Vertical turning lathe

FREMTAS 16FR1.300

Condition: used, Year of construction: 1990, turning diameter 2400 mm faceplate diameter 2200 mm turning height 2100 mm control SIEMENS Sinumerik 850T workpiece weight 17 t Tol measurements 32 Werkzeuge Crossbeam travel: 700mm Crossbeam support Travel from centre of rotation to the right: 700mm Crossbeam support Travel from centre of rotation to the left: 700mm Machine table drive Main drive power: 80kW Number of gearboxes: 2 Step change: 3.84 Speed range of the 1st gear stage: 2-32-139 rpm Speed range of the 2nd gear stage: 9-125-500 rpm Max. Machine table load: 6 tonnes Chjdpjygx D Hefx Ad Iec Feed drive Cross beam support Horizontal feed speed: 0.1 - 8 m/min Cross beam support Vertical feed speed: 0.1 - 8 m/min Cross beam support Rapid traverse speed horizontal/vertical: 8 m/min Cross beam adjustment speed: 425 mm/min Tool system Tool system: 180.1 Cutting force on the turning tool: 30 kN

Condition: used, Technical details: spindle diameter: 120 mm Cedpfx Adsxt El Ae Ijhc x-travel: 1250 mm y-travel: 1250 mm z-travel: 800 mm W-axis (spindle longitudinal): 600 mm Speed of boring spindles: 1- 2000 U/min. spindle taper ISO: 50 table surface area: 1000 x 1000 mm total power requirement: 55 kW weight of the machine ca.: 18 t with CNC HEIDENHAIN TNC 426 autom. toolchnager 40-pockets coolant attachment *

Condition: used, Technical details: grinding diameter: 260 mm grinding length: 1000 mm centre height: 130 mm clamping length: 1000 mm feed:: per Hand headstock adjustment: 280 manuell mm total power requirement: ca. 6,0 kW weight of the machine ca.: 1,5 t dimension machine xH: 2580 x 1750 x 1630 mm Non-circular grinding machine - (crankshaft grinding machine) Used for grinding crankshafts, camshafts, etc. Machine table: - rotatable right/left: 6° each - clamping surface workpiece 1240 x156mm Grinding headstock: - headstock adjustment 150mm to workpiece axis - rotatable right/left 90° in two planes - feed by hand manual 280mm - grinding wheel/grinding wheel = 350x32x127mm Chedpfou Ng Dtsx Ad Isc internal grinding spindle type Fortuna SJ 60 x 250L Workpiece headstock: - speed 25 - 65 - 155 - 400 rpm - rotatable by hand adjustment, +/- 90°. - center height 130mm Equipment: Tailstock equipped with dressing device, quill quick clamp with center point. Machine is available for demonstration. *

Condition: used, Lasko hammer KGK 063 Impact force 630 mkp Stroke max. 630 mm Bear weight 630kp Top pressure - filling pressure 5 bar Chodpeu Eb Niofx Ad Ijc

Condition: excellent (used), Year of construction: 2021, operating hours: 3,000 h, travel distance X-axis: 6,100 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 950 mm, CNC Travelling Column Milling Machine – Fully Retrofitted by REM (2021) Powerful and versatile heavy-duty milling machine, completely modernized by REM specialists in 2021 with state-of-the-art Heidenhain TNC 320 control. Ready for immediate production use. KEY SPECIFICATIONS: • X-axis (transversal travel): 6,000 mm Chjdpfx Adon D N H Tj Isc • Y-axis (vertical head travel): 2,000 mm • Z-axis (axial slide travel): 950 mm • Dual-spindle head | Head rotation: 360° • Spindle speed: 1,000 – 4,000 rpm • Spindle taper: ISO 50 (automatic locking/unlocking) • Head dimensions: 290 × 290 mm • Spindle motor power: 15 kW (DC) • Machine weight: approx. 32 tonnes • CNC Control: Heidenhain TNC 320 WHY BUY FROM REM? ✔ Machine fully inspected and tested in working conditions ✔ Modern CNC retrofit – new electrics, new drives ✔ Documentation and technical support available ✔ Export worldwide | Competitive shipping Ideal for heavy component machining in aerospace, energy, and heavy industry. Contact us today for full technical specifications, photos, and video demonstration.

