Carpentry machine

Graule 200 NF

Condition: new, Year of construction: 2026, Crosscut and Mitre Circular Saws Type ZS 200NF Crosscut and mitre circular saw with a maximum cutting height of 200 mm Robust grey cast iron construction Precise ball bushing guidance of the tool carriage on hardened and ground steel shafts Manual saw feed Quick mitre adjustment up to 65° horizontally and 60° vertically Bdedpew Hl Aqefx Abfsi Adjustable fixed stops Lower saw blade guard connectable to extraction system Machine mounted on mobile machine base with 1.5 m long roller conveyors on both sides (left and right) Left side equipped with scale and stop slider Technical Data Motor 400 V / 5.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Mitre range horizontal 45°- 90°- 25° Mitre range vertical 60°- 90°- 30° Saw blade Ø 520 mm (not included as standard) Extraction port 100 mm Weight 490 kg Location: In stock at 54634 Bitburg - Immediately available - On request, we are happy to offer the saw blade as well.

Condition: good (used), Year of construction: 2017, working width: 310 mm, power: 32 kW (43.51 HP), Cross Profiling Machine / End Profiling Manufacturer: Marinus Model: Powermax Endmatcher 300 Year of manufacture: 2017 Well-maintained machine, sourced from a parquet manufacturing facility The Powermax Endmatcher is designed for end processing (tongue and groove machining) of floorboards, decking boards, and cladding profiles in a through-feed operation. Workpiece width: approx. 60 – 310 mm Workpiece length: min. approx. 450 mm Workpiece thickness: approx. 10 – 45 mm Bdodpfjy H U Upsx Abfsi Control via touch panel at the machine infeed Air pressure: 6 bar Power supply: 400 VAC / 50 Hz Total connected load: 32 kW Dimensions: approx. 3000 x 1800 x 2000 mm (L x W x H) Weight: approx. 3500 kg Some information taken from the manufacturer's brochure.

Condition: new, Year of construction: 2026, Product Details Crosscut and miter saws Type ZS 200NF Crosscut and miter saw with a maximum cutting height of 200 mm Stable gray cast iron construction Precise ball bearing guide for the tool carriage on hardened and ground steel shafts Manual saw feed Quick miter adjustment up to 65° horizontally and 60° vertically Adjustable fixed stops Lower saw blade guard can be connected to an extraction system Machine mounted on a mobile machine base with 1.5 m long roller conveyors on the left and right Left side with scale and stop slide Technical data Motor 400 V / 5.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Miter range horizontal 45° - 90° - 25° Miter range vertical 60° - 90° - 30° Saw blade diameter 520 mm (not included as standard) Extraction port 100 mm Weight 490 kg Location: Available from stock in 54634 Bitburg Bjdpfx Abecnz Rvsfjdi - Immediately available - Upon request, we will also be happy to offer you the saw blade.

Condition: new, Year of construction: 2026, functionality: fully functional, 7.5 hp 200 mm cutting height 1 hydraulic feed brake Tilts to the left up to 60°, to the right up to 30°, can be tilted from the front using a hand crank Bdodpsb Dkyvjfx Abfei When tilted at 45°, the cutting height is 140 mm Swivels to the left up to 60°, to the right up to 45° Cutting length at 90° - 420 mm Cutting length at 45° - 295 mm Length of the outfeed roller conveyor with scale and stop guide on the left - 6000 mm Length of the infeed roller conveyor 2000 mm, mounting side on the right Machine is fully mobile, overall length 9000 mm Can be tilted from the front with a hand crank; the machine is also available with a 215 mm or 240 mm cutting height and other options.

Condition: used, functionality: fully functional, machine/vehicle number: M5608*10687, Year of construction: 2001, operating hours: 35,000 h, load capacity: 13,600 kg, lifting height: 5,250 mm, free lift: 1,750 mm, fuel type: diesel, mast type: triplex, construction height: 3,200 mm, fork length: 2,400 mm, empty load weight: 19,321 kg, total length: 5,455 mm, drive type: Diesel, construction width: 2,550 mm, Heavy-duty forklift - Diesel Chassis number: M5608*10687 Load center: 600 Mast type: Triplex Bdedpfx Absyldxmjfoi Transmission: Clark 13.7HR32334-104 Condition: Ready for operation and fully functional Technical condition: good Front tire type: Pneumatic Front tire size: 12.00-20 Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 12.00-20 Rear tire condition: 40 - 60% Side shifter, fork positioner, Full cab, twin tires,

