Tractor

Fendt Sieger F365GT

Condition: used, Year of construction: 2023, operating hours: 248 h, maximum speed: 50 km/h, front tire size: 600/70 R30 | 0%, rear tire size: 710/70 R42 | 0%, tire size: 710/70 R42, number of beds: 43, Tires (front): 600/70 R30, Tires (rear): 710/70 R42, Operating hours: 248, First registration: 17.12.2024_____Basic equipment / technical data ENGINE Max. power 180/245 kW/hp (ISO 14396) Max. torque 1100 Nm Maximum output with power management 194/265 kW/hp Max. torque with power management 1178 Nm 6-cylinder, 7.4L AGCO Power - 74 LFNT-5D, CR, 4V Emissions standard (DOC+SC+SCR) without exhaust gas recirculation Stage 5 Electronic engine management with Vistronic fan control Engine speed memory Powercore engine air filter with coarse dirt extraction EasyCare radiator package Additional fuel pre-filter with water separator 500-liter fuel tank Isdevv Dp Nepfx Aaljtd

Condition: refurbished (used), Dear customers currently we offer a disc sanding machine of the brand Zimmermann. Here are some technical datas: Disc diameter: 600mm Table length: 755mm Table width: 285 mm Table tilling up and down: 30/45° Protractor: 60/60° Power: 3,5 kW Speed: 1.500 rpm Dimensions: L 90 cm x B 65 cm x H 130 cm Weight: 290 kg with protractor Itodpfx Ash Dbmyjalod We are looking forward to your questions and inquiries.

Condition: good (used), Year of construction: 1990, machine/vehicle number: 328501, Offer 25366 Technical Data: - Drilling capacity: 25 mm Isdpfexu U Sujx Aaljtd - Spindle taper: MT 3 - Spindle speeds: 100 / 205 / 345 / 440 rpm and 695 / 885 / 1450 / 2900 rpm - Spindle stroke: 130 mm - Spindle overhang: 260 mm - Coordinate table with 3 T-slots: 580 x 240 mm - Table travel X-axis: 415 mm - Table travel Y-axis: 155 mm - Drive: 400 V / 0.75 / 0.9 kW - Required space: approx. W 900 x H 1800 x D 700 mm - Weight: approx. 270 kg - Machine vice

Condition: new, Year of construction: 2023, functionality: fully functional, center width: 390 mm, center height: 310 mm, overall weight: 61 kg, input voltage: 230 V, spindle speed (min.): 50 rpm, spindle speed (max.): 3,500 rpm, spindle mount: MK 2, power: 0.75 kW (1.02 HP), - Fully cast headstock, tailstock and support for smooth running. Itsdpfx Aajtuuv Nelod - User-friendly operation of the cast iron hand rest. - Induction motor with high torque even at low speeds. - Digital speed display. - Hardened steel edge of the hand rest. - 24-step division for locking the workpiece. - Storage compartment means you always have your tips to hand. - Drive-out mandrel and wrench for tightening the clamping disk. - Pre-drilled holes for lighting the headstock. - Easy mounting of accessories: stand, extension, lighting and mobile base frame. - Machine bed width is 160 mm! Medium-sized LAGUNA 1216 lathe is characterized in particular by its robust elements: Cast iron headstock, tailstock, precisely ground bench bed and tool rest with resistant edge made of hardened steel. Another highlight: ergonomic control panel made of anodized aluminium with duralumin speed control. Working speeds: 50-525, 325-1750, 650-3500 rpm. Stepless speed control with duralumin regulator and change between three gear ratios with a simple lever mechanism. The motor technology ensures high torque even at low speeds. Locking the tailstock at the rear: it does not interfere with work, but is still easy to reach. Ergonomic handles with eccentric lock for a very firm grip. - Type: REVO 1216 - Recommended use: Professional production - Power (230 V): 750 W - Speed: 50-525, 325-1750, 650-3500 rpm - Max. Machining diameter over guideway: 310 mm - Center distance: 390 mm - Spindle thread: M33 × 3.5 mm - Headstock / tailstock taper: MK2 / MK2 - Tool rest / tailstock bore: 17 / 17 mm - Quill adjustment: 63 mm - Hand rest shank size: 25.4 mm (1") - Length × width × height: 750 × 226 × 442 mm - Weight: 56.3 kg - Length x width x height: 750 × 226 × 442 mm - Weight incl. packaging: 61 kg - Packaging dimensions: 920 mm × 380 mm × 520 mm Scope of delivery: - Driver tip - center point - face plate - Hand rest - Punch with brass tip - Key for spindle lock

Condition: ready for operation (used), Year of construction: 1980, load capacity: 3,000 kg, Equipment: pallet forks, The forklift was used in warehouse operations. The installed forks have a length of 1,600 mm and additional forks with a length of 1,200 mm can also be supplied. Itsdpfx Aasx Dk Rfoled

Condition: used, mileage: 962,877 km, lifting height: 20,000 mm, Year of construction: 2007, operating hours: 1 h, Drivetrain Drive: Wheel Iodpfx Asxwim Eoaljtd Weights Empty weight: 25.460 kg Functional Lifting capacity: 14.800 kg Identification Serial number: 970090 / 5127349 Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Tyre brand: Goodyear Carrier engine: - Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 0x0x0 Additional information Please contact PFEIFER GROUP for more information

Condition: used, functionality: fully functional, power: 44 kW (59.82 HP), fuel type: diesel, overall weight: 5,400 kg, empty load weight: 3,500 kg, Year of construction: 1999, good condition Itjdpfx Aaeymmlfslsd

Condition: good (used), functionality: fully functional, fuel type: diesel, color: yellow, operation weight: 22,000 kg, number of seats: 1, machine/vehicle number: 8CJ01246, Equipment: cabin, Product Description Used Caterpillar wheel loaders Manufactured by CATERPILLAR Model CAT 980F Operates on Diesel Engine Ijdpfjumtkmsx Aalstd Machine sold as its condition Please contact VIJAY JPN Industrial Trading Pte Ltd 13A Pandan crescent, Singapore 128478

Condition: excellent (used), functionality: fully functional, first registration: 11/2025, fuel type: diesel, fuel: diesel, driver cabin: sleeper cab, emission class: euro6, Year of construction: 2016, operating hours: 714,000 h, MAN TGX 18.440 Year: 2016 Approx. 714,000 km Isdpfoxy Nuhjx Aaletd Tipper hydraulics Very well-maintained condition! Immediately ready for operation

Condition: new, Year of construction: 2023, _____Bale dimensions 1.20 x 1.00 - 1.50 mMax. bale weight 1,100 kgTotal length: 4.55 metersTotal height: 2.51 metersLoading system: Side loading arm with clamping deviceWrapping table: 4 beltsBale guide rollers on the wrapping table: 2 x adjustable Film end sensor, wrapping process stops when the film runs out or breaksVT 30 terminalFully automatic film cutter1 EW and 1 pressureless return or 1 DWSpecial equipmentMagazine for 4 film rolls,Storage location:null Itjdpjki Einefx Aaljd