Edge banding machine

Format 4 Perfect 710 E-Motion

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Iedpfx Aajvvkfdj Ejik

Condition: ready for operation (used), Technical characteristics pressure 2.2 kg / cm² 18 kW diathermic oil boiler Iodpfxjt N Aute Aa Ejik timed pressing digital display Power and Motors Voltage: 400 V Pluging: Three-phased Power: 20 Kw Overall dimensions Lenght: 3500 mm Width: 1500 mm Weight: 3200 Kg

Year of construction: 2002, condition: ready for operation (used), Max. workpiece height: 280mm, tool cone: HSK 63F, weight: 6.5t, an inspection is possible. Iisdpfx Aen Tpm Hja Eok

Condition: as good as new (ex-display), Year of construction: 2023, Automatic loading and unloading Advanced machining capabilities Ideal for volume production Elevate your door frame lining production with the Centauro Alfa Jamb, a state-of-the-art machine designed for the automatic loading, machining, and unloading of door frame linings and jambs. Combining precision, efficiency, and user-friendly technology, the Centauro Alfa Jamb is the ultimate solution for door frame manufacturing. The powerful CNC router head is capable of performing both vertical and horizontal machining operations. This versatile router head excels in hinge and lock plate recessing or slotting, ensuring each cut is executed with precision and consistency. Additionally, a specialised small router is included for spot drilling hinge screw holes and squaring the corners of hinge recesses, enhancing the accuracy and finish of your products. The Alfa Jamb automates the entire process from loading to unloading, allowing your operators focus on higher-level tasks while the machine handles the repetitive work. Programming is simple thanks to the latest generation TOP12-S color graphic touch screen controller. This user-friendly interface features pre-installed electronic macros, allowing you to quickly set up and adjust machining operations with ease. Iijdpeul Uaajfx Aa Ejk Specification Technical Information X Axis stroke 2800mm Y Axis stroke180mm Z Axis stroke 150mm Suitable for Jamb dimensions of 2400mm x 200mm x 75mm Router / Milling head 3.3kw, ER25, 0 to 18000 rpm Pilot Hole Drilling Head 2.2kw ER 25, 0 to 18000 rpm 3 x pneumatic vertical workpiece clamps, automatically activated through the program 3 x pneumatic horizontal workpiece clamps, automatically activated through the program Top 12-S industrial touch screen control 12" with simple macro programming CE safety perimeter guarding to sides / rear with a front light beam curtain Dust extraction connection 120mm Pneumatic supply 6 Bar Overall Dimensions 9644 x 1844mm Overall weight 2000kg Total load 5.6kw Year - 2023 CE. Condition - As new, only used for showroom demonstrations

Condition: used, Year of construction: 2013, Technical data Machine length: 6060 mm Machine width: 1555 mm Machine height: 2300 mm Weight: 2600 kg Total power input: 21 kW (30 A) Compressed air: 6 bar Iodpfx Aasv Szt Do Esik Air consumption: approx. 350 l/min Extraction: 2820 m³/h (at 28 m/s) Technical features and equipment General functions Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min Double pressure from above for stability of the part Electronic thickness control Frequency converter for feed Automatic lubrication of the feed chain Automatic motor calibration Touch control system Emulsion spray at the inlet and outlet Edge preheating Pre-milling unit Tool diameter: 100 mm Tool height: 63 mm Diamond tool with replaceable knives Motorized removal adjustment Gluing unit Glue and hot air application Heated application roller Quick exchange of the entire unit Automatic position adjustment via motor 3 pressure rollers Edging speed: 14 m/min Cutting unit Twin-motor unit with automatic tilting Tilt up to 15° THK prismatic guide Radius milling unit 2 tools Automatic adjustment in two axes Automatic overlap adjustment Copying unit (2 motors) Automatic tool position change by servo motor Electromagnetic horizontal movement Vertical hydraulically damped movement

Condition: used, Year of construction: 2002, Machine length: 6240 mm Weight: 2400 kg Power consumption: 14 kW Extraction diameter: 120 / 140 mm Storage location: Nattheim Iijdpovvkfwofx Aa Eek

Condition: good (used), Year of construction: 2003, functionality: fully functional, Length of sliding table: 3,000 mm Iijdpfx Aaox Dax Es Eok Cutting width at rip fence: 1,000 mm Cutting height with blade diameter 450 mm: 75 - 150 mm Cutting height with blade diameter 350 mm: max. 100 mm (each at 90-degree blade position) Double carriage on steel round guides, no Pertinax Reinforced main saw motor: 7.5 kW Maximum saw blade diameter: 450 mm Height adjustment of the saw unit via dimension input on the control panel Motorized tilt adjustment of the saw unit via dimension input on the control panel Supplied with newly installed 350 mm saw blade 2-axis scoring saw unit, can be set in the control system to desired height and alignment relative to the main saw blade Scoring unit automatically lowers below table level when not in use Adjustment of the scorer can be done while the machine is running RAPIDO scoring saw blade – simplifies scoring width adjustment, set up in max. 3 minutes Adjustment range: 2.8 – 3.8 mm Additional accessories: - Mitre fence extendable to 3,200 mm, with 2 foldable stops - LASER cutting line indicator, e.g. for trimming cuts on solid wood planks

Condition: used, Year of construction: 2011, total length: 4,000 mm, total height: 1,600 mm, total width: 970 mm, Weight: 1.300 kg Price: On request - Year: 2011 Ijdpfewnickox Aa Ejik - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AH/115214 - Number of units [pcs]: 6 - └ 1st unit type: Pre-milling unit - └ 2nd unit type: Glue unit - └ 3rd unit type: Cap unit - └ 4th unit type: Rough milling unit - └ 5th unit type: Radius scraping unit - └ 6th unit type: Flat scraping unit - Max. edge band thickness [mm]: 6 - Max. panel thickness [mm]: 60 - Min. panel length [mm]: 140 - Max. feed speed [m/min]: 11 - Voltage [V]: 400 - Current consumption [A]: 23 - Transport dimensions: 4000mm x 975mm x 1600mm (l x w x h) - Transport weight [kg]: 1300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Specifications and technical data: Base machine 1057 XL C with Beckhoff touch-screen control Extendable workpiece support 600 mm Extension for extendable outrigger Standard infeed fence 3 LED lights in the infeed area Jointing unit with two motors DIA jointing cutter 70 x 64 x 30 mm Z2+2, left and right rotation Edge feeding system 1903, fully automatic GluJet 301 adhesive application system Automatic reloading function Magazine for 1.4 kg adhesive cartridges (holds 4 cartridges) GluJet collection container Pressure unit 1912-3, pneumatic Spray device GM 201 after pressure unit End trimming unit 1918, pneumatic Extraction hoods for end trimming unit Combined trimming unit FR201 with DIA cutters R=2 mm Contour trimming unit 1832 Shelf program Radius scraper ZK 301 Chip collection box Flat scraper FK 701 Iodpfx Aaew I U Rfs Eeik Spray device front and rear TR201 Buffing unit 1940 Availability: short-term Location: Flörsheim

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, input voltage: 380 V, extraction connection diameter: 120 mm, saw blade bore: 30 mm, cutting depth: 110 mm, main saw diameter: 400 mm, extraction nozzle diameter: 120 mm, length stop: 3,200 mm, working width: 1,100 mm, Equipment: motor brake, Format 4 x motion in excellent condition, always worked on by 1 person Iiedpfx Aajv Aywpe Esk