Gernep Labetta 4/3/12 784 2A SD Cold Glue Labeler (2019)

Gernep Kaltleim / Nassleimetikettierer

Condition: used, Year of construction: 2012, Overview This Gernep Labetta 4/3/8 480 2A is a rotary cold glue labeller for glass bottles, built in 2012 by Gernep (Barbing, Germany). It was in service at a craft brewery and applies body, neck-ring and back labels at up to 9,000 bottles per hour. The machine ran on one format, a 0.30 L BNR beer bottle, and is supplied complete with format parts, a large stock of spare parts and the glue pump units. Technical data - Manufacturer: Gernep (Barbing, Germany) - Model: Labetta 4/3/8 480 2A - Year of manufacture: 2012 - Machine type: rotary cold glue (wet glue) labeller for glass bottles - Output: up to 9,000 bottles/h Iiodpfx Aez I Rt Ejfush - Labelling stations: 2 - station 1 body label and neck-ring label, station 2 back label - Bottle format: 0.30 L BNR beer bottle (glass) - Direction of operation: left - Control: Siemens S7 Equipment - Two wet glue labelling stations for body, neck-ring and back labels - Format parts for the 0.30 L BNR bottle - Large stock of spare parts - Glue pump units - Complete technical documentation: operating manuals, spare parts lists, component manuals, electrical and mechanical drawings Condition Taken out of service in working condition in May 2026 and stored since. Regularly maintained by Gernep; major Gernep service in March 2025 with new bearings and wear parts. Everything required to put the machine back into operation is included. The machine can be moved by forklift or pallet truck. Inspection is possible by arrangement, and the former operators are available for questions. Availability Immediately available. Location: Netherlands.

Condition: excellent (used), Complete line direct from Bankrupt company which was filling capsules and tablets into small tubs. Bottlea are loaded into the line from lazy susan, product is counted and doses into the tub or bottle which is then foil sealed before the screw lid is applied. All machines were bought new in 2015 and appear to be in excellent condition. The counter is a Vitacount 12-1 Iijdpfxjw Hz T Es Afueh

Condition: used, Year of construction: 2020, Overview  This labelling machine was manufactured in 2020 by Gernep. The machine is designed for labelling applications in the juice industry. The machine is currently still installed and under power and can be visited on request. Technical data - Capacity: 10,000 bph - Application: Juice - Configuration: Gernep Labetta 4/3/10 640 2A - Labelling technology: Cold glue / Rollina - Labelling stations: 2 × cold glue aggregates - Bottle Formats - Container type: Glass bottles (fruit juice) Iisdpfxezazkvj Afujh - Typical formats: - 1.0 L VDF (H=307 mm, Ø90 mm) - 0.5 L NRW (H=260 mm, Ø68 mm) - Special capability: - Suitable for hot-fill applications - Label Data - 1st cold glue station: - Label length: approx. 25 – 140 mm - Label height: max. 150 mm - Lower edge: max. 15 mm - Upper edge: max. 320 mm - 2nd cold glue station (incl. wrap capability): - Label length: approx. 25 – 140 mm - Up to 170° wrap-around of bottle circumference - Label height: max. 150 mm - Lower edge: max. 15 mm - Upper edge: max. 220 mm - Applications: - Body label - Front (chest) label - Back label

Condition: used, Year of construction: 2008, Overview  This cold glue labeller was manufactured in 2008 by the German company Gernep. The machine is designed for applying labels using cold glue technology and is immediately available for sale. Technical data  - Manufacturer: Gernep - Model: Labetta 4/3/10 640 2A - Year: 2008 - Direction of rotation: Left-hand machine (bottle plate rotates counterclockwise) - Nominal capacity: 14,000 bottles/hour - Adjustable from 3,000 - 15,000 bottles/hour - 2 cold glue units - Label positions: Body, front, back - Bottle formats: - 0.5L NRW bottle - 0.33L Vichy bottle - 0.33L Ale bottle Isdpfx Aewaxyiofusih

Condition: as good as new (ex-display), operating hours: 50 h, Uhlmann thermoform packaging system UPS 4 ETX for processing PVC forming film and aluminum lidding film Basic machine in modular technology and balcony construction, with 12 modules: - Molding film holder with 2 pneumatic clamping shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and gluing table for shaped film - Shaped film unwinding, clocked - 3-zone contact heating: - 6 heating circuits, individually adjustable - Simultaneous heating of min. 3 feeds - Heating plates during machine stop automatic opening - Forming station with 4-column lifting table guide - Filling section, length 1,360 mm - Safety flap on the filling section Cover film unwinding on operating side with pneumatic expansion shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4 columns lifting table guide: - Integrated overload protection - Automatic lifting of the upper sealing sealing tool when the machine stops - Free module for the installation of an additional station Iodpfxstndpze Afujih - Clamping gripper feed - Punching station with blister lowering - Waste cutter with integrated motorized transport of the punching grid - Smoothing device - ET/DT perforating station - Monitoring of the compressed air supply with machine stop when the minimum the minimum value - Visio Scan - Electrically interlocked safety doors - Quick format change due to - plug-in format parts - Plug-in connections for cooling water supply - Main drive with frequency-controlled three-phase motor geared motor - Switch cabinet at the rear of the machine, swivel-mounted Paccontrol operating control - 10.4" TFT color display with 640x480 pixel resolution - Processor 68C030 - OS9 2.9 operating system - 2 MB SRAM, 2 MB Flash, 16 MB DRAM - SRAM card reader - IBM standard membrane keyboard - Centronics interface for external printer - PS2 interface for external keyboard - VGA interface for external monitor - Serial interface for diagnostic purposes - Arcnet interface - 8 serial interfaces for connecting devices Integrated shift register ISR Rejection of individual blister rows, e.g. overheated film in the heating station, products in the sealing station, etc. Machine control: Memory-programmable sequence control in modular design: - B&R - PLC control - Bus system with modules for CPU, inputs, outputs, temperature controller, cam controller, etc. - External program memory Technical data UPS 4 ETX: - Number of cycles: - ET range: min./max. : 15/ 50 T/min. depending on film quality, feed and format design - Format range: min./max. feed in filling area : 64/226 mm min./max. film width : 100/300 mm min./max. punching width : 28/284 mm max. drawing depth : 12 mm - Compressed air: - Inlet pressure: approx. 6 - 8 bar 4 Simtap feeders

