Notching machine

Edel 910E

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the Kfsdsfg E Hpspfx Aa Eja The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: new, Year of construction: 2025, working width: 1,250 mm, bending angle (max.): 160 °, sheet thickness steel (max.): 1 mm, sheet thickness aluminum (max.): 12 mm, sheet thickness copper (max.): 12 mm, overall weight: 100 kg, total length: 1,500 mm, Timely delivery, trustworthy equipment ! Manual bending machine folding bench sheet metal bending machine with segments Prod Masz is a guarantee of reliability. Triple segmented bender SGR-1250/1.0mm Technical specifications: - maximum working width; 1250mm Ksdpfscgmf Rex Aa Eofa - Bending angle max. 160 degrees - Bending beam 15mm - max. sheet thickness (steel) 1.0mm, aluminum 1.2mm - Weight 105kg - segment jaw width 30,40,50,60,70 and 100mm - three cheeks are equipped with segment jaws (full segmentation) -degree scale - passage 55mm Total length: 1.6m Height: 45cm Price: 2,950 euros Delivery date: every week We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 19% of VAT.

Condition: used, machine/vehicle number: 632/6, pressure:30 t no. of strokes:100-600 Hub/min sheet width:120 mm table-size:480 x 450 mm Bruderer Double Roll Precision Feed:links Kfsdpocxxycofx Aa Eea stroke adjustable from - to:16-40 mm distance between columns:330 x 300 mm dimensions of the machine ca.:2,10 x 1,65 x 0,75 m with air cooler, piece counter, separate electrical cabinet, air clutch, BRUDERER precision double-roll feeder on left side, machine technically, mechanically and optically as new

Condition: new, sheet width 1050 mm plate thickness 1,5 mm distance between columns -- mm weight of the machine ca. 280 kg Kedoudc Izjpfx Aa Eefa dimensions of the machine ca. 1300 x 750 x 1515 mm Manual folding machine FSBM 1020-20 HSG / 3770103 - The workpiece is clamped using a foot pedal, so both hands remain free for material feed - Different tool variants available E, S2, HS2 and HSG - The strong auxiliary cylinder makes bending easier - Wide clearance between the upper and lower beam of up to 25 mm - Self-lubricating slide bearings - Clamping pressure of the upper beam can be easily adjusted using handy knurled screws - Adjustment of the material thickness by means of a knurled screw - Adjustable stop for bending angle Equipment details: FSBM 1020-20 HSG - With segmented goat foot tools, segmented bending bar and segmented bed pad - Segments have a hardness of HRC24-26 VA steel 1.2 mm Aluminum 2.4 mm

Condition: new, pressure 25 t throat 200 mm stroke 4 - 80 mm table surface area 520 x 400 mm no. of strokes 160 Hub/min ram surface 160 x 160 mm ram adjustment 40 mm ram hole 32 H7 mm Kjdjb U Hwpjpfx Aa Eofa hole in the table 200 x 150 mm clamping plate 500 x 380 x 60 mm total power requirement 2,7 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 1,3 x 1,0 x 1,85 m

Condition: new, plate thickness 1,6 mm 4 t Kfjdpoftd Uajfx Aa Eja blade length 156 mm angle adjustable from - to fest Grad table surface area 450m x 305 mm total power requirement Handbetrieb kW weight of the machine ca. 95 Kg Dimensions (LxWxH) 530 x 380 x 480 mm

Condition: new, pressure 25 t throat 200 mm Kfjdpfx Ajb U Hwnsa Eoa stroke 4 - 80 mm table-size 520 x 400 mm no. of strokes 160 Hub/min work capacity during endurance run 1370 Nm force 2740 Einzelhub adjustment of stroke 4 - 80 mm ram adjustment 40 mm ram surface 160 x 160 mm hole in the table 200 x 150 mm clamping plate 500 x 380 x 60 mm hole in the table 80 mm weight of the machine ca. 1,9 t

Condition: new, pressure 40 t throat 225 mm stroke 8-84 mm Table dimensions 580 x 450 mm ram adjustment 55 mm no. of strokes 130 Hub/min ram surface 185 x 180 mm ram hole 40 H7 mm hole in the table 210 x 170 mm T-slots 22 clamping plate 570 x 450 x 65 mm total power requirement 3,5 kW Kedpsb U Hwmofx Aa Ejfa weight of the machine ca. 2,7 t dimensions of the machine ca. 1,4 x 1,1 x 2,1 m

Condition: ready for operation (used), De uitrusting bestaat uit: 1 - decoilertoren met 4 decoilers (AG 3000 a) capaciteit per decoiler: 3 ton armlengte: 1350 mm maximale snelheid: 25 m/min frequentiegestuurd 2 - spoelselector (MT-4 1250) min: 150 mm maximale snelheid: 25 m/min frequentiegestuurd 3 - richtunit (RM-4 1250) min: 150 mm maximale snelheid: 25 m/min frequentiegestuurd 4 - snij-eenheid (TS 1250 + KST-2) min: 150 mm maximale snelheid: 25 m/min frequentiegestuurd 5 - Schechtl-schaar voor op maat knippen met Siemens Touch CNC-besturing 1250 x 2 mm Kjdpfxjxqh Sas Aa Ejfa

Condition: new, Year of construction: 2024, Folding length 3020 mm Pressing force 135 t Infeed speed 140 mm/s Bending speed max. 10 mm/s Retraction speed 130 mm/s Stroke 320 mm Installation height 550 mm Projection 450 mm X-travel 750mm X- speed 300mm/sec. R- travel 250 R- speed 100mm/sec. free column passage 2555 mm Machine length 3730 mm Machine width 2300 mm total height 2850 mm Machine table height 900 mm Motor power 15 kW Oil tank 190 l Machine weight 9500 kg (technical data may vary depending on equipment) Standard equipment: 3 CNC axes (Y1, Y2, X) Double-guided press beam, stable and precise Kfedpjq Rdtqjfx Aa Esa Stable back gauge, double-guided Manual stop fingers double-guided on linear guide Sliding front arms with height adjustment Side and rear protective covers Lower die adapter rail 60 mm Man. Top tool clamping system (Promecam system) Manual crowning Foot switch with emergency stop switch 380 V, 50-60 Hz, 3 phases LED lighting Recommended options: Dener control unit DA 66T Fiessler AKAS 2M laser finger guard + FPSC Safety PLC (manual) X-R axis with servo motors CNC crowning for high bending accuracy 2 additional stop fingers - Further processing lengths and thicknesses are available with corresponding accessories! -