Paint overspray disposal

Farbnebelentsorgung

Condition: used, used overspray extraction system Condition: age-appropriate on castors Gbsdjw I Ut Tepfx Acwsk Availability: short-term Storage location: Röllbach

Condition: new, Year of construction: 2026, - Capacity 1.2 mm Gbsdpfx Ajgg Nrkecwek - Extension 250 mm - With 8 sets of rollers

Condition: used, Year of construction: 2001, Baffle width: 4000 mm. Baffle height: 1000 mm. External dimensions: 4600 x 1500 mm. 2 x 1.5 kW motors. Total nominal flow rate: 7000 m³/h. Right and left exhaust nozzles with 300 mm diameter. Godpsvvizkefx Acwjbk Storage location: Garbsen

Condition: as good as new (ex-display), Year of construction: 2011, Used storage tank made of steel according to EN 12285-1 (with test certificate) double-walled, for underground storage of fuel oil and diesel fuels, 1 dome (alternatively 2 domes possible). Capacity: 100,000 liters diameter: 2.900 mm length: approx. 15.750 mm Weight: approx. 18,800 kg In addition, we can also equip our tanks with the following accessories: - Leakage monitoring with under- and overpressure leak detector Gbedpfxsi Enxdj Acwsk - Dome shaft with shaft cover in walkable or traversable drive-over design - Partition walls (as multi-chamber tank) - Interior coatings (e.g. 2-component epoxy resin), partial or full linings - Content and level measuring devices as well as control and regulation technology - Electric tank heaters - Pumps for heating oil, diesel, biodiesel or gasoline - Dispensers for diesel, biodiesel and gasoline - with complete tank data acquisition on request - External tank insulation with PU foam Tank is cleaned inside and outside coating is overhauled and checked with 14 kV. A cost-effective delivery with our own truck is possible. Just tell us the delivery place, you will get the exact freight cost immediately. If you need any further information, just give us a call or send us an e-mail. Trade-in and purchase of tanks/containers is possible, just contact us. Delivery time after arrangement! We have such tanks of course also in the following sizes constantly in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters.

Year of construction: 2013, condition: used, Features: * Used telescopic belt conveyor. * Condition: fully functional with traces of use * Ideal for fast material transport * Professionally disassembled and packed * Incl. feet * Incl. control cabinet * 3 pieces in stock * Price per piece Technical data: Manufacturer: VanDerLande Year of manufacture: 2013 Model: TTB-800- 4x16 Belt direction: loaded and unloaded Color: anthracite gray Total length retracted: 5.550 mm Total length extended: 16.000 mm Total width: 1.500 mm (incl. control cabinet) width: 1.220 mm belt width: 800 mm Condition: good (used) belt type: smooth / black Conveying height: 1.100 mm Own weight: 3.300 kg Two speed levels adjustable. Telescopic belt conveyor Gbodeiuqcwepfx Acwsk The telescopic belt conveyor is ideally suited in the picking zone to interlock machines or workstations and to optimize the internal process flow. During transport, the telescopic belt conveyor can convey sensitive and differently sized totes, boxes or other packaging and item units to the loading or delivery point and also serves, for example, as a connecting route in front of or between production and processing machines. It also enables efficient parts transport in the plant and warehouse and is used to convey considerable conveying volumes and distances. Customized solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods, we are your competent partner! We will be happy to prepare your individual offer or advise you on design or installation issues. Simply let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of specialists. For companies in a wide range of industries, such as: Logistics, pharmaceutical industry, trade or the electronics industry, we have already successfully realized projects. Together we will work out ways to optimize your process and material flow in a cost-effective and sustainable way. We can even offer you fully automatic sorting technology or supplementary components such as picking racks or containers.