Condition: used, Year of construction: 2005, Overview This Labeling Machine was built in 2005 by Gernep. It was in operation in a fruit juice plant in Germany till 01/2022. In this company it was only used in single-shift operation for about 100 days a year, which is why the condition of the machine is still very good. Tech Specs: - Capacity: 6,000 bph at 1L bottles - Number of aggregates: 2 Accessories: Iiedpsl Hxzvefx Afueh - Formats for 1.0 l VdF glass bottles, 0.7 l VdF, 0.2 l glass bottles goiter neck - Various spare parts included

Year of construction: 2012, condition: used, 3 cylindroconical fermentation and storage tanks with frame and cone cooling Additional title: 3 pieces, with frame and cone cooling Total volume: 3000 l Pressure capacity: 3 bar Length: 1860 mm Iiodpfx Asxwy Tpsfueh Width: 1860 mm Height: 3700 mm Material: stainless steel Base construction: standing on feet Features: frame and cone cooling, sampling tap, DN50 connection; panel with valves;

Condition: like new (used), Year of construction: 2016, functionality: fully functional, total height: 11,000 mm, total width: 2,350 mm, total length: 11,395 mm, load capacity per storage section: 35 kg, load capacity: 49,560 kg, For SALE 6 pieces!!! KARDEX Vertical Buffer Module LR35® Machine Type: LR-35-19x400x600x11000 Machine height: 11,000 mm Required installation height: 11,050 mm Machine length: 11,395 mm Machine width: 2350 mm Storage segments: 19 pieces Bin width: 400 mm Bin depth: 600 mm Max. load (calculated per Bin): 35 kg Ijdpfxowqp Npj Afusih Machine surface (without "turntable"): 23.49 m² Machine surface (incl. "turntable"): 26.77 m² Permitted total weight: 59,492 kg Permitted total load: 49,560 kg Empty weight (without Bins): 11,415 kg Speed x-axis: max. 3 m/s Speed y-axis: max. 3 m/s Safety intermediate distance: 60 mm Storage grid 25 mm Permitted ambient temperature in operation: +5° - +40° Permitted relative humidity: 85% Year of Build: 2016 Machinehandel De Leeuw BV is one of the few companies in Europe that trades and has in stock mainly used Kardex Remstar VLM automatic Lift (Shuttle systems) & rotating warehouse systems (paternoster systems). See our website for the current stock. We assemble and/or disassemble these systems in a safe manner with VCA certified technicians and we have been doing this for more than 33 years. We also disassemble other brands such as: Hänel, Electrolux, Bertello, Megamat, Lista, Denocard Machinehandel De Leeuw BV Oordeelsestraat 7–b 5111 PA Baarle-Nassau TheNetherlands Email: info at deleeuw-machinehandel.nl

Condition: like new (used), 4 x stainless steel pressure tanks, insulated, temperature-controlled, with agitator connection Technical data / dimensions Available quantity: 4 Volume: approx. 4325 liters Tank type: Pressure tank Condition: used Suitable for food: yes Design: upright Diameter inside: approx. 1,500 mm External diameter: approx. 1,700 mm Cylindrical height: approx. 2,000 mm Total height: approx. 3,684 mm Weight: approx. 1,400 kg Specific weight of the medium: 1.0 to/m³ Operating pressure: overpressure/underpressure Operating pressure: -1/+6 bar Test pressure: 7.5 bar Wall thickness bottom: approx. 8 mm Wall thickness top: approx. 12 mm Wall thickness jacket / cylinder: approx. 6 mm Ground clearance: approx. 700 mm Iedpfx Ajtv Rm Sofuoih Operating temperature: 150 degrees Celsius Material / composition Material inner jacket: V4A (1.4435) Material double jacket: V2A (1.4301) Feet material: Stainless steel Outer surface: Mirror polished Ra

Condition: used, Year of construction: 1992, Storage cellar consisting of 8 vertical tanks with temperature control. Additional title: coolable stainless steel tanks Iijdpfx Afsvcqthjueh Features: 8 storage tanks (6x approx. 165 hl, 2 x approx. 175 hl), temperature control, paneel, blending apparatus