Eccentric Press - Single Column

AMBOLD PEEV 40.3

Condition: used, Year of construction: 2008, machine/vehicle number: 0-411-49-1873, Technical data: Crsdpfx Aeyh Hwueixef - Manufacturer: Bütfering - Type: Optimat SGO 211/RC - Number of grinding units: 2 - Year of manufacture: 2008 - Working width: 1.100 mm - Grinding belt width: 1.120 mm - Grinding belt length: 1.900 mm - Workpiece thickness: 3-160 mm - Feed speed: 2,5-13 m/min. - Table height adjustment Standard equipment: - Automatic workpiece thickness adjustment - Stepless feed speed via requency converter. - 125 grinding programs can be stored - Wear-free braking system 1. Grinding unit (R) - Calibration roller - Profiled steel contact roller - Diameter 160 mm - Drive motor: 15 kW 2nd grinding unit (C) - Combination unit with roller and grinding shoe - Rubberized contact roller 65 Shore - Contact roller diameter 160 mm - Electronic link pressure bar with segment width 35 mm. - Belt speed: 12 and 21 m/s - Tolerance compensation up to 1 mm - Suitable for veneered surfaces and solid wood. - Drive motor: 11 kW - Total connected load: approx. 28 kW - Operating voltage: 400 V / 50 Hz. - Compressed air consumption at 6 bar, 20 L/min. - Belt blow-off device per pressure surge 440 L/min. - Extraction volume: approx. 2,880 m3/h/ at 20 m/s - Extraction connection: Dedusting: 1 x Ø 160 mm (grinding unit, roller) 1 x Ø 160 mm (grinding unit, shoe) Dimensions: - Length: 1,700 mm - Width: 1,850 mm - Height: 2,100 mm - Location: not in stock - Available from April 2026

Condition: used, Year of construction: 1980, grinding length 500 mm grinding width 200 mm workpiece height 290 mm Machine from the German Federal Institute of Physics and Metrology - geometrically revised - electrics tested, fully functional, relevant parts replaced - all wear parts replaced - colour light grey, colour condition good Equipment: - electro magnet 500x200mm - grinding spindle overhauled 2-axis display for Y and Z axes Automatic delivery for Y and Z axes Y-axis with zero shutdown Manual hand dresser Stepless speed for grinding wheel V-constant via disc wear Paper band filter system, used Max. height with 250 disc diameter 290mm max. grinding area 600x250mm max. load incl. magnet 100kg Cjdpfowb Hygex Aixsrf Warranty: 1 year on geometry and electronics, Germany-wide Delivery: ex works Shipping time: immediately Payment: before pickup Acceptance at our premises Shipping according to your specifications

Condition: used, mileage: 227,566 km, power: 130 kW (176.75 HP), first registration: 05/2012, fuel type: diesel, empty load weight: 6,390 kg, maximum load weight: 6,110 kg, overall weight: 12,500 kg, axle configuration: 4x4, wheelbase: 3,050 mm, fuel: diesel, driver cabin: other, gearing type: other, emission class: euro5, suspension: other, number of seats: 2, total length: 5,100 mm, loading space length: 2,650 mm, loading space width: 2,000 mm, loading space height: 4,000 mm, Year of construction: 2012, operating hours: 16,641 h, construction height: 3,360 mm, Equipment: air conditioning, all wheel drive, hydraulics, onboard computer, trailer coupling, The Unimog U400 405/12 impresses with its versatility and robustness and is ideal for use in agriculture and construction. Powered by a powerful 4,249 cc diesel engine with 177 hp and the Euro 5 emissions class, it meets modern environmental standards. With a total mileage of 227,566 km and 16,641 operating hours, it is in good shape. The Unimog has a trailer hitch, air conditioning, a front PTO and municipal hydraulics, which support flexible attachment options. The vehicle was built in 2012 and has only been used by one owner before. With its compact dimensions - 3,360 mm in height, 2,360 mm in width and 5,100 mm in length - it still offers an impressive payload with a permissible total weight of 12,500 kg. The Unimog has a green environmental sticker, which allows it to be used in urban emission zones. Operating hours: 16,641 hours Only sold to businesses (agriculture, freelancers, small and large businesses) or for export. Subject to errors and prior sale. Csdpfx Aijr Uzthoxsrf

