Veneer gluing machine

Fisher+Rückle AG Omnimaster-900

Condition: used, Year of construction: 2009, IN SUPERSILENCED 20' CTR Power (KVA): 1000 Lsdpfxjxvp Efe Adqori Working hours: 10500

Condition: excellent (used), UNLOADER (SINGLE-CAGE) - Vacuum system with its pump Lrodpfxocggy Ss Adqji - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) - Working capacity (cycles/min): 12-15 - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 10

Condition: used, Year of construction: 2021, Lindner Urraco 95 DK – Year of Manufacture 2021 – Well-Maintained Condition For sale is a Lindner Urraco 95 DK from 2021 with 7,230 recorded operating hours. The shredder is in a well-maintained and ready-to-use condition. The exact condition can be seen in the photos. The machine is equipped with the DK4 package, featuring a reinforced gearbox and a reinforced cutting frame. — Specification / Scope of Delivery • 1 set of armoured shafts HW 8/10 with clearing combs and breaker bar, suitable for scrap and waste • 1 set of used shafts HW 8/10 with clearing combs and breaker bar, also for scrap and waste • DK4 package with reinforced gearbox and reinforced cutting frame — Technical Data – Lindner Urraco 95 DK Model: Lindner Urraco 95 DK Year of manufacture: 2021 Operating hours: 7,230 Lsdjx Nkhqopfx Adqeri Engine power: approx. 566 kW (approx. 770 HP) Emissions standard: Stage V / Tier 4f (depending on version) Shaft length: approx. 2,500 mm Shaft diameter: approx. 870 mm Maximum torque: up to approx. 480,000 Nm Machine weight: approx. 46 t Dimensions (L x W x H): approx. 9.2 m x 2.55 m x 3.2 m Chassis: crawler tracks, hydraulically driven Application areas: scrap, commercial waste, bulky waste, mixed waste, wood, recycling material — Condition: Well-maintained machine Fully operational Sale as inspected on site Additional Information / Maintenance History The machine had a full maintenance and service contract directly with Lindner until recently. All maintenance and service work was carried out professionally in accordance with the manufacturer’s specifications and documented. Notes: • Sale is without any warranty or guarantee. • No return or renegotiation. • Subject to prior sale. All information provided is without obligation. The seller accepts no liability for possible errors, omissions, or changes in the details. Sale is exclusively subject to prior sale.

Condition: used, Year of construction: 2021, functionality: fully functional, The BP 800 is an automatic bundle packer. Products up to 760 mm wide and 380 mm high can be packed. - Semi-automatic bundle packer - Pneumatic piston - Swiveling PLC display - Adjustable air flow in tunnel - Transport rods made of heat-resistant fiberglass - LD-PE film 25 – 80 µm - Low energy consumption - Complies with EU standards Technical specifications Power supply: 380 V Output per minute: 10 bundles Usable sealing bar: 760 mm Maximum product height: 380 mm Maximum film roll width: 750 mm flat film Compressed air: 6 bar Lrjdpfxewth Dqo Adqoi Working height: 945 - 1105 mm Machine dimensions: 2665 x 1410 x 2105 mm Weight: 605 kg Download data sheet

Condition: excellent (used), Robland 3200 silver line format saw with a trolley Lrsdpfx Adev S Hy Aeqei scoring saw with a separate engine, trolley length 320cm main engine 7KW 3 speeds max disc 450mm 0-45 tilt electrically adjustable with readout up-down saw electrically adjustable without readout culaga on the right side motorically adjustable up to 1240mm digital readers on the culaga on the trolley angle device included Branded machine in very good condition,

Condition: used, Year of construction: 2019, Equipment: compressed air brake, Heatable front and rear windshield Additional device holder / Lsdpfx Adsr Ilxvsqjri

