5-axis CNC bar processing center

ELUMATEC SBZ150

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: 1500050182, Elumatec SBZ 150 5-axis profile machining center for aluminum profiles up to 7.3m and thin-walled steel profiles. Due to a production changeover to a tube laser system, we are selling our fully functional Elumatec SBZ 150. Service was performed by Elumatec in March 2026, and we have not used the machine since then. Interested parties are welcome to visit us at any time. We would be happy to demonstrate and allow you to test the machine. Technical data: - X-axis travel: 7300mm - Y-axis travel: 1000mm - Z-axis travel: 650mm - A-axis swivel angle: 0-90°, freely programmable - C-axis swivel angle: 0-355°, freely programmable - Max. machining length without end-face machining: 7300mm Godsy Dvq Hopfx Aciebt - Max. machining length with end-face machining: 6980mm - Tool changer with 10 positions, as well as a saw blade holder - 8 material clamps - Tool holder HSK63 - Spindle power 15kW / 22000 RPM - 2-layer machining - Minimum quantity lubrication - Central lubrication - Saw blade 400mm Machine is available immediately! Space requirements can be found in the layout in the appendix. The transport instructions can also be found in the appendix; if you have any questions, please do not hesitate to contact us. Due to the planned re-installation, dismantling, loading, and transport should preferably be organized by the buyer. Various auxiliary tools can be provided upon request, if available. All information and dimensions have been provided to the best of our knowledge and belief, but no guarantee can be given for completeness and accuracy! The sale is made as is, without any guarantee, return policy, or similar. Subject to prior sale.

Condition: new, Year of construction: 2025, Modern, high-performance, and universal double miter saw for wood, aluminum, and plastic profiles. Stock machine: Subject to prior sale • Large cutting capacity (165 mm cutting depth at the table) • Double cut possible • Stepless fixation of intermediate angles • Pneumatic swivel function as standard • Infinitely adjustable hydropneumatic saw feed • Torsion-resistant machine bed • Swivel range for both units: 22.5° inward, 90°, 135° outward • Precision-ground saw table / base plate • Direct position measurement system (magnetic sensor) available in all versions Gbsdpfx Acsxta Tujiot • JETTER drives and controls • 15″ industrial touch panel (IP65)

Year of construction: 2005, condition: excellent (used), functionality: fully functional, elumatec SBZ150 Profile Machining Centre 6.0 m 5-axis control. Efficient machining of aluminium and steel profiles Working length: 6,000 mm Description: Short tool change times; Automatic tool changer for eight standard tools and three special tools (saw blade, special milling cutter diameter 50 mm, angle head or special milling cutter diameter max. 100 mm); Six-sided machining; Underside machining with angle head (option); Rapid base positioning (up to 60 m/min) of the processing unit in the X-axis; Low-wear direct drive; With automatic clamp detection and positioning; Dual-circuit clamping system with two pneumatically retractable stops; Standard with automatic central lubrication system; Robust machine bed for a working length of 6,000 mm; Continuous support table; Clamping system with integrated six-row recirculating roller units and linear guides. 5-axis industrial PC control, with 3 axes for path control; High-dynamic three-phase servo drives with resolver and digital servo controller; Swivel angles of the A and C axes freely programmable; With color screen and disk drive; Memory capacity of over 200,000 sets; 3 serial and 1 parallel interface for online connection; Barcode scanner, label printer, etc. Integrated network card 10/100 MBit, RJ 45 port (network connection by customer’s IT administrator) Analog modem (customer must provide an analog telephone line) Technical data: Travel range X-axis: max. 6,240 mm Max. travel speed 60 m/min. Gbodpjw A Rv Ijfx Acist Travel range Y-axis: 1,000 mm Max. travel speed 30 m/min Travel range Z-axis: 635 mm Max. travel speed 30 m/min. Swivel angle A-axis: 0-90° freely programmable Swivel angle C-axis: 0-355° freely programmable Further details on the milling range see drawing no. 150 05 17 08 Max. processing length for face machining left + right: 6,000 mm (with tool length 150 mm) Positioning accuracy: X-axis +/- 0.1 mm / 1 m length Y-axis +/- 0.1 mm Z-axis +/- 0.1 mm Milling spindle: Speed [rpm]: up to 100–22,000 Power [kW]: 15 Tool holder: HSK-F 63 Milling cutter diameter: 100 mm max. Saw blade diameter: 400 mm Tool length: max. 150 mm from nominal taper. Included accessories: Automatic tool changer (without tool holders); Dual-circuit clamping system with 2 pneumatically retractable material stops; Automatic clamp detection and positioning; 8 horizontal pneumatic material clamping units; Tool presetting gauge Front light barrier Saw blade D400 with mount Angle milling head Important: The profile machining centre is fitted as standard with front light barriers. Any necessary side or rear guarding must be supplied on-site by the customer or please request an offer for safety fences from us. Incl. Angle milling head for underside machining

