Welding kit

Esab Esab LTG 150

Condition: new, welding current max. 200 A open-circuit voltage 14 - 24 V connected load frequency 230 V weight 25 kg Dimensions (LxWxH) 500 x 200 x 300 mm Equipment: Hose package Kfedpfx Ajg U Tccea Esa Ground cable Welding nozzles

Condition: used, TIG Welding Machine MESSER GRIESHEIM Type Combitig GW 23 AC/DC Kfsdpfx Aasdzqa Ie Esa The machine only operates with direct current welding and contact ignition Serial No. 445276 Year of manufacture: approx. 1990 Output: 230 Amps = 35% duty cycle 180 Amps = 60% duty cycle 140 Amps = 100% duty cycle Infinitely variable setting range Current type: DC Mains connection: 400 V, 50 Hz, 32 A plug - 2-stroke / 4-stroke welding mode - DC welding with contact ignition works - AC welding and high-frequency ignition do not work - 7 meter hose package with hand torch - Connection plug for remote potentiometer (foot pedal) – foot pedal not included - Air-cooled - Gas pressure regulator Required space (L x W x H): 850 x 480 x 600 mm Weight: approx. 90 kg The welding test shows good results when welding stainless steel with DC; the HF ignition does not work, but the arc can be ignited via brief contact. When welding aluminum with AC, no arc is formed.

Year of construction: 2013, condition: ready for operation (used), A Rehm Invertig Pro 350 AC DC and a Rehm Invertig Pro 450 DC are available, used and in good condition. 1) Invertig Pro 350 AC DC, standards: IEC 60 974-1 IEC 60 974-2, welding current range TIG: 3-350A, output voltage U₂ at maximum current: approx. 24V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent for TIG at 350A, mains voltage input: three phase 400V 50Hz, protection class: IP23S, protection category: S, setting range: 3-350A for TIG in this AC DC version, duty cycle 100 percent at 40°C 350A for TIG 100 percent duty cycle, input fuse protection: 32A at 3x400V for the 350 AC DC version, length: 520mm, width: 360mm, height: 460mm, weight: 29.5kg for AC DC version. 2) Invertig Pro 450 DC, standard: IEC 60 974-1, welding current range TIG: 3-450A, output voltage U₂ at maximum current: approx. 28V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent at 450A TIG, lower for electrode welding approx. 60 percent, mains input: 3x400V 50Hz, protection class: IP23S, duty cycle at 100 percent 450A TIG at 40°C, electrode welding current approx. 360A at 100 percent duty cycle for electrode in the 450 DC version, input fuse protection: 32A at 400V three phase for 450 versions, length: 520mm, width: 360mm, height: 460mm, weight: approx. 28kg. An on-site inspection is possible. Ksdpsxddamjfx Aa Esfa

Condition: ready for operation (used), Year of construction: 1998, MIG-MAG welding system Set welding current: 50 - 400 A Kfsdpfx Aajwx Hz Ej Eea Max. welding current at 45/60/100% duty cycle: 400/345/265 A Open circuit voltage: 16.5 - 45 V Standard wire feed for steel: 1.0 + 1.2 mm Wire feed speed: 1 - 20 m/min Electrical connection: 380 V Weight: 164 kg Space required: 950 x 550 x 850 mm

Condition: used, machine/vehicle number: Nxxxx, Year of construction: 2008, Please contact ATS Norway for more information Please provide reference number upon request: 21536 Specifications: Model year: 2008 Not EU-approved Curb weight: 10,530 kg Gross vehicle weight: 43,500 kg Lifting axle: 1st axle Steering axle: 3rd axle Tires: See pictures Tarpaulin cover PKK inspection faults present Kjdjxm S Uqopfx Aa Eefa Delivery by agreement Description:Nor-Slep SE-42 3-axle tipper semi-trailer from 2008, with tarpaulin cover. Reasons for not being EU-approved:– Non-functional lights– Frame beam has a fracture on the left side near the 2nd axle at the airbag mount– Missing wheel protection and mud flaps on both sides of the 3rd axle Tarpaulin is included and in fair condition.Delivery by agreement. Technical approved: no EU-approved until: 12.02.2025 Own weight: 10530 Total Weight: 43500 Payload: 32970 Width: 255 Length: 1170 Model: SE-42 3 akslet tippsemi m/ kapellduk

Condition: used, current intensivity 140 A plate thickness 1,5 mm welding range CO2: 35 - 225 A welding range 30Ar+CO2: 30 - 250 A weight of the machine ca. ca. 90 Kg Kfsdpfx Aoxbtmdoa Eja dimensions of the machine ca. 0,4 x 0,8 x 0,8 m

Condition: used, Year of construction: 2012, manufacture NIMAK electric cabinet Rexroth - Bosch Group dimension div. verfügbar In our opinion, the machine is in good used condition Condition and can be viewed by appointment. Welding tons Technical features: - including control unit There are around 150 different welding tons available. Ksdpjxrg Ebefx Aa Eofa Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!