Condition: new, Year of construction: 2024, pressing force: 175 t, working width: 3,050 mm, A high-performance DURMA press brake type AD-S 30175 is for sale. With its extensive standard equipment and selected options, it is ideally equipped for the demanding tasks involved in metal processing. Standard equipment: Capacity and size: 3050mm x 175 tons Installation height: 530mm Projection: 450mm Stroke: 265mm Axis control: Precise control with 4 axes. Safety systems: Manuel F. AKAS FPSC safety system, CE F.AKAS BVLT light barriers and safety cages provide maximum protection. Backgauge: Servo motor backgauge & linear guide & ball screw system for maximum precision. Tool clamping system: European standard for fast and safe tool changes. Front arms: Movable, supports the handling of different workpiece sizes. Selected options: Control unit upgrade: SKY 22 - 3D, for even more detailed bending operations and 3D visualization. Crowning: Motorized adjustment, for even more precise bending results. Backgauge: Extended with motorized X, R-axis backgauge (X=650mm), increases flexibility and precision. Quick clamping: Manual quick clamping for more efficient tool changes. Csdpfxjrx Rkuj Aixorf This DURMA press brake is ready to support your production with its advanced technology and reliable performance. It is the ideal choice for companies that value precision, efficiency and safety. For more information or if you are interested, please contact us. Don't miss the chance to expand your production capacity with this high-quality machine.

Condition: new, sheet width 1550 mm plate thickness 6.5 mm pre-bending 4.5 mm diameter of upper rolls 150 mm side roll diameter 130 mm diameter of lower rolls 150 mm distance max. OW zu UW 20,0 mm total power requirement 2.2 + 1.5 kW weight of the machine ca. 2370 kg. range L-W-H 3300 x 1150 x 1110 mm Exhibition machine - NEW not yet in use (!!) Special price on request Equipment: - electro-hydraulic 4-roller round bending machine * with driven top roller + bottom roller * stable welded construction - Area of application: * light to heavy sheet metal processing (steel/aluminum/stainless steel) - electro-hydraulic adjustment of the bottom + side rollers - linear guidance of the side rollers - top roller driven by robust electric motor + planetary gear Cjdoxabkbepfx Aixjrf - freely movable, separate control panel - hardened rollers SAE 1050 (CK 45) + crowning - conical bending device - 3x axis digital display for precise roller positions - electro-hydraulic folding bearing - operating instructions (PDF)

Condition: ready for operation (used), Year of construction: 1998, pressure 85.0 t chamfer lenght 2050 mm distance between columns 1750 mm column arm 410 mm stroke 365 mm dayligth 535 mm ajustment speed 200 mm/sec working feed 1.0 - 10.0 mm/sec return speed 135 mm/sec back stop - adjustable max. 600 mm table width 120 mm work height max. 1050 mm Number of working hours 28.500 h oil volume 200 l operating pressure 340 bar total power requirement 14.0 kVA weight of the machine ca. 9050 kg range L-W-H 2680 x 2100 x 2885 mm with increased installation height / piston stroke very well maintained condition (!!) with only approx. 28.500 operating hours - in checked condition - machine video - ?v=ZuwyPKJSYLw Equipment: - CNC electro-hydraulic press brake - including DELEM CNC control * swiveling control panel at the front left - CNC controlled axes: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning Crjdpfx Aiexaa Urexef - CNC electro-motorized back stop (X axis) - CNC electro-motorized height adjustment of the back stop (R axis) - CNC electro-motorized adjustment of the stop fingers (Z axes) - CNC pneumatic die displacement (I axis) - CNC motorized table crowning - WILA electro-hydraulic upper tool clamping - WILA electro-hydraulic Lower tool clamp - 1x freely movable 2-hand / foot control - 2x front, stable support arms including "sliding system" - side protective device (swinging doors) - rear protective device (swinging doors) - bending tool storage cabinet (right front, side) - original operating instructions + circuit diagram etc. further technical data: - feed speed X axis .. 500 mm/sec. - feed speed R axis .. 300 mm/sec. - feed speed Z axis .. 1000 mm/sec. - travel range X axis .. max. 600 mm - travel range R axis .. max. 250 mm

