Cycle-controlled lathe
FAT-HACO TUR 800 MN

Name: FAT-HACO TUR 800 MN
Brand: FAT-HACO
Availability: InStock

Year of construction

2009

Condition

Used (fully functional)

Location

Österreich Austria

Cycle-controlled lathe FAT-HACO TUR 800 MN

Machine data

Machine type:: Cycle-controlled lathe

Manufacturer:: FAT-HACO

Model:: TUR 800 MN

Year of construction:: 2009

Condition:: ready for operation (used)

Functionality:: fully functional

Price & Location

Location:: Österreich

Call

Details about the offer

Listing ID:: A22030613

Reference number:: 2013-E0528

Update:: 01.06.2026

Description

Lathe - cycle controled | Brand: FAT-HACO / Type: TUR 800 MN / Year of construction: 2001,
General overhaul in 2009, Replacement in 2010

The TUR MN lathe - cycle controled is a combination of a conventional and a CNC lathe.
The TUR MN is a production machine for complex parts as a single piece
or in small quantities with high precision.

The machine can be inspected in the factory under power by appointment.
Condition: Fully functional / ready for use.

The general overhaul in 2009 included the following work:
- Machine completely dismantled, cleaned and remounted,
- Maintenance of the gear box, - Machine bed have been grinded,
- Upper bed has been scraped by hands, - Measuring and adjusting the headstock
- Measuring and adjusting the plan and longitudinal slide

Replacement in 2010: Ball screw renewed.

TECHNICAL SPECIFICATIONS:
- Control: SIEMENS SINUMERIK 840D ManualTurn

- Swing diameter over bed max.: 800 mm
- Swing diameter over support max.: 480 mm
- Distance between centers (turning length)max.: 4.000 mm
- Centre height: 250 mm

Headstock:
- Spindle cone (metric cone): 150
- Bore through the spindle: 140 mm
- Spindle speed: 5 - 1.800 rpm
- Spindle speed I: 5 -360 rpm
at N = const.: 90 - 360 rpm
- Spindle speed II: 360 - 1.800 rpm
at N = const.: 360 - 1.800 rpm

Feeds:
Type of the feed drives - servo drives:
- Gradient of the leading spindle (Z/X): 10 mm
- Range of the longitudinal feeds (Z/X): 0 - 6.000 mm/min
- Feed force of the longitudinal feed (Z) max.: 15.000 N
- Feed force of the crossfeed (X) max.: 10.000 N
- Adjustment range of the cross slide (X): 480 mm

- Range of the bedway: 544 mm

Cross slide:
- Width of the cross slide: 330 mm

Tailstock:
- Permitted workpiece weight max.: 3 tons
- Tailstock quill - morse taper: 6 MT
- Diameter of the tailstock quill: 125 mm
- Tailstock sleeve stroke manuell: 280 mm

Drive motor feed rate for X/Z-axis:
- Nominal torque Mn = 15,5 Nm
- Nominal speed Nn = 3.000 rpm

Total power requirement: 39,5 kW
Dcsdpfxozamkzs Am Rsh
Machine weight approx.: 9,3 tons

Dimensions of the machine:
Length: 8.000 mm (incl. chip conveyor which can be dismantled, then it`s
approx. 1.400 mm shorter)
Width: 2.500 mm
Height: 2.200 mm

SPECIFICATIONS / ACCESSORIES:
- 1 steady rest, Ø: 30 - 340 mm
- Documentation

Without guarantee of completeness and correctness of the technical information
and the equipment. - Subject to prior sale -

Seller

Last online: A week ago

Registered since: 2015

13 listings online

Call

Send inquiry

Telephone & Fax

+49 2173 ... show

Fax:

These listings may also fit your interest.

