1993 Emmegi Sirio 2

Emmegi Sirio 2

Condition: reconditioned (used), functionality: fully functional, Effective cutting length: 4000 mm Blade diameter: 450 mm Pedpfx Aezgh Umokisrc Pneumatic tilting of the cutting heads Tilting angle: 90-45°

Condition: excellent (used), Year of construction: 2021, Cutting centre for standard profiles, as well as lift-and-slide door frames and thresholds, Thorwesten ASZ 3.2M in a special design. Processing length 6,500 mm for standard profiles and the Veka 82 system for lift-and-slide door frames and thresholds. Equipped with extended infeed and outfeed. Lifting and guide rollers located under the drive belts ensure smooth transport of sliding door frames. Stepless cutting angle adjustment from 22.5° to 157.5°. Automatic optimisation and processing of off-cuts. Saw blade diameter 500 mm. Includes dust extraction system and waste conveyor. Configured for the Veka profile system, including widening options and special profiles. Pjdozhi Nhjpfx Akijrc Full HD panel with Windows 10 operating system.

Condition: used, Year of construction: 1995, cutting width 375 mm Cutting height 150 mm dimensions of saw-blade 500 x 30 mm Motor output 2 x 3 kW Cutting length 5100 mm speeds 2800 U/min air pressure 6 bar weight of the machine ca. 700 kg dimensions of the machine ca. 6100 x 1450 x 1450 mm * Profile support plate made of steel * Stable cast construction of the saw unit * Large cutting range, 2 profiles can be cut at the same time * Easy adjustment of the moving unit with roller guides * Double storage of the swivel device * Safe clamping thanks to the two-pressure system * Double saw feed guide * Hydropneumatic saw feed * External dimension correction scale Predstv Rgropfx Akijc * Left saw unit fixed * Swivel range 45°-90° * Including suction (without piping) ALKO Mobil-Jet 100 year of manufacture 2002

Condition: new, Year of construction: 2026, Miter saw and cut-off saw, type: ZS 200 N - 5 KW motor with machine stand, but without saw blade Machine operated via handwheel and worm gear (rear) Tilting Predpfxsi Dfido Akiec Saw blade diameter: 520 mm, saw blade arbor bore: 50 mm Saw blade speed: 2800 rpm 400 volts / 5 KW (S6/40%) motor with brake and automatic star-delta motor switching Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: when tilted: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees when tilted: 140 mm The saw can be tilted to an acute angle of approximately 25 degrees on one side and tilted flat to the left up to 30 degrees. Machine weight: approx. 250 kg Location: Available from stock in 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 902 S Hidrolik Alüminyum Köşe Presi Makinesi, • Complies with CE standards • Corner press machine designed for joining aluminium profiles at 90 degrees • 2 upper presses and blade movement are hydraulic • Equipped with a mm scale system for adjusting blade height and feed • Centering square stop is hydraulic • Drain button for fine adjustment is available • Machine comes with 2 pieces of 4 mm blades • 2 pedals are used for hydraulic pressing and profile clamping Predperbk Tfefx Akisc • Polyamide plate is provided to prevent damage to profile surfaces • Left and right profile support arms are available

Year of construction: 1985, condition: good (used), Offer 22556 Technical Data: - Saw blade diameter: 420 mm - Saw blade bore: 30 mm Prsdeimdlrepfx Akiec - Max. cutting length: 3000 mm - Smallest cutting length at 90° + 45°: 335 mm - Cutting range, see diagram attached - Swiveling range inwards, manual: 90 - 22.5° - Tilting range inwards, manual: 90 - 45° - Saw blade speed: 2800 rpm - Drive: 380 V / 2 x 4000 Watt - Compressed air connection: 7 bar - Air consumption per working cycle, approx.: 64 l - Space requirement, approx.: W 4500 x H 1950 x D 1600 mm - Weight, approx.: 1400 kg - Including: - Cutting length adjustment with positioning control - Positioning control renewed around 2002 by WOLFF GmbH - Saw head swiveling and tilting for high and wide profiles, - as well as miter cuts

Year of construction: 2004, condition: good (used), machine/vehicle number: 2004-3-11A, - Feed of the milling head manually - Work table height adjustable via handwheel - Horizontal and vertical material clamping - Milling cutter diameter up to 250 mm - Max. milling height 150 mm - Max. milling depth 80 mm - Max. milling length 305 mm - Angle-adjustable stop, left and right 20 - 90° - Milling spindle speed 4500 rpm - Drive 400 V, 3.2 kW - Compressed air connection 6 - 8 bar - Air consumption per working cycle 10 l - Pneumatic profile clamping - Table stand Prodpfef E Higsx Akioc - Space required approx. W 1100 x H 1300 x D 700 mm - Weight approx. 200 kg

Condition: new, Year of construction: 2026, Comparable to: e.g. Emmegi Double mitre saw for steel Cutting length: 5,000 mm Equipped with 7 NC axes for length positioning, outward and inward saw blade inclination, saw blade feed, and saw motor speed control Torsion-free welded construction with longitudinal linear guideways 2 x saw motors, each 4.5 kW Saw blade speed: 0–250 rpm Saw feed motorized from rear to front Feed speed infinitely adjustable Motorized angle adjustment between 135° and 45° Suitable for HSS circular saw blades, Ø 400 mm Pneumatic protective covers Water cooling with pump and coolant tank Left saw unit fixed to the base frame, right unit motorized and traversable Positioning accuracy: ± 0.15 mm Max. traverse speed: 25 m/min Length positioning compensates for saw angles and profile height Each saw head fitted with three horizontal and vertical profile clamps; in the event of pressure loss, the horizontal cylinders remain clamped Pneumatically swivelable material support between the saw heads 15” touchscreen Single cut processing Processing of cutting lists Creation of cutting lists via keyboard Prjdsyinu Hjpfx Akioc Import of cutting lists via USB flash drive or network interface Corner cutting Overlength cutting Short cuts from 5 mm cutting length Crosscuts Available options: Micro-spraying unit Saw head inward inclination increased to 150° Label printer Barcode scanner Additional network interface and teleservice agreement

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 13000x1700x1700 mm Weight 1950 kg Total power requirement 13,5 / 17,5 kW kw Psdpfx Akjv A Htqeiorc

Condition: used, Year of construction: 2008, Technical details: max. workpiece diameter: 29 mm min. workpiece diameter: 26 mm workpiece length: 66 mm the system was originally delivered for the following workpiece sizes: diameter 26mm - 29mm length 65mm - 66mm Changing parts in the clamping device, handling, etc. would probably result in diameters of up to approx. Ø50mm Pjdpfxslqac Ss Akijrc Total length will probably be almost 400 mm possible with a few conversions. Also dependent on tool lengths, machining lengths on the component, etc. *