Year of construction: 2020, condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSWi 20.20 Dry splash wall Dimensions: 2000 x 2000 mm W X H Gjdpfx Acjfr T Eqewebk Fan is built into the wall Air capacity: 7,200 m³ / h Motor: 1,50 kW ex-proof exhaust air pipe: 400 Ø mm depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+150,- EUR net) Options/additional price for: transition angular to round: 150,- EUR net Paintstop filter mat terminal strip: 150,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Condition: new, *Technical standard specification: Unit type: 6/150 Heating capacity: 6 kW Cooling capacity: 45 kW (Performance data at 80°C flow temperature and 15°C cooling water temperature and a pressure difference between cooling water inlet and outlet of at least 2 bar) Medium: water up to 150°C Maximum external volume: 9 ltr at 150°C *Functional equipment: - Cooling and filling controlled via solenoid valve - Automatic filling via cooling water - Level monitoring by magnetic float switch - Dirt filter in return flow of circulation and cooling water inflow - Reversing circuit for leakage stop operation (usable up to system closing temp.) - Ball valve in flow & return - Automatic temperature-dependent system closure - Filling time monitoring and aquatimer - Adjustable pump overrun - Adjustable temperature alarm - Options: Interface cable - Regulation and control unit SBCmini, with relay for common alarm, 230V, on rear of controller on terminal block - Heating control SSR - Control box IP54 - Interface 20mA TTY; pin assignment Arburg - Cekon plug 16A - Corrosion-resistant components (VA,MS) - Unit mounted on castors, two of them steerable with brake - Additional temperature fuse for safe shutdown of the heating on heating contactor - Bypass between flow and return with reduced cross-section Gbodpfxofnvwqo Acwok *Pump: Type: Y2051 Delivery rate (max) 27 ltr/min Delivery pressure (max) 4.5 bar Motor power 0.5 kW Type of submersible pump / peripheral impeller *Dimensions/Weights/Colours Dimensions L/W/H: 600 mm x 240 mm x 493 mm (without connection) Weight: approx. 43 kg Colour: Housing: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections: Circulation medium socket G1/2" cooling water socket G3/8" *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: excellent (used), total width: 36,000 mm, total length: 90,000 mm, total height: 9,500 mm, For Sale: High‑Quality Steel Warehouse Hall Structure – ASTRON LINDAB Good morning, We are offering for sale an exceptionally solid and durable ASTRON LINDAB steel warehouse hall structure with a total area of approximately 2,800 m² and a height of over 8.5 meters. This structure was originally erected in Warsaw for the renowned company PURMO RETTIG HEATING, a global leader in the heating industry. A few years ago, the entire property on which the hall was located was sold and redeveloped into a new residential complex. As a result, the warehouse hall was fully dismantled under the supervision of ASTRON LINDAB representatives. All structural elements were then transported and reassembled on another of our properties, strictly in accordance with ASTRON LINDAB guidelines. The dismantling and reassembly were carried out by a professional, specialized company. Every structural element has been catalogued, labelled, and numbered. Technical Specifications: Total area: approx. 2,800 m² Span width: 36.6 meters Total length: 90 meters Height: 8.64 meters (maximum height 9.36 meters) Number of segments: 14 No internal support columns Modular Sale Option The hall can be sold as two or three smaller modules, for example: 1,500 m² / 1,000 m² / 800 m² Please note: the price of smaller modules is 25% higher. The current market price of a new, identical structure is approximately: PLN 1,700,000 net / EUR 400,000 net Important Information: We are selling only the steel structure, including all steel tension elements and structural bracing, steel structures of the side walls and roof. Roof and wall cladding panels are not included and must be purchased new and installed after erecting the structure. Additionally, we have all original bolts, nuts, and dismantled components, carefully sorted and stored in two large maritime containers. We also possess the original hall design documentation and can provide access to a structural engineer if a new adaptation or a building permit design is required for this structure. Gbedeylc Uyopfx Acwek This offer represents a unique opportunity for anyone planning to construct a similar warehouse hall at a significantly reduced cost. PRICE: EUR 179,000 netto (750.000zł netto) We invite serious buyers to contact us.

Year of construction: 2020, condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSWi 30.20 Dry splash wall Dimensions: 3000 x 2000 mm W X H Fan is built into the wall Air capacity: 10.800 m³ / h Motor: 2,20 kW ex-proof Gjdpfxsfr T Emj Acwobk Exhaust air pipe: 500 Ø mm depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+180,- EUR net) Options/additional price for: transition angular to round: 150,- EUR net Paintstop filter mat terminal strip: 180,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Condition: used, machine/vehicle number: 006645, Max. panel width: 5600 mm Godpfxjv Ir Sce Acwsbk Max. panel length: 2850 mm Main saw blade projection: 125 mm No of Grippers: 11