Listing

Germany

1,414 km

Universal Milling Machine
MAHOMH 800 W

Call

Condition: used, Year of construction: 1992, Technical details: x-travel: 800 mm y-travel: 550 mm z-travel: 500 mm spindle taper ISO: SK 40 control: Philips 532 quill stroke vertical: 80 mm turning speed range: 0-600 und 600-4000 steples U/min feed:: 1 - 3000 mm/min. rapid traverse: 6 m/min table surface area: 1100 x 600 mm table feed: 1 - 3000 /stufenlos mm/min switched on hours: 82194 h total power requirement: 9,6 (12 kVA) kW weight approx.: 4200 kg dimension machine xH: 2,9 x 2,2 x 2,5 m The machine is located in the technical department. further technical data: - vertical adjustment table (z-axis) 500mm - Headstock throat depth: min./max.: 200 / 750 mm Equipment: -coolant tank with pump Dcodpfju Nda Esx Am Rjh -Manual control unit (hand operated) -linear measuring system Heidenhain *

See details

Listing

CNC Lathe with y-axis Geminis Goratu Geminis Goratu GHT-4 G4-800

Babberich

984 km

CNC Lathe with y-axis Geminis Goratu
Geminis GoratuGHT-4 G4-800

Call

Condition: good (used), CNC Lathe with y-axis Geminis Goratu - GHT-4 G4-800 Max. turning Ø:800mm Length: 7000mm Width: 2500mm Dcsdpfx Amjygv Eue Rsh Height: 2500mm Weight: 10000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

See details

Listing

Lathe - cycle controled MONFORTS KNC 8S x 4000

Germany

1,029 km

Lathe - cycle controled
MONFORTSKNC 8S x 4000

Call

Condition: used, Year of construction: 1998, Technical details: turning diameter: 830 mm turning length: 4000 mm turning diameter over bed slide: 540 mm spindle bore: 130 mm turning speed range: 2 - 1600 U/min rapid speed: 4 / 5 m/min feed speeds: 1 - 2000 mm/min Dedpfxowwlt Rj Am Rjch total power requirement: 55 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 7 x 2,2 x 2 m with Teach In controll R&D MTC-K MULTIFIX toolpost size D coolant attachment *

See details

Listing

İstanbul

3,088 km

OIL MIST COLLECTOR
INTERSONIKMISCO

Call

Year of construction: 2019, operating hours: 1 h, condition: as good as new (ex-display), machine/vehicle number: MISCO1082, Oil Mist Collecting and Regaining. MISCO is used for collecting and getting rid off the oil in the CNC machines cabin. It is a water vapor, aerosol, smoke, oil mist filtering / separating device. Also allows condensing and recycling the condensed liqud back to the sump The particulate-smoke-gas-water in the air sucked in is filtered through the vapor separation units. The saturated oil-water etc. contained in the air is also separated and recovered, and the air is cleaned by 98% of the dry air. Removal of parts washing machines vapor-mist, Welding fumes, Oily air off CNC machines In the industry and even In the industrial kitchens a lot of oil mist, various gases, fumes and dusts are mixed into the air and create a risk of fire. In addition, they are inhaled by workers and cause damage especially to the lungs, respiratory tracts and other vital organs. For this reason, harmful substances such as gas, dust, smoke and similar substances must be cleaned by absorbing harmful substances in terms of safety and health. Application Areas: CNC Machines Welding fumes, Allows removal of oil vapor and recovery of existing fluid in CNC machines Automotive - Metal Processing – Food Industry - Industrial Kitchens - Steel - Casting - Chemical Industries etc. Working Principle; 1-Entry of dirty smoke –vapor- mist 2- Condensation with laminar flow over the walls Dcsdod Nwk Ujpfx Am Reh 3- Disintegration of the particles passing through the filter 4-Recycling of condensing liquid 5-Dry and clean air evacuation For detailed information please contact us. mistcollector, cnc cutting oil, fume removal, cutting oil fume collector

See details

Listing

Cestona

1,214 km

Bed type milling machine
LagunGBM 22E

Call

Condition: excellent (used), operating hours: 8,064 h, Brand : LAGUN Model : GBM-22E Type : CNC 5 EJES Cnc :HEINDENHAIN 530 Table dimensions : 2.200 x 1000 mm Number and width of T slot: 7 x 22 mm Distance between T slots: 140 mm Axis travels (X,Y,Z) : 2.000 x 1.200 x 1.000 mm Head type : Automático Spindle speed : 4.000 rpm Taper : ISO 50 DIN 2080 Main motor : 28 kw Dcodpfxsyg R Abs Am Roh Continuusly variable speeds : 50➗ 4.000 Speed range : 2 Rapid traverse : 10.000 mm/min Machine weight : 15 tn Electronic hand-wheel : Yes Working hours : Machine running: 22.924 h Control on : 23.132 h Automatic cycle: 8.064 h

