GEKA 80 Ton Hydraulic Punching Machine

GEKA PUMA80 / E500

Condition: ready for operation (used), Year of construction: 2015, operating hours: 5,792 h, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, table load: 794 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis HAAS VF-3SS vertical machining center was manufactured in 2015. It features a 1,372 × 457 mm table, a maximum load of 794 kg, and a spindle speed of 12,000 rpm. The machine includes a 30+1 side-mount ATC and a rapid traverse of 30.5 m/min. If you are looking to get high-quality milling capabilities, consider the HAAS VF-3SS machine we have for sale. Contact us for more information about this machine. • Electrical: • Voltage: 354 / 488 V • Phase: 3 • Frequency: 50/60 Hz Gijdpfx Aex D I Smji Nou • Full load: 40 A • Largest load: 70 A • Short circuit interrupting capacity: 10,000 A • Short circuit current: 5,000 A RMS symmetrical • Machine hours (from control): • Power on time: 19,635 h • Cycle start time: 8,564 h • Table: • Size: 1,372 × 457 mm • Tool changer: 30+1 side-mount ATC • Control unit: Haas CNC Control

Condition: ready for operation (used), Year of construction: 2020, spindle speed (max.): 3,400 rpm, number of axes: 4, This 4-axis HAAS ST-30Y horizontal turning machine was manufactured in 2020. It features C+Y-axis capability, a 3,400 rpm A2-6 spindle, and a 12-station BMT65 turret. The machine is equipped with an automatic tool presetter, bent-type chip conveyor, and programmable tailstock. Gisdpfeyh Hw Iox Ai Neu The machine can be inspected under power and test cuts are possible upon request. Contact us for further details. • Running hours: 556 h • C+Y-axis • 3,400 rpm A2-6 spindle • 12-station BMT65 turret • Programmable Tailstock Additional equipment • Bent-Type Chip Conveyor • Oil skimmer • Exhaust system • Automatic Tool Presetter (ATP) • WIFI camera • Remote Jog Handle

Condition: used, Gearbox, bevel gear, worm gear -Gearbox: Ratio: i = 1:30 -Shafts: Ø 19 x 50 mm / Ø 28 x 60 mm Godpfx Ast Snwxsi Nsiu -Dimensions: 150/145/H175 mm -Weight: 5.1 kg

Condition: good (used), Year of construction: 1998, machine/vehicle number: 0518018, Offer 24600 Gisdpfxovncfmj Ai Nou Technical data: - suitable for welding steel, aluminum, special metals, Cr Ni, etc. - welding current 450 A 60% ED - 360 A 100% ED - welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - water cooling device FRONIUS - separate wire feed case - intermediate package device - wire feed case 14 linear meters - 4 rollers wire feed continuously adjustable - MIG - MAG hose package water-cooled approx. 4 linear meters - ground cable - pressure reducer - mobile base frame - connection 400 V / 6.6 A / 8.7 kVA - space requirement approx. W 650 x H 900 + 450 x D 1100 mm - weight approx. 200 kg

Condition: used, Year of construction: 2025, total length: 1,300 mm, total height: 1,400 mm, total width: 800 mm, Empty weight: 800 kg Price: On request Gsdpfsxixruex Ai Njiu - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: HB10011N2025006 - Operating hours: 0 - Control: Teach-in - Motor power: 4.0kW - Transport dimensions: 1300mm x 800mm x 1400mm (l x w x h) - Transport weight [kg]: 800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 1300 x 650 x 510mm, Table 1200 x 540mm, Spindle speed 12,000rpm, BT40 spindle taper, Godpfjx Dk Dlsx Ai Noiu Spindle Motor 17kW, FANUC Oi Control, 30 Station ATC, Low Volt light, Through Spindle Coolant

