Drilling Machine

FLOTT SB 25 Plus R2

Condition: good (used), Year of construction: 1988, machine/vehicle number: 251500126, Offer 24156 Technical data: - Drilling capacity in steel ST 60 18 mm - Drill spindle mount MK 2 - Drill spindle stroke 100 mm - Drill spindle speeds approx. 340 - 2400 rpm Ksdpfx Ajvxhdcsklonb - Right and left rotation - Projection 250 mm - Max. distance table - drill spindle 670 mm - Table with 2 T-slots 320 x 280 mm - Height adjustable via rack with hand crank - Drive 400 V / 0.75 kW - Space requirement approx. W 500 x H 1750 x D 750 mm - Weight approx. 180 kg - with: - Keyless drill chuck

Condition: used, Drill and tapping machine FLOTT, type TBZ 15 GL Serial No. 32177027 Year of manufacture 1986 Drilling capacity 15 mm Spindle mount MK2 Overhang 195 mm Quill stroke 80 mm Table size 275 x 200 mm Column diameter 70 mm Knjdpfxsdzp S Ne Aklob Spindle speed 80 - 4500 rpm, 18 steps Motor power 0.55 + 0.75 kW Power connection 380 Volt, 50 Hz - Drilling spindle speed controlled via 2 motor speeds, 6 belt steps from the motor and 2 belt steps to the drilling spindle - Drilling head height adjustment via hand crank with rack and pinion on the column - Tapping attachment with guide chuck and switchover for right-hand and left-hand threads - 3 guide chucks for right-hand threads 0.7mm + 0.8mm and 28G available - Tapping possible with and without guide chuck - 1 toothed chuck for drill bits Ø 1.5 to 13 mm - Foot switch for cycle start - Emergency stop - Original metal base Space required L x W x H 700 x 350 x 1850 mm Weight 165 kg Good condition

Condition: ready for operation (used), A used, but well-maintained SB 25 pillar drill is for sale, as shown in the pictures. Kodpsit Rfbsfx Aklsnb

Condition: new, 40 mm M 24 M 30 spindle turning speed - stepless 160-2250 U/min MK 3 spindle stroke 120 mm throat 293 mm column diameter 115 mm 515x360 mm distance spindle /table min./max. 117/701 mm Kjdpfoyvvq Djx Aklonb 2 x 14 x 224 mm feed 0,1 + 0,2 mm/U Machine height 1840 mm

Condition: good (used), Type: SSB 3 A Kjdpfx Aksxlqxfslonb Machine No.: 5607 Year of manufacture: 1973 Equipment: - MK3 quill - Machine lamp - Quick-action drill chuck incl. morse taper arbor, clamping range 3-16 mm - Infinitely variable speeds Range 1: 0-900 rpm Range 2: 0-1700 rpm - Thread cutting device Condition: good, workshop-tested, speed variator with new bearings

Year of construction: 1995, condition: good (used), Offer 22054 Technical data: - Drilling capacity - in steel: 15 mm - Drilling capacity - in aluminum: 18 mm - Drill spindle mount: MK 2 - Drilling depth: 70 mm - Spindle overhang / column: 180 mm - Drill spindle speeds: 80 - 4000 rpm - Drive: 400 V, 0.45 / 0.75 kW Kjdpfxskt N Nle Akljnb - Height-adjustable drilling table: 280 x 240 mm - Distance drill spindle / table: approx. 360 mm - Distance drill spindle / base plate: approx. 410 mm - Space required: approx. W 280 x H 1700 x D 600 mm - Weight: approx. 85 kg - Includes: - Quick-change drill chuck 1 - 13 mm - Machine vise - Assorted used HSS drill bits 5 - 15 mm

Condition: new, :VL 1100A x-travel:1100 mm y-travel:600 mm z-travel:600 mm table-size:1280x600 mm max. table load:1000 kg distance spindle center to column:630 mm distance spindle center to table:100-700 mm rapid traverse in x-y-z axis:36/36/30 m milling feed range:1-10.000 mm/min :10.000 1/min (direkt) spindle drive:11/20,4 kW positioning accuracy:+/- 0,010 mm repeating accuracy:+/- 0,008 mm tool taper:40 BT max. tool diameter:80/130 mm max. tool weight:8 kg max. tool length:300 mm dimensions:4.920x3.510x2.850 mm weight of the machine ca.:7,25 t Brand-new CNC vertical machining center with CNC control Siemens 828D with Shopmill. Incl. the following standard accessories: CNC control Siemens 828D with SHOPMILL including 2-year warranty 1 piece coolant system 1 piece automatic 20-fold tool changer (Model VL-700), Type ?ARM TYPE ATC? 1 piece automatic 24-fold tool changer (Model VL-900, VL-1100, VB-1000, VB-1200, VB-1600), Type ?ARM TYPE ATC? 1 piece Halogen Machine Lamp 1 piece alarm / indicator lamp rigid tapping 1 set of tools 1 piece chip conveyor (chain) 1 piece tool set (water gun, air gun) 1 set foundation blocks and fixture screws heat exchanger for electric cabinet automatic lubrication system full enclosure guard automatic power off Spindle speed of 8000 U / min (Model VL-700, VL-900, VL-1100, VB-1000) Ksdpfji E Alzex Aklonb Spindle speed of 6000 U / min (Model VB-1200, VB-1600) linear guide (VL-Serie) from THK or Rexroth 1 set of operating manual with spare parts list in German language 400V, 50cps, 3 phs CE version incl. CE Declaration of Conformity belt drive with 10.000 U/min door interlock 8,4? Screen spindle chiller coolant through spindle center tool setter (Blum) Warranty: 12 months More information can be found in the Appendix.