See details

Listing

Neubrandenburg

1,419 km

Milling machine
Deckel MahoMH 1000

Call

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 30216 & 30277, feed length X-axis: 1,000 mm, travel distance X-axis: 1,000 mm, Universal tool milling machine Make: MAHO Model: MH 1000 2x available! Dcjdpfjp S Schex Am Rjh x-way 1000 mm tool holder SK 40 digital display . Head tiltable +/- . Table tilt and swivel +/- . Quill stroke . - 3-axis digital display - Universal table 1.250 x 740 mm (T-slot 16 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - 6 autom. quill feeds 0,02/0,03/0,05/0,08/0,12/0,20 mm/Umdr. - central lubrication, manually operated The machine can be inspected with pleasure. Immediately ready for use Free loading, transport no problem.

See details

Listing

Lead/traction spindle lathe VDF HEIDENREICH & HARBECK Hamburg 250

Dortmund

1,087 km

Lead/traction spindle lathe
VDF HEIDENREICH & HARBECKHamburg 250

€5,950

ONO plus VAT

Call

Condition: excellent (used), Year of construction: 1981, Center height: 130 mm Swing diameter over bed: 260 mm Swing diameter over carriage: 140 mm Distance between centers: 600 mm Spindle bore: 30 mm Bed width: 255 mm Spindle mount: DIN 55027 size 5 Speed range: 35.5 - 3,150 rpm Longitudinal feed range: 0.04 – 0.4 mm/rev Transverse feed range: 0.02 – 0.2 mm/rev Metric threads: 0.2 – 18 mm Inch threads: 2 – 76 TPI Module threads: 0.4 – 13.5 module Diametral pitch threads: 2.6 – 36 DP Tailstock taper: MT 4 Drive power: 3 kW Dimensions (L x W x H): 2,140 x 850 x 1,400 mm Weight: 1,100 kg Accessories / Special features: • 3-jaw wedge bar chuck FORKARDT F 160 with jaw safety, Ø 160 mm Dcodpfx Amsxz Rfks Rsh • Quick-change tool post system "Multifix" size B • Coolant system with chip guard • Chuck guard • Hardened bedways • Lighting • Bed stop • Emergency stop switch New brake discs, new drive clutch, new V-belts, and new gearbox and V-belt bearing in 2026. Repair costs: €3,950.00 net. Options: New 2- or 3-axis digital readout K+C, fully installed – upon request Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

See details

Listing

Germany

1,293 km

CNC Lathe
Style650/3000

Call

Condition: ready for operation (used), Swing diameter over bed/cross slide: 650mm/430mm, distance between centers: 3000mm, bed width: 450mm, max. workpiece weight: 1800kg, spindle speed: 2000rpm, rapid traverse: 8m/min, feed rate: 2m/min, quill diameter: 105mm, quill stroke: 225mm, taper: MK5, tool stations: 8. Machine dimensions X/Y/Z: approx. 5300mm/2300mm/2200mm, weight: approx. 7000kg. Documentation available. An on-site inspection is possible. Dcedjxr Nvcepfx Am Reh

See details

Listing

CNC cycle lathe / 8,000 mm VDF Boehringer DUS 1000 Ti

Germany

1,163 km

CNC cycle lathe / 8,000 mm
VDF BoehringerDUS 1000 Ti

Call

Listing

Sliding bed lathe EST TICINO - ET-BM-CT Est Ticino ET-BM-CT 520

Babberich

984 km

Sliding bed lathe EST TICINO - ET-BM-CT
Est TicinoET-BM-CT 520

Call

Condition: excellent (used), Year of construction: 1996, spindle bore: 160 mm, Swing over bed Ø 1040 mm Swing over cross slide Ø 710 mm Swing in the gap Ø 1580 mm DBC Turning Length 3000/4500 mm Gap length 1500 mm Spindle bore 160 mm Djdextbf Eepfx Am Roch Spindle power 40 kW Bed width 800 mm Spindle taper 6 Mk Workpiece weight 3500 Speeds / ranges 800 Rpm Feed rate X-Axis 10000 mm/min. Feed rate Z-Axis 10000 mm/min. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

See details

Advertise here