Condition: excellent (used), Year of construction: 2023, operating hours: 1,600 h, functionality: fully functional, overall weight: 26,600 kg, fuel type: diesel, tank capacity: 4,500 l, color: white, power: 1,800 kW (2,447.32 HP), output current: 3,260 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 1,800 kW (2,447.32 HP), nominal power (apparent): 2,250 kVA, total length: 12,196 mm, total width: 2,500 mm, total height: 2,960 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: MTU, type of cooling: water, 3 Units Super Silent Generator Containers MTU 16V4000G63 – 2,250 kVA Many other sizes available: 1,000–2,500 kVA! For sale are 3 soundproof generator containers equipped with MTU 16V4000G63 diesel gensets (manufacture year 2016), installed in purpose-built super-silent containers (manufacture year 2024). These gensets are engineered for demanding emergency power applications and are housed in acoustically optimized high-cube containers. Container Design: Super Silent, acoustically insulated Quantity: 3 units (2 × right-hand layout, 1 × left-hand layout) Dimensions (incl. exhaust): 12,192 × 2,500 × 3,050 mm Weight: approx. 26,600 kg (empty tank) Color: RAL 9010 (white) Fuel tank: 4,600 liters integrated Generator (Genset) Output: 2,250 kVA Ambient temp.: 25°C Voltage: 400 V, 3-phase Frequency: 50 Hz and 60 Hz Speed: 1,500 / 1,800 rpm Engine: MTU 16V4000G63 Control: DEIF AGC-4 MK2 Alternator: Mecc Alte ECO46 2L/4A with MAUX excitation Cooling: 25°C radiator with electrically driven fan Circuit breaker: Schneider Electric NW04, 4-pole, 4,000 A, motorized, 100 kA Equipment Star-point circuit breaker for open-neutral operation Neutral earthing contactor with CT Automatic pre-lubrication pump Centrifugal oil filter (MTU) Fuel return cooler Water separator fuel filter 9 kW water pre-heater (400 V) Intelligent battery charger (DEIF, 10 A) Ljdpfxsyf U Uxj Adqeri Location: Eferding, Austria Availability: immediately Price: on request

Condition: good (used), Year of construction: 1989, Pressing area 2550 x 1350 mm Number of press cylinders #6 Total pressing force 140 t Opening width approx. 400 mm Operating voltage: 3 x 400 V + N, 50 Hz. Total connected load approx. 26 kW Space requirement (L x W x H) approx.: 3400 x 1600 x 2000 mm Weight: approx. 5500 kg Hydraulic hot plate press Down-piston design Electric hot platens Pressing pressure continuously adjustable via pressure switch Hydraulic pump Central control panel with all operating and Digital temperature display for both hot platens Press cycle counter Safety ripcord Lrodpfjwd N Rmjx Adqji Rack compensation Main switch Note for used machines: • Errors in technical specifications and subject to prior sale. • Subject to change without notice. • Prices quoted are for pickup from the location - free shipping! • The machines have been cleaned and functionally tested. • All machines are sold as seen, without any warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only respond to inquiries if you provide your address and telephone number!)

Condition: new, length 1900 mm width 810 mm height 860 mm internal dimension 1,5 x 0,74 x 0,78 m weight of the machine ca. 200 kg dimensions of the machine ca. 1,9 x 0,81 x 0,86 m For collecting and disposing of bulk goods and industrial waste - Tipping container - forklift attachments for in-house storage of Bulk solids - powder-coated in standard color: RAL 5010 blue, RAL 6011 green or RAL 7016 anthracite gray / special paint on request - Tilting device with base plates for swivel and fixed castors - Drainage device - Stable base frame with drive-in pockets - Favorable load center - Robust sheet steel construction with reinforced edges Lrjdpfx Adsgvqz Isqji Container volume: approx. 600 l

Condition: new, Year of construction: 2024, MONOBLADE EDGER lenht of cut from 4,2 to 8,2 mt max depth of cut 160 mm parallel guide hopper Lredefw Nv Rspfx Adqei