Condition: new, Year of construction: 2026, Mobile chop station with extremely robust base, ready assembled and ready for use. Bdjdjb Nrg Uepfx Abfei Included special equipment: - Machine tiltable on both sides from the front - Circular saw blade HM 520x50 Z60 W neg. - Undercarriage mobile, especially stable Data of the machine: - especially due to constant zero point good when using measuring equipment and stop systems (miter and tilt!) - Powerful three-phase motor 5 kW with automatic Star-delta starting - stable guide arm with 4 ball bushings for precise and safe preference - swiveling left 45 ° (miter) - swiveling right 65 ° (miter) - Tilt left 60 °, right 30 ° - Cutting width at 90 ° 420 mm - Cutting width for miter 45 ° 295 mm - Cutting height vertical 200 mm - Cutting height at inclination 45 ° 140 mm - Cutting height at inclination 60 ° 80 mm - for saw blade 520x50 mm - Suction nozzle 100 mm - Weight with stand 300 kg - CE and GS signs. dust tested - German quality product Data base: Extremely stable frame construction from large dimensioned profiles, powder-coated, sturdy steel carrying rollers with ball bearing high wall thickness galv. galvanized, sustainable Double-stop swivel castors with PU tread, easy to move Roll width 450 mm Conditions about threaded spindles adjustable 1500 mm roller conveyor per side 2750 mm stop length per side Total length 5990 mm Stiff profile heavily ribbed 100x50 mm Anodised aluminum (extendable as option) 1 hinged stop right and left Measuring tape right and left

Condition: new, Year of construction: 2026, Miter saw and cut-off saw, type: ZS 200 N - 5 KW motor with machine stand, but without saw blade Machine operated via handwheel and worm gear (rear) Tilting Saw blade diameter: 520 mm, saw blade arbor bore: 50 mm Saw blade speed: 2800 rpm 400 volts / 5 KW (S6/40%) motor with brake and automatic star-delta motor switching Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: when tilted: 295 mm Cutting height at 90 degrees: 200 mm Bodpsi Dfidsfx Abfjdi Cutting height at 45 degrees when tilted: 140 mm The saw can be tilted to an acute angle of approximately 25 degrees on one side and tilted flat to the left up to 30 degrees. Machine weight: approx. 250 kg Location: Available from stock in 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, functionality: fully functional, space requirement width: 3,200 mm, space requirement length: 1,200 mm, space requirement height: 2,100 mm, overall weight: 170 kg, total width: 3,200 mm, total length: 1,700 mm, inner dimension width: 1,500 mm, HEAVY-DUTY Drying Rack / Cantilever Rack – for the most demanding applications The most important facts at a glance: 1. Ball-bearing slide for width adjustment from 1.70 to 3.00 m span. Bodpfx Absfiuhvjfsdi 2. Space-saving, as they can be nested inside each other. 3. Large gap of 135 mm for easy loading, even with a fast work pace. 4. Vertically standing, square-profile beam, for minimal contact area. 5. High usable depth of 1,000 mm. 6. High load capacity of 1,000 kg. 7. Very good rollers that make it easy to move the racks, even when loaded. Simply high quality, "made in Denmark". The racks are usually available for immediate delivery from stock. To save on shipping costs for our customers, we pack the racks pre-assembled (see image). Assembly is very quick. Do you have any questions? Contact us, we will be happy to help!

Condition: new, A dedicated machine for producing a straight trench / notch in a variety of timber products used in general joinery, garden furniture, shed, roof truss and timber frame manufacturing. Also can be used for door framing, notching of roof bearers and for log cabin manufacture.As standard the machine is fitted with horizontal pneumatic workpiece clamps and also a hydrocheck damper control to give a smooth stroke action to the cutterhead movement. Precision ball bearing movement on hardened steel runners. Sturdy cast iron construction with steel base stand. 3kw motor. Max tool dia 250mm Bore of tool 40mm. Handwheel rise and fall of cutter motor arm. Max depth of trench / notch 60mm. Bedpfx Ajdy Hm Dobfjdi Width of trench / notch 60mm - in one pass. Max. length of travel of tool 250mm. 2 x horizontal workpiece clamps. Hydrocheck damper to movement of cross cut arm. Dust extraction outlet 100mm. Machine stand

Condition: like new (used), Year of construction: 2024, Used double-sided cantilever racking: hot-dip galvanized bolted system Scope of supply: 4 double-sided racking uprights, height 4,160 mm with base section 1,200 mm 24 cantilever arms with 1,200 mm depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height-adjustable in 100 mm increments - Per upright, 6 screwable cantilever arms and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels on top of each other per upright side - Including longitudinal and diagonal bracing for 1,300 mm distance - Racking length 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany Bdedpjh Ek Daofx Abfei - Short delivery time - On-site collection possible Our cantilever racking is produced exclusively in Germany. We offer reliable freight services with prior notification before delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The subsoil must be made of concrete, level and suitable for dowels, and must be able to absorb the acting loads. The customer must check and ensure the ground conditions, load-bearing capacity, and any required official permits. The racking uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational health and safety association, it is recommended that the racking uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.