Year of construction: 2004, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 9,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 630 mm, spindle speed (max.): 24,000 rpm, machine/vehicle number: 031809, TECHNICAL DETAILS X-axis travel: 9,500 mm Y-axis travel: 1,000 mm Z-axis travel: 630 mm Feed rate X-axis: 70 m/min Feed rate Y-axis: 40 m/min Feed rate Z-axis: 40 m/min Swivel angle A-axis: ±110°, freely programmable in 0.1° increments Swivel angle C-axis: ±182°, freely programmable in 0.1° increments Spindle speed: max. 24,000 rpm Spindle power: 15 kW S1 Maximum milling cutter diameter: 100 mm Maximum disc milling cutter diameter: 100 mm Maximum saw blade diameter: 400 mm Tool holder: HSK-63F MACHINE DETAILS Compressed air connection: 7 bar Electrical connection: 400 V, 3~, 50 Hz, 80 A Air consumption: approx. 200 l/min with misting EQUIPMENT Machining operations: milling, drilling, tapping, thread milling, notching, and sawing with stationary profile bar 6-sided machining: front optional, underside possible Gbsdpfx Asycul Ssciet Profile protection: machining with stationary profile bar Robust, low-wear direct drives on all axes Axes: 5-axis CNC control for complex 3D machining Display: 15-inch colour monitor Interfaces: USB ports, network connection 2-layer machining for pendulum operation Associated tooling (HSK tool holders) Two circular saws for aluminium Note: Documentation for disassembly of the machine is included.

Condition: excellent (used), Year of construction: 2001, Technical specifications: 5-axis machine: X, Y, Z, C, A Travel ranges (X/Y/Z): 500 / 450 / 400 mm Travel range A-axis: +108 / -5° Travel range C-axis: 360° CNC control: HEIDENHAIN Table diameter: 500 mm Table adjustable in degrees Maximum workpiece weight: 200 kg Number of positions in the tool changer: 30 Spindle speed: 20 – 30,000 rpm Motor power: 15 kW Dimensions (length x width x height): approx. 3700 x 2850 x 2800 mm Machine weight: approx. 5.8 tons Additional equipment: Chip conveyor Various tools Gsdjzl S Uzspfx Acijbt Condition: Very good condition, little used Operating hours: 2,700 Machine is still in operation The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 1500050285, travel distance X-axis: 7,800 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 630 mm, spindle speed (max.): 24,000 rpm, number of slots in tool magazine: 14, Submitting a bid obligates the buyer to collect the item on time on 23.12.2025! TECHNICAL DETAILS Godexx Uf Njpfx Acijbt Travel X-axis: 7,800 mm Travel Y-axis: 1,000 mm Travel Z-axis: 630 mm Rapid traverse X-axis: 70 m/min Rapid traverse Y-axis: 40 m/min Rapid traverse Z-axis: 40 m/min Max. workpiece length: 7,300 mm Max. spindle speed: 24,000 rpm Spindle motor power: 15,000 W Number of spindles: 1 Number of tool magazine slots: 14 Tool diameter: 100 mm MACHINE DETAILS Input voltage: 400 V Type of input current: Alternating current (AC) EQUIPMENT Documentation/manual included Magazine can be equipped with nine standard tools, five special tools, and one saw blade Ten clamping devices Two separate work areas for pendulum operation 15" color display Floppy disk drive DOS operating system

Condition: used, Year of construction: 2009, machine/vehicle number: V445C3-00236, Zoller Venturion 450 Precise measurement regardless of operator High degree of automation with CNC axes, autofocus, and rotary encoder Power-operated and universal tool clamping High-precision “ace” spindle clamps tools at the push of a button ZOLLER image processing “pilot 4.0” and large 24" monitor Industrial high-resolution camera Next to the CNC machine, in the workshop, in manufacturing cells Gsdpfxsy D D T Ae Aciebt User-friendly