Condition: new, Year of construction: 2026, Continuous/Normal drilling capacity (mm) 20/23 (in E335/ST60) Thread cutting capacity (dependent on pitch) M12 Spindle MK II Spindle speed (stepless): 40-4000 rpm Drilling depth (mm) 100 Overhang (mm) 240 Column diameter (mm) 82 Usable work surface (W x L) (mm) 340 x 280 T-slot size (arm), spacing (mm), width dimension (mm) Number 2, 125, 13/26 Speed display Digital Drilling depth display Digital Drilling depth stop: quick-adjusting stop ring Feed (mm/revolution) Manual Table height adjustment with rack and pinion Motor, three-phase 400V with frequency inverter (kW) 1.5 Distance spindle/work surface (mm) 160 – 880 Machine dimensions without packaging (mm) 355 x 705 x 1825 Machine dimensions with packaging (mm) 572 x 936 x 2142 Weight (kg) 195 Standard accessories: Thread cutting device Control panel with OLED display Robust, high-quality drilling head cover with ergonomically angled front LED lighting Quick-adjusting and ergonomic drilling depth stop Knodsir Ir Tspfx Akljb Stepless speed control via central rotary knob EMERGENCY STOP button Thermal overload protection Spindle stop Drill protection with electrical fuse Connection cable with CEE plug Optional accessories Drilling set 3 consisting of: - Machine vice [felix] 2.0 100 mm - Quick-change drill chuck 3-16 mm (accuracy 0.17 mm) - Tapered arbor MK 2 B18 and reducing sleeve MK 2 to Mk 1 €485.00 3-year warranty for single-shift operation Delivery free to your door (only Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Year of construction: 2007, condition: good (used), machine/vehicle number: 164883, OFFER 17015 Technical data: - BIA-certified welding fume extraction unit - Articulated extraction arm 3000 mm - Airflow rate approx. 1000 m³/h - Max. static pressure 2700 Pa - Filter area approx. m² - Filter control indicator for filter replacement - Separation efficiency 99.9 % - Compressed air connection 6 bar Kedpfxohw Ev Sj Aklsnb - Drive - Fan 400 V / 1.5 kW - Space requirement approx. W 700 x H min. 1800 x D 950 mm - Weight approx. 250 kg

Condition: new, Year of construction: 2026, Optimum Metal Bandsaw OPTIsaw S 275NV Metal bandsaws with a swiveling saw blade. S 275NV with continuously adjustable saw blade speed. Article number: 3300265 TECHNICAL DATA Dimensions and weights Length (product) approx. 1400mm Width/Depth (product) approx. 685mm Weight (net) approx. 185kg Width/Depth max. (product) approx. 985mm Height max. (product) approx. 1700mm Electrical data Power of drive motor 1.5kW Connection voltage 230V Knedpfx Akegx T I Uelsb Mains frequency 50Hz Motor power of coolant pump 90W Machine data Saw blade speed(s) 20 – 90m/min Saw blade length 2480mm Saw blade width 27mm Saw blade thickness 0.9mm Cutting angle 0 – 60° Feed rate continuously adjustable Raising of the saw blade manually Cutting ranges Cutting range 0° round (solid material) 225mm Cutting range 0° square (solid material) 190mm Cutting range 0° rectangular (lying) (solid material) 150 x 245mm Cutting range +45° round (solid material) 145mm Cutting range +45° square (solid material) 150mm Cutting range +45° rectangular (lying) (solid material) 190 x 150mm Cutting range +60° round (solid material) 90mm Cutting range +60° square (solid material) 90mm Cutting range +60° rectangular (lying) (solid material) 120 x 90mm Explanation of cutting range: The cutting range is determined using aluminum due to the weight of the saw blade. It may vary when using different materials and may be smaller in some cases (not cutting capacity). SCOPE OF DELIVERY Material stop Bi-metal saw blade Machine base Coolant pump Location: In stock at warehouse 54634 Bitburg - immediately available -