Condition: new, Year of construction: 2025, power: 4 kW (5.44 HP), pressing force: 40 t, table width: 440 mm, table length: 700 mm, punching force: 40 t, drop-through hole in table: 140 mm, ram bore: 35 mm, stroke adjustment: 80 mm, warranty duration: 24 months, Equipment: safety light barrier, An eccentric press is a type of mechanical press driven by force generated through an eccentric mechanism, used in cold forming operations such as punching, cutting, and die forming. With its high production speed and repeatability, it offers an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 40 Ton is designed for stable operation in cold forming applications. Its rigid steel construction frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure provide reliable performance suitable for series production. Key Advantages: - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement with central automatic lubrication - Ready-to-use operation with PLC control + dual-hand/pedal control Giodpfx Aovtx Axsi Nsu Areas of Use: - Cold cutting and punching operations - Cold shearing applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel construction body • Four-sided slideway guide • Spheroidal cast iron connecting rod and gear housings • Crankshaft and transmission shafts made from 4140 alloyed steel • Central system fully automatic grease lubrication • Pneumatic clutch and brake combination • Compliant with CE safety directives • Double solenoid safety valve • Manually adjustable stroke • Finger-hand protection safety system with light curtain • PLC control system • Dual-hand/pedal operation system • Mechanical lock system • Emergency reverse motor function • Compliant with occupational safety regulations • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard for 150–300 tons) • Hydraulic protection system (standard for 200–300 tons) • Spare bolster plate • Decoiler, feeder, and straightener • One set of die made to required specifications • Eight-sided slide guidance ✅ TECHNICAL SPECIFICATIONS (40 TON) Capacity: 40 Ton Throat depth: 220 mm Table–ram distance: 340 mm Distance between uprights: 330 mm Ram adjustment: 60 mm Approx. press width: 1050 mm Approx. press depth: 1280 mm Approx. press height: 2100 mm Front anchorage size: 575 mm Side anchorage size: 740 mm Table hole diameter: Ø150 mm Table size: 440×630 mm Die clamp slot diameter: Ø40 mm Ram size: 290×180 mm Floor-to-table height: 720 mm Stroke adjustment: 10-70 mm Strokes per minute: 55 spm Motor power: 4 kW Motor speed: 1450 rpm Approx. weight: 2100 kg Note: Please notify us if you require any modifications to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sale, commissioning, and aftersales processes are handled by CRONOSSTECH.

Condition: good (used), Mechatronic drive system, gearbox, spur gear, angle gear, worm gear, Movigear -Manufacturer: SEW-Eurodrive, gear type R62 i 6.72 -Speed: 208 rpm at 1400 rpm -Shaft: Ø 30 x 60 mm / Ø 19 x 40 mm -Number: 1x gearbox available -Price per piece -Dimensions: 370/190/H200mm -Weight: 22 kg/piece Gedpfxjt App Dj Ai Noiu

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 210 mm -Type: unfortunately without type designation -Piston rod: Ø 35 mm -Holes: Ø 35 mm / Distance: retracted 540 mm -Dimensions: Ø 110 x 635 mm -Weight: 20.8 kg Gedpfxev Tk Duj Ai Njiu

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-6025-CT2-6022 3kW Specifications - Maximum sheet size: 6050x2500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Maximum load: 3840kg - Nominal power: 3.0kW - Energy requirements: 40.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 - Length: 14580mm - Width: 4300mm - Height: 2350mm - Weight: 16800.0kg Cutting thickness - Carbon steel: Recommended thickness 25.0mm, maximum thickness 30.0mm - Stainless steel: Recommended thickness 16.0mm, maximum thickness 20.0mm - Aluminum: Recommended thickness 12.0mm, maximum thickness 14.0mm - Brass: recommended thickness 10.0mm, maximum thickness 12.0mm Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head movements while maintaining high precision is ensured by Japanese Fuji servo motors. ABLS - automatically replenishes grease in guides. RayTools cutting head with autofocus Optional extra - Otinus Protect to guarantee your peace of mind This product ensures protection for the source of your laser. With this service you will ensure that the continuity of your business is protected. We will secure your business so that you can complete your orders on schedule. Optional extra - Voltage stabilizer Control panel Operation of the fiber laser cutter is run by the control panel, which consists of a screen, mouse and keyboard. The computer runs Windows 10 and CypCut software. All installed software has lifetime licenses. Wireless controller included. Assistance by a specialist We are committed to staying in continuous contact with our customers; therefore, we meet this challenge by offering a time-package of hours to be used for the Otinus Professional Assistance to each machine purchased. Otinus Academy By purchasing this machine you will gain a year's access to online courses that will allow you to effortlessly train a new employee or refresh your knowledge from training! Technical consulting We have specialists who, before the purchase, will select the right machine and accessories based on technical drawings of the parts you plan to make. Godpfsrum I Uex Ai Njiu Price-included 2-day training with machine installation - 1st day (up to 8 hours) – machine commissioning and controller usage training - 2nd day (up to 8 hours) – work under the guidance of our technician – the possibility of programming specific parts that are manufactured at your site Consultation with a specialist - Telephone: 7.30 a.m. to 9 p.m. (Mon-Sat) - time package of 8 hours to be used within 12 months. Online: from 7.30 a.m. to 2.30 p.m. (Mon-Fri) - time package of 8 hours to be used within 12 months. Access to Otinus Academy courses - LibreCad - 12-month access In addition, you will receive - CAD drawing package