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 4,200 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 115 mm, spindle motor power: 30,000 W, overall weight: 6,850 kg, controller manufacturer: OKUMA, controller model: OSP-P300LA, number of axes: 5, This 3-axis Okuma LB 3000 EX II was manufactured in 2022, featuring a robust horizontal turning capability. It includes an Iemca KID 80 bar feeder, a 250 mm SMW chuck, and a 170 mm Kitagawa chuck. With a main spindle motor power of 22 kW and rotational speeds up to 6000 rpm, it ensures efficient turning operations. If you are looking to get high-quality turning capabilities consider the Okuma LB 3000 EX II machine we have for sale. Contact us for more information. • Distance between spindle noses: 1085 mm • Maximum turning diameter: 340 mm • Bar capacity through main spindle draw tube: 80 mm • Sub spindle bore: 63 mm • Bar capacity through sub spindle draw tube: 52 mm • Rotational speed of driven tools: 45–6000 rpm • Control: Okuma OSP P300L (OSP Suite), 15" screen • Configuration: Main spindle (left) + sub-spindle (right), Y-axis, turret with driven tools (radial tool mounting) • Max turning diameter: 340 mm • Spindle speeds: • Left (main): 42–4,200 rpm • Right (sub): 50–6,000 rpm • Spindle motors: • Left (main): PREX 30/22 kW Gbedpfx Acsx D Rvnsijt • Right (sub): PREX 11/7.5 kW • Special main spindle (“Big Bore” option): Ø91 mm, nose JIS A2-8, 42–4,200 rpm, PREX 30/22 kW, max torque 700 Nm • Control/monitoring functions: • Spindle orientation • Cutting load monitoring (“Load Monitor”) selectable for all axes and spindles • One-Touch IGF M-E conversational programming • Tool life monitoring: by workpiece count, by cutting engagement time, by cutting load; automatic sister-tool change or stop/alarm if no replacement • Machine options: Additional flushing for left slideway covers Additional equipment • 250 mm SMW chuck on the main spindle • 170 mm Kitagawa chuck on the sub spindle • 6 sets of soft jaws • 4 straight driven tool holders • 4 angled driven tool holders • 2 double turning tool holders • 4 boring bar holders • 8 standard turning tool holders • 8 straight ER holders with about 30 ER collets • Workholding (chucks) • SMW‑Autoblok BBD250‑77 / A8, hydraulic 3‑jaw chuck • Includes: 1 set soft top jaws, hydraulic cylinder VN170‑77, drawtube ID 72 with cylinder flange • Max speed: 4,000 rpm; bar capacity: Ø72 mm • Kitagawa B206 (Ø170 mm), hydraulic 3‑jaw chuck • Includes: 1 set soft top jaws, hydraulic cylinder SR1146, drawtube/cylinder flange, ejector • Max speed: 6,000 rpm • Part handling • Part catcher, swing-bucket type, Ø80 × L150 mm, max 5.8 kg • Chip management • Cromar chip conveyor for LB3000 EX II C1000, slat type, right-hand discharge • Bar feeding and interfaces • Bar feeder interface (OSP P300L) • IEMCA KID 80+ bar feeder (SX – Left) for Okuma LB3000 EX II • Includes: 7" touchscreen HMI, mechanical/electrical interface kit, additional light kit, roller guide kit for round/hex bars, spindle extension, bar pusher D=26 mm, bar pusher D=15 mm, paper manuals • Accessories: Floor frame for longitudinal movement in Z; spindle liner/reduction tube Technical Specification Counter Spindle Yes Driven Tools No

Condition: good (used), Year of construction: 2004, functionality: fully functional, cutting length (max.): 100,000 mm, feed length X-axis: 5,050 mm, saw blade diameter: 550 mm, type of input current: three-phase, saw blade speed: 2,800 rpm, input voltage: 380 V, air pressure: 6 bar, overall weight: 1,800 kg, The Twin Electra 550 is a dual miter saw with 3 axes and an automatically adjustable saw head on linear guides. Electronic control of all miter angles via a brushless motor, from 45° (inward) to 22°30’ (outward), with a precision of 240 positions per degree. Connection to window construction software (orgadata / Unilink / Wictop... etc.) is possible. Gsdpjzav U Nsfx Aciebt The machine features the following equipment: - Industrial PC - Additional clamping device on the roller conveyor - Automatic profile support - Shortcut function - Overlength cutting - Crosscut - Automatic cutting - Connection to external software possible (Orgadata, Unilink, Wiktop... etc.)

Condition: ready for operation (used), Year of construction: 2016, number of axes: 3, This 3-axis DMG MORI CMX 600 V was manufactured in 2016, featuring a 4th axis rotary table preparation, Siemens 840D control, and SK40 spindle. It includes advanced probing systems for both workpiece and tools, ensuring precision. Ideal for those looking to enhance their machining capabilities with reliable equipment. Contact us for more information about this machine. • Basic machine with main‑drive options • Preparation for rotary table (4th axis), EA 510L (rotary table itself not included) • Safety measuring system for X/Y/Z axes • Signal lamp, 4‑colour standard • PROGRESSLine & Planolight • Signs language: Hungarian • Screen text: German/Hungarian • Documentation: Doc 1 & Doc 2 (HU); Electrical circuit diagram (DE) • Misc.: Preparation for machine handover; internal rebuild unit ID 34; inspection & preparation noted Additional equipment • Chip conveyor with ICS (internal coolant) + chip tank (Production Package 1) • Workpiece probing system TS 649 (on table) • Tool probing system TT140 • Lamp inside tool magazine Gsdpfjx D Di Uox Acisbt • Tool loading through magazine door • Platform/foil machine base • NetService remote service (ID 2632226)