Year of construction: 2018, condition: as good as new (ex-display), Welding rotary table KT 50 Crjdjd A Etyjpfx Aixsf Load capacity, horizontal: 50 kg, tilted: 25 kg Power supply: 220 V, 50 Hz Table diameter: 320 mm Table height: 400 mm, tilted to center: 300 mm Length: 650 mm, width: 650 mm Tilting range, continuously adjustable via crank drive motor: 0 – 90° Speed: 1.7 – 15 rpm Includes foot-operated remote control

Condition: new, Comparable to Durma, Baykal, Ermaksan, etc. Bending length: 3,020 mm Pressing force: 135 t Approach speed: 140 mm/s Bending speed max.: 10 mm/s Return speed: 130 mm/s Stroke: 320 mm Installation height: 550 mm Throat depth: 450 mm X-axis travel: 750 mm X-axis speed: 300 mm/sec R-axis travel: 250 mm R-axis speed: 100 mm/sec Clear distance between frames: 2,555 mm Machine length: 3,730 mm Machine width: 2,300 mm Total height: 2,850 mm Table height: 900 mm Motor power: 15 kW Oil tank: 190 l Machine weight: 9,500 kg (Technical data may vary depending on equipment) Standard features: - 3 CNC axes (Y1, Y2, X) - Double-guided, stable, and precise ram Crjdoq Rdtqjpfx Aixof - Robust, double-guided backgauge - Manually adjustable, double-guided stop fingers on linear guides - Adjustable front support arms with height adjustment - Lateral and rear safety covers - Lower die adapter rail, 60 mm - Manual upper tool clamping system (Promecam system) - Manual crowning - Foot switch with emergency stop - 380 V, 50-60 Hz, 3-phase - LED lighting Recommended options: - Dener DA 66T control - Fiessler AKAS 2M laser finger protection - FPSC Safety PLC (manual) - X and R axes with servomotors - CNC crowning for high bending accuracy - 2 additional stop fingers - Other working lengths and thicknesses available with suitable accessories! -

Condition: excellent (used), Year of construction: 2006, Technical data: - working width 1350mm - pneumatic oscillation - vacuum table - Stand alone machine ( Table raise/fall ) 1 Combi unit: - motor power 18,5kW - steel calibrating roller - stepless adjustment of the belt speed - sectional pad (52 sections of 26mm each) 2 Combi unit: - sectional pad (52 sections of 26mm each) - motor power 7,5kW - stepless adjustment of band speed - brush on the exit of the material - stepless regulation of feed speed - pneumatic cleaning of belts Codjvdtxiepfx Aixjrf

Condition: like new (used), Year of construction: 2024, Used double-sided cantilever racking: hot-dip galvanized bolted system Scope of supply: 4 double-sided racking uprights, height 4,160 mm with base section 1,200 mm 24 cantilever arms with 1,200 mm depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height-adjustable in 100 mm increments - Per upright, 6 screwable cantilever arms and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels on top of each other per upright side - Including longitudinal and diagonal bracing for 1,300 mm distance - Racking length 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time Crjdpfx Aish Ek Dasxef - On-site collection possible Our cantilever racking is produced exclusively in Germany. We offer reliable freight services with prior notification before delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The subsoil must be made of concrete, level and suitable for dowels, and must be able to absorb the acting loads. The customer must check and ensure the ground conditions, load-bearing capacity, and any required official permits. The racking uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational health and safety association, it is recommended that the racking uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.