Leadscrew/feedscrew lathe/EXCELLO DLZ

EXCELLO DLZ 500 SL

Condition: used, Year of construction: 1965, multifix ja centre distance 1500 mm documentation ja weight of the machine ca. 3 t Gusdpfsxylq Ejx Afcea

Condition: used, functionality: fully functional, Used Schenck Balancing Machine H 50 V/B with used CAB 690 H measuring unit. (Can be upgraded to a new CAB 920 unit for an additional (18 000–20 000€) Gedpfsx Ein Sjx Afcjua The machine comes with original foundation drawings, documentation and manuals. The machine can be test run in Kerava. Rotor Capacity - Rotor weight range: 20 – 6 000 kg - Maximum symmetrical load on pedestal bearing: 7 500 kg - Maximum symmetrical load on stand bearing: 3 750 kg - The machine can be loaded freely with lower weights when following recommended procedures. - Maximum rotor length between pedestals:1 600 mm (belt drive) - Maximum diameter over machine base: 2 100 mm - Clamped rotor diameter ranges: 25–180 mm, 180–380 mm - Machine bed length: 3 500 mm - Balancing speed n depends on the rotor’s moment and must be selected to avoid overloading the drive. - Maximum permissible G·n² value: 1400 × 10⁶ kg/min² - Applies to a rigid symmetrical rotor mounted on pedestal bearings. - May be exceeded during dynamic tests on flexible rotors and strength tests. - End drive / FU motor: 7,5 kW - 4-speed gearbox: 120–2520 rpm - Belt drive BU 5 / FU: 7,5 kW - Unbalance Umar 0,5 gmm/kg: 0 gmm/plane

Condition: ready for operation (used), Lathe Fabr Takisava Type TAL 510 with lathe chuck + quick-change holder + center punch Guodpevyuuqefx Afcoa

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Center height 210 mm Swing diameter over bed: 420 mm Swing diameter in bed bridge: 580 mm Swing diameter over cross slide: 250 mm Center distance: 1000 mm Spindle nose: D1-6 Speed: 45 – 1800 rpm (16 steps) Spindle bore: 52 mm Feed length: 0.05 – 1.7 mm/revolution (17 steps) Cross feed: 0.025 – 0.85 mm/revolution (17 steps) Metric threads: 0.2 – 14 mm (39 steps) Whitworth: 2 – 72 TPI (45 degrees) Module thread 0.3 – 3.5 MP, (18 steps) Tailstock sleeve diameter D50 mm Tailstock sleeve travel 120 mm Tailstock taper MT4 Power 3.3 kW/400 V Machine weight 1270 kg Dimensions (L x W x D): 1940 x 850 x 1320 mm Accessories - 3-axis digital measuring system - Steady rest - Traveling steady rest - 3-jaw chuck mounted, D200 mm - 4-jaw chuck D250 mm - Chuck guard with safety switch - Rear splash guard - Tailstock - Cooling water system - Chip tray Guedpfx Afex Rt Euecoa - Tool holder guard - Longitudinal travel stop - Halogen work light - Emergency stop button - CE marking - Machine documentation The machine is a brand new showroom model and has 0 operating hours. It comes with a 12-month spare parts warranty.

Condition: used, total length: 6,800 mm, total width: 2,200 mm, total height: 2,000 mm, Empty weight: 11.000 kg Price: On request - Documentation available: Yes - CE certificate present: No - Drive system: Conventional - Centre height [mm]: 630 - Swing over bed [mm]: 1300 - Carriage turning diameter [mm]: 1000 - Distance between centres [mm]: 4000 - Bed width [mm]: 700 - Spindle bore [mm]: 120 - Min. spindle speed [rpm]: 2.8 - Max. spindle speed [rpm]: 400 Gedsx Iriajpfx Afceua - Options: Three-jaw chuck, Four-jaw chuck, Removable bed, Quick-change tool post, Fixed steady, Travelling steady - Swing over removable bed [mm]: 1700 - Transport dimensions: 6800mm x 2200mm x 2000mm (l x w x h) - Transport weight [kg]: 11000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 1987, condition: ready for operation (used), A conventional lead and feed screw lathe Nardini is available. Swing over bed/cross slide: 440mm/260mm, turning length: 1380mm, taper cylindricity over 100mm: 0.3mm, roundness: 0.03mm, runout: 0.03mm, squareness over 100mm: 0.05mm. An on-site inspection is possible. Guodpfx Afoxq Eyzecja

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, We are selling this lathe. It is connected and can be tested under power. The machine comes with accessories. Turning diameter: 2,000 mm. Turning length: 10,000 mm. Maximum workpiece weight: 60,000 kg. Machining diameter: 2,000 mm. A video of the machine can be sent via WhatsApp. Gsdpfxsxwmbme Afcsua

