Cold saw

EISELE VMS II

Condition: used, Max. saw blade diameter: 350 mm Manual saw feed Ledpfx Aoxn Ivgea Eoak 2 sawing speeds Coolant lubrication

Condition: used, Seriennummer: 0419 Lsdpewm Rrdjfx Aa Eoak

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Cold Circular Saw Eisele VMS-II-S, Year 1987, Very Good Condition from University >> Manufacturer: EISELE, Model VMS II S >> Vertical cold circular saw Lasdpfxjxx T Nms Aa Ejk >> 2 speeds: 17/34 rpm >> Year of manufacture: 1987 >> Working range: Ø 80-102 mm / Flat 160x75/82 mm >> Drive power: 1.4/1.9 kW >> Saw blade diameter possible: 275 - 315 mm >> Space requirements approx. 80 x 90 x 180 cm >> Weight approx. 400 kg >> Manual lowering of the saw carriage with adjustable hand lever >> Manual, laterally adjustable material vice >> Coolant system with electric coolant pump integrated in machine base About the machine: A well-maintained Eisele VMS-II cold circular saw is being offered. The machine is in original condition and fully functional. It comes from a university and has seen little use. You are welcome to test and inspect the saw under power at our facility.

Condition: used, Mitre Cold Circular Saw EISELE Type VMS-II-S Model No. 421 Serial No. V 2295 Year of manufacture: 1984 Cutting capacity at 90° (round): Ø 120 mm Cutting capacity at 90° (rectangular): 120 x 90 mm Saw blade diameter max.: 350 mm Blade speed: 40 - 80 rpm, 2-step Mitre cuts: 45° to the left, 90°, and continuously adjustable up to 30° (60°) to the right Motor power: 1.4 and 1.9 kW Power supply: 380 Volt, 50 Hz - Two cutting speed stages via two motor speeds - Manual saw carriage lowering via adjustable lever - Manual material vice, side-adjustable - Coolant system with electric coolant pump integrated in machine base - Equipped with one saw blade, approx. Ø 350 mm - Outfeed roller conveyor 750 mm with simple length stop up to 1000 mm, fixed to the machine base Laedexk Uunjpfx Aa Eok - Infeed roller conveyor 2350 mm with simple length stop up to 2500 mm, free-standing - Usable roller width: 180 mm Space requirement of base machine with outfeed roller conveyor (L x W x H): 1400 x 850 x 1700 mm Base machine weight: approx. 450 kg Infeed roller conveyor weight: approx. 140 kg Good condition

Condition: used, Year of construction: 2013, travel -x axis 800 mm travel -y axis 520 mm travel -z axis 550 mm control HEIDENHAIN - iTNC 530 number of spindle speeds 10.000 U/min numbers of positions in the tool changer 24 520 x 950 (B x L) mm Milling machining centers - vertical | POSmill - C 800 Kompakt equipped with 24- way tool changer and ITC. Laedpjv Td Iaefx Aa Eok The machine is in a well-maintained condition. For further technical details, please refer to the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C800 | C-800 | C800Kompakt | C -800-Kompakt

Condition: not inspected (used), Eisele VMS II-S-PV automatic saw with automatic feeder and piece counter Roller conveyors left and right Metal band saw, metal circular saw Laodpfx Aowf Af Tea Eok

Condition: good (used), Year of construction: 1985, Eisele VMS-II-S-PV metal circular saw Ledpfod Hbnfsx Aa Eeak Type No. 421 Maschnr. 01224 380V Built in 1985 50 Hz

Year of construction: 1991, condition: good (used), machine/vehicle number: 900 1241, disk of circular saw-Ø: 275 mm Ledpem Twgwefx Aa Eeak cutting area at 90° round: 90 mm cutting area at 90° square: 75 x 75 mm cutting area in mitre at 45° square: 75 x 75 mm disk rotations: 40/80 upm engine: 380 V, 1/1/2 kW space needed: 700 x 600 x 1580 mm weight: ca. 180 kg

Condition: excellent (used), Year of construction: 2004, Machine type: - Kondia B640 - Year of manufacture 2004 Control system: - Heidenhain iTNC 530 - Electronic handwheel Tool measurement: - Tool Eye - 3D probe Tool changer: - 22 magazine pockets Travel paths: - X - 600, Y - 400, Z - 510 mm Main spindle: - Max. 12,000 rpm (new main spindle in 2020) - Tool holder BT 40 Table: - Clamping surface 800 x 400 mm Coolant system: - Through-spindle coolant 20 bar - External coolant supply Lsdpew H N R Eofx Aa Eoak - Spindle cooling Accessories: - Chip conveyor - Various tool holders - Various clamping studs - Machine documentation Availability: - Immediately

Condition: good (used), Year of construction: 2014, Traverses; 800 x 460 x 520mm, Table size 1000 x 460mm, Table load 600 kgs, Spindle speed 8,000 rpm, Spindle power 11/15Kw, spindle taper BT40, 24 station ATC , Lasdpfeu Ehi Asx Aa Ejk Fanuc I series, coolant, swarf conveyor.