swing over slide: 282 mm - Spindle bore: 76 mm - Spindle speeds: 10 - 2,000 rpm - Coolant system - Tailstock / MT 4 - Weight: 2,100 kg Accessories: ----- - 3 Parat cartridges - 3-jaw chuck - Documentation

Condition: used, Year of construction: 2023, load capacity: 5,000 kg, lifting height: 3,770 mm, total length: 5,930 mm, Diesel forklift Linde H 50D-01/600 Drive Diesel Year built 2023 Lifting height (mm) 3,770 Lifting weight (kg) 5,000 Redpfexd El Rox Aa Esl

Condition: new, Year of construction: 2025, table length 1000 mm table width 2000 mm table height 200 mm weight 650 kg Manufacturer: GERD WOLFF Technical Details: • Length 2000 mm • Width 1000 mm • Height 200 mm • Weight 650 kg • Hole diameter 28 mm Rsdjuia Najpfx Aa Eel • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 4 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 • 2400 x 1200 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Condition: new, Year of construction: 2024, Manual band saw machine for cuts from 0° to 60° right. Hydraulic belt tension, loop handle with control button. Combination belt guide with lateral bearings. Carbide cutting tips and an upper bearing. Manual pruning or pruning option without the user, with the weight of the bracket and controlled by hydraulic brakes; then the bracket is raised again manually to the desired position. Manual clamp for quick and precise blocking of the part. Rotation of the bracket from 0° to 60° to the right with locks, precise measurement of the angle, manual vice with quick-release lever. Millimetric degree scale rod. Coolant tank integrated on the upper side of the base frame with a discharge nozzle and electric coolant pump for cooling on both sides of the saw blade guides. Control voltage 24 VAC, main switch and control. Maximum current protection and short circuit. Connection voltage: 400V/50Hz/3Ph standard. Machine colour: yellow RAL 1018 and gray RAL 7036. It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us. Redpegculvsfx Aa Esl

Condition: like new (used), Year of construction: 2017, workpiece weight (max.): 3,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, workpiece height (max.): 510 mm, workpiece width (max.): 1,250 mm, workpiece length (max.): 975 mm, empty load weight: 4,200 kg, Equipment: cooling unit, Fanuc Robocut C800iB - Model Year 2017 Fanuc's largest wire EDM machine AWF Automatic Wire Threading Turkish Control Unit - Touchscreen Fanuc Link i Remote Control Water Cooler Core Joint Part Holding Twin Servo Wire Tension Control Thermal Compensation Fanuc New Series 15" Touchscreen and Turkish Control Unit Able to make 5 cuts with the standard new power supply and achieve a surface quality of 0.30 microns. New lower head design and lower head tube protected by bellows. Twin Servo wire tension control ensures consistently stable wire tension during cutting, resulting in more precise cuts. Advanced AWF2 system allows for wire threading at the point of breakage. Rsdpfx Aexfaqkoa Eel Program transfer and remote control via CF card, USB, RS232C, and Ethernet Standard Features Maximum throughput workpiece clamping (mm): 1250 x 975 x 500 mm Maximum workpiece weight (kg): 3000 kg X-Y axis travel (mm): 800 x 600 mm Z axis travel (mm): 510 mm U-V axis travel (mm): 200 x 200 mm Maximum cutting angle (°/mm) std. Maximum cutting angle (°/mm) opt.: ±30° / 150 mm : ±45° / 70 mm Minimum axis travel (mm): 0.0001 Wire diameter (mm): Ø 0.1 ~ Ø 0.30 Maximum wire weight (kg): 16 kg Footage (mm): 2900 × 3260 mm Machine weight (KG): 4200 kg Control unit: FANUC

Condition: excellent (used), Year of construction: 2003, DMG DMU50 Evolution, 5-axis simultan Year: 2003 x-travel 500 mm y-travel 420 mm z-travel 380 mm control iTNC 530 Heidenhain Redpfxewmm Eys Aa Ejl spindle speeds 20 - 12000 U/min tool taper SK 40 DIN 69871 A Feed speed 20.000 mm/min rapid traverse X-axis 50 m/min rapid traverse Y-axis 50 m/min rapid traverse Z-axis 50 m/min tools in tool magazin 24 (2x12) max. tool length 200 mm max. tool weight 6 kg max. tool diameter 50 mm table surface area 500 x 380 mm center bore 30 H6 T-slot - distance 63 - 14H7 mm swivelling range 0° / +180° (B-Achse) swivelling range 360° / 0,001° (C-Achse) max. table load 200 kg Rapids C - Axes 33 min -1 rapid traverse B-axis 26 min -1 total power requirement 38 kVA weight of the machine ca. 6,0 t Accessories/options: Through spindle coolant Swarf conveyor Documentations Visiport window system Vice Tool holders Under power in our warehouse, ready for inspection.