Condition: used, Year of construction: 2007, table diameter 4520 mm table load 35000 kg swivelling range 110 Grad total power requirement 44 kW weight of the machine ca. / t required space / m Type: ROMAT 350 / LVEB-120000N-4m / VVEs-D-18000N-5m-S / QVEB-2m travelling beam / CR-200000N / Hydraulic scissor lift table In the scope of delivery: Item Designation 1 Welding power source GLC 603 Quinto SD 2 Wire drum 3 Service door 2.1 4 Robot control cabinet 5 Service door 1.2 6 Scissor lift table (shown in parking position) 7 Cross-travelling unit QVEB 8 ROMAT 350 robot 9 Service door 1.1 10 Safety fence 11 Platform 12 Positioner 13 Sliding door 1 14 Linear traversing unit LVEB 15 Vertical traversing unit VVEs 16 Sliding door 2 The disc ring on the table is a device that is not included in the scope of delivery ----- Technical data - Mechanical dimensions (without control unit and superstructures): approx.6440(57 7 0)x4520(2700)x5460(3320) LxWxH - Turntable diameter: 4520mm - Weight: approx. 25,000kg (without superstructure) - Speed range: 0.004 - 1.07 rpm - Welding current coupling: 600 A - Maximum table load capacity: 35 tons (according to load chart) Ambient temperature Storage / transport 0 to 60'C Operation +4 to 35 "C Interfaces Central transfer point for control, power supply, earth connection ----- 2.3 Linear traversing unit, LVEB Type LVEB-120000N 4m Dimensions W x D x H 7,700 x 2,440 x 776 mm Weight 4,355 kg Travelling distance 4,000 mm Load of the carriage 120,000 N Drive unit Gear motor Precision bevel gear motor Manufacturer Stöber Type K402VF0250EK703V Power 4.21 kW Voltage UKE 140 V / 1000 rpm Current Rated current IN: 8.32 A Type of current Standstill current I0: 9.04 A Motor speed 3,000 rpm Gear ratio i = 25.28 ----- 2.4 Vertical traversing unit, VVEs Type VVEs-5m Dimensions W x D x H 2,000 x 1,960 x 7,150 mm Weight 9,500 kg Travelling distance 5,000 mm Max. moving mass 18,000 N Drive unit Gear motor Bevel gear motor with brake Manufacturer Stöber Type K713VF0790MQ30ED704B Power 4.8 kW Motor speed 2,000 rpm Gear ratio i = 78.83 (20181/256) ----- 2.5 Cross-travelling unit, QVEB Type QVEB-2m Dimensions W x D x H 1,270 x 4,100 x 756 mm Weight 1,950 kg Travelling distance 2,000 mm Load on the travelling beam 10,000 N Max. moving mass 18,000 N Drive unit Gear motor Precision flat geared motor Manufacturer Stöber Type FS202VQ0145ED402U Power 1.43 kW Voltage UKE 140 V / 1000 rpm Rated current IN 2.86 A Type of current Standstill current I0: 3.1 A Motor speed 3,000 rpm Gear ratio i = 14.65 (3180/217) ----- 2.6 Rotary indexing table Type CR-200kN Manufacturer Cloos Gujdpfx Asrmulvefcoa Dimensions W x D x H 1,820 x 2,120 x 541 mm Weight 2,850 kg Drive unit Gear motor Bevel gear motor Manufacturer Stöber Type K814VG1540EK803U Power 6.7 kW Motor speed 3,000 rpm Gear ratio i = 154.322 ----- 2.7 Robot ROMAT 350 Type ROMAT 350 Dimensions (W x D x H) in reference position 1,900 x 600 x 1,500 mm Weight 205 kg Footprint 500 x 515 mm N...

Condition: excellent (used), Year of construction: 2012, operating hours: 1,800 h, functionality: fully functional, workpiece weight (max.): 20,000 kg, total width: 3,000 mm, total length: 9,000 mm, total height: 3,000 mm, type of input current: DC, SCHENCK, HM60U, max diameter 3000mm, max weight of rotor 20.000 kg, New measuring unit CAB920 SmartTouch (2025) SCHENCK, Protection enclosure included, CE sign, calibration certificate February 2026, drive 75kW drive with high speed gear box 3 shifts, pair of roller bearing for journal dia. 50 - 200 mm, pair of roller bearing for journal dia. 200 - 400 mm, lubrification system for roller carriages Gujdpfx Ajylin Hofcsa

Condition: used, power: 54 kW (73.42 HP), fuel type: diesel, fuel tank capacity: 146 l, color: gold, lifting height: 18,000 mm, Year of construction: 2023, operating hours: 1,990 h, Year of manufacture: 2023 Empty weight: 11.520 kg Gjdpfxexq Rl Aj Afcoua Carrying capacity: 4.000 kg GVW: 15.520 kg Dimensions (LxBxH): 626 x 232 x 270 cm Working height: 1.800 cm