Milling machine accessory

FORKARDT F 200

Condition: used, diameter 200 mm height 150 mm Pedpfx Aoxwzd Aja Ejha hollow 55 mm weight of the machine ca. 30 Kg dimensions 0,2 x 0,2 x 0,2 m 3-jaw chuck with 1 sets of drill jaws Short taper mount size 6 (131,4mm bolt circle) Bayonet lock Chuck wrench

Condition: good (used), HURON MU4 milling machine Table surface 1450 x 460 5 x 16 mm T-slots Longitudinal travel 1300 mm Transverse travel 700 mm Pjdpfeu Hifzjx Aa Eoha Vertical travel 500 mm SA40 spindle 27 spindle speeds 30 to 2,066 rpm Rapid traverse 2,800 mm/min Weight capacity 1500kg Max. head clearance 530 Spindle motor 8.8 Kw Feed motor 3.5 HP Cooling by electro-pump 1.6 HP Overall dimensions: L x W x H 2,000 x 2,000 Approximate weight 4 Tons

Condition: used, Technical details: Phedpjvy D T Aofx Aa Eja diameter: 200 mm passage: 52 mm width: 140 mm Torque: 160 Nm revolution per minute: 3000 U/min weight of the machine approx.: 112 (mit Kiste) kg Flange mounting Ø 185 mm; size Ø 200 x 25 mm, pitch circle Ø 132 mm, bolt size Ø 21mm x / M12, through-hole Ø 105mm conical Jaw connection FBG 200 Clamping range of the jaws max. Ø 200mm with chuck key incl. 26 sets of spare jaws *

Year of construction: 1997, condition: good (used), Build in 1997, 55 KW, 4 bar Phsdpeg A Hcuefx Aa Eea

Condition: good (used), Year of construction: 2004, machine/vehicle number: A II 151768, Offer 25979 - Operating hours 16550 h - Operating pressure 10 bar - Delivery rate 15.9 l/s - Drive 400 V / 7.5 kW - Motor speed 3000 rpm Phsdpfowrcq Nsx Aa Eja - Air tank 250 L - Required space approx. W 700 x H 1830 x D 1050 mm - Weight approx. 250 kg

Year of construction: 2010, condition: excellent (used), Kaeser SM 9 - 11 bar screw compressor Manufacturer: Kaeser Type: SM 9 Machine type: Compressed air screw compressor Year of manufacture: 2010 Condition: Used screw compressor, ready for use Max. Operating overpressure: 11,0 bar Delivery volume: 0,75 m³/min Nominal motor power: 5,5 kW Compressed air connection: G 3/4 Electrical connection: 400V / 3Ph / 50Hz Dimensions WxDxH: approx. 630mm x 800 mm x 900 mm Phsdpjhy Tzyofx Aa Eea Sound pressure level: 64 dB(A) Location: Ex stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 1980, Table size 1300 x 355 mm Tool holder, vertical + horizontal ISO 50 Travel X-axis 1000 mm Y-axis 350 mm Z-axis 450 mm Vertical milling head, swiveling R + L Quill stroke 100 mm Speed range 22.4 – 1400 rpm Psdpsvu Dv Tefx Aa Eoha Feed range 6.3 – 630 mm/min Rapid traverse 2.5 m/min Drive power approx. 5 kW Space requirement L x W x H 1900 x 1800 x 2100 mm Weight 3200 kg Accessories / Special features: • 3-axis digital display, make FAGOR • Swiveling vertical milling head (R-L) with quill adjustment 100 mm • Vertical and horizontal milling spindle ISO 50 • Milling spindle vertical + horizontal • Large Clamping table 1350 x 350 mm • Feed and rapid traverse in all axes • Wide, stable guideways • Central lubrication • Swiveling control panel • Coolant system • EMERGENCY STOP switch Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Year of construction: 1988, condition: used, centre height 140 mm chucking diameter 250 mm Pedpfxsipyx Ts Aa Esha swivelling range 90 Grad weight of the machine ca. 150 kg Dividing head swivable of a Heckert FU 400

Condition: used, Universal tool milling machine Brand: OPTIMUM Model: MT 100 Year of manufacture: 2018 – workshop tested Machine no.: J33021808035 Geometric acceptance with test report Phedpfxjw Rlvqj Aa Eea Accessories: - 3-axis digital display DPA 2000 - Vertical milling head SK 40 with drawbar thread M 16 - Fixed table 1,120 x 260 mm (T-slot: 14 mm) - Machine lamp - Coolant system - Manual central lubrication - Operating manual Used as seen, without warranty The machine technically corresponds to the state of the art at the time of manufacture.

Condition: used, Milling Machine Brand: HURON Type: NU5 X-axis (longitudinal) 1300 mm Y-axis (transverse) 700 mm Z-axis (vertical) 500 mm Table length 1635 mm Table width 460 mm SA 40 spindle taper Phedpfx Aowiuykja Eja Max. spindle speed: 2066 rpm Spindle motor capacity: 8.9 kW Dimensions (L x W x H) 1700 x 2200 x 1700 Weight: 3200 kg