Year of construction: 1985, condition: reconditioned (used), Technical Details : Wire Dimeter range- 4-12mm Cjdpfx Ash In Thed Iehc Gscxckebw Run out table - 4m Speed -80' m/min. Reconstruction- 2022

Condition: excellent (used), Year of construction: 2009, turning height: 1,280 mm, total height: 5,600 mm, total width: 3,850 mm, total length: 4,260 mm, rotary table diameter: 1,400 mm, workpiece diameter (max.): 1,600 mm, overall weight: 21,500 kg, CNC Vertical lathe Fremtas - 16FR3 MACH-ID 9467 Make: Fremtas Type: 16FR3 Control: FAGOR 8055 TC Year: 2009 Work load 6300 Kg Cross rail adjustment 660 mm Feed rate cross rail 0 - 400 mm/Min Feed rate 0 - 3000 mm/Min Rapid feed 0 - 8000 mm/Min Central lubrication Chip conveyor RAM with Sandvik COROMONT C8 Tooling C8 with double connector Ca 10 units CAPTO Tool system 4 extra heavy duty jaws Max. turning Ø: 1600mm Chodpfoy Htiljx Ad Ioc Table Ø: 1400mm Horizontal movement support:1000mm Speeds / ranges: 1 - 200Rpm Power: 75kW Maximum turning height: 1280mm Vertical movement support: 700mm Length: 4260mm Width: 3850mm Height: 5600mm Weight: 21500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), Year of construction: 2007, operating hours: 500 h, functionality: fully functional, overall weight: 17,000 kg, fuel type: diesel, tank capacity: 4,000 l, color: blue, power: 704 kW (957.17 HP), output current: 1,270 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: AC, nominal power: 704 kW (957.17 HP), nominal power (apparent): 880 kVA, total length: 14,500 mm, total width: 4,500 mm, total height: 3,500 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: MTU, type of cooling: water, Brand: Elbe Type: MT-825 CA Year of manufacture: 2007 Serial number: 10330 Operating hours (read): < 500 Power (kVA): 880 Power (kW): 704 Engine brand: MTU Engine type: 16V2000 Engine power (kW): 720 Fuel: Diesel Alternator brand: Leroy Somer Alternator type: LSA49.1L9 C6 S/4 Voltage: 400 Frequency (Hz): 50 Chjdpfx Asyt Dqled Ijc RPM: 1500 Amperage (A): 1270 Dimensions LxWxH (mm): On request Weight (kg) approx.: 17000 Quantity in stock: 1 Country of origin: Germany Remarks: Complete set ex Standby, available for inspection in our yard Sales conditions: As is/where is, functional take-out

Condition: ready for operation (used), Year of construction: 2014, operating hours: 30,222 h, total height: 3,240 mm, overall weight: 8,880 kg, This 3-axis Hurco VMX 50i was manufactured in 2014, featuring a robust table size of 59 x 26 inches and a maximum spindle speed of 12,000 rpm. It supports a tool capacity of 40 with a rapid tool-to-tool ATC time of 2 seconds. Ideal for precise, heavy-duty machining with a maximum table load of 4,410 lb. If you are looking to get high-quality milling capabilities consider the Hurco VMX 50i machine we have for sale. Contact us for more information. • 30 slot tool magazine • Table Size: 1500 x 660 mm • T-Slots: 6 x 18 mm • Maximum Weight on Table: 2000 kg • Spindle Nose to Table: 101 mm • Maximum Spindle Speed: 12000 rpm • Spindle Power (15 min/Continuous): 15 kW / 11 kW @ 720 rpm • Spindle Torque (15 min/Continuous): 198.9 Nm / 116.7 Nm @ 720 rpm • Tool Type: CAT 40 / Big Plus® • Tool Capacity: 40 • Maximum Tool Diameter: 76 mm • Maximum Tool Length: 300 mm • Maximum Tool Weight: 7 kg • Tool-to-Tool ATC Time: 2 sec Dimensions Chodpfox D E Eqox Ad Isc Machine Depth 5055 mm

Condition: good (used), Year of construction: 1998, Press Force 315.00 t Stroke 500 mm Throat 425 mm Installation Height (Upward Stroke) 1,000 mm Table Surface 1,200 x 815 mm Table Height above Floor 800 mm Ram Surface 1,100 x 700 mm Speed Down 48 mm/s Speed Up 330 mm/s Csdpfxsv Rwu Uj Ad Ishc Working Speed 19 mm/s Oil Volume 1,600 l Power Requirement 82.0 kW Weight 23.00 t Dimensions (WxDxH) 2.4 x 2.8 x 4.0 m For Permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation