Tube & pipe fiber laser cutting machine

Dynamic Power Laser M Series - Manual Beladung 6,5m /2,5 m

Condition: new, Year of construction: 2023, Cast resin, epoxy dry distribution 3 phase transformer manufactured by TESAR Italy, 1 pc 1000kVA, 6000 ( ± 2 x 2,5 %) /400V; Dyn1/Dyn5/Dyn11, IP00, year of production 2023, ecodesign 2, project documentation and rutine protocol, manuals, unpacked, 2 years warranty. Gtodpfxel Tm Uve Admot

Condition: good (used), Year of construction: 2018, Manufacturer: INDUCTAFLEX Type: AL-3e Control system: ACCURATE touch screen Year of construction: 2018 3 rolls driven servo Torq each roller 3500 nM Electrically support rolls Intelligent software : Ellipse program U Bend shapes control of tangents Auto section detector Specifications Metric US Standard Horizontal and Vertical Horizontal Axis Ø Gtodpfx Aovd Dftodmot 105 mm Number of rollers 3 Stroke X axis 0 - 400 mm Dimensions (estimate) length 4500 mm width 3200 mm height 2700 mm weight 3300 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Year of construction: 2016, condition: excellent (used), Voortman V808 CNC Beam Coping Line – Year 2016 (REF: STK‐1549) Gedpfslff H Ejx Admett Coping Robot | Automatic in‐feed & out‐feed | 1.25m Sections | Roller Feed Kjellberg SmartFocus 300A Plasma Unit | Donaldson Extraction System

Condition: reconditioned (used), functionality: fully functional, year of last overhaul: 2025, DGUV certified until: 12/2026, overall weight: 25 kg, input frequency: 50 Hz, empty load weight: 25 kg, Mixing Maschine Rego SM 2,3 and 4 Gjdpfx Adjdlxgtemjtt

Condition: used, functionality: fully functional, load capacity: 18,000 kg, lifting height: 11,900 mm, fuel type: electric, mast type: telescopic, construction height: 1,990 mm, empty load weight: 21,650 kg, total length: 5,540 mm, drive type: Elektro, construction width: 2,000 mm, Pick & Carry Crane Mast type: Telescopic Technical condition: good Gtodpfot Dd Uwex Admjt Front tires type: Non Marking Rear tires Type: Non Marking Remote control

Condition: used, Tube bending machine, mandrel bending machine, bending machine for tubes and profiles Tube bending unit with SIEMENS servo motor and planetary gearbox Year of construction: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Bending angle: max. 200° - last used for round tube Ø 15.4 x 0.8 mm, R60 mm - Bending tools and bending jaws interchangeable - Bending tool drive via AC servo motor and Alpha spur gear, planetary gearbox - 2-part bending tool opens and closes via hydraulic stroke movement - MERKLE hydraulic round block cylinder, item 014445 for hydraulic tool opening - Pneumatic height adjustment of the bending jaw via Festo compressed air cylinder - without electrical control - without hydraulic unit Godpfxed E A I Io Admett Dimensions L/W/H 760 x 400 x 150 mm weight: approx. 60 kg good condition Removed from a functional special machine, tested before removal. Drive: Brushless permanent magnet servo motor SIEMENS Typ:1FK6061-7AF71-1EG0 Nominal torque = MO: 6.4 Nm Rated current = Io: 6.1 A Speed = n. max.: 5500 rpm - Brushless permanent magnet servo motor SIEMENS ----- 5 pieces available in right-hand version. 5 pieces available in left-hand version. The price quoted refers to 1 bending unit with servo motor. If required, we also sell individual assemblies of the bending unit. We also offer the electrical components for controlling the servo motor. We also offer hydraulic units.

Condition: good (used), Year of construction: 2000, operating hours: 10,000 h, functionality: fully functional, turning length: 1,105 mm, turning diameter: 610 mm, spindle speed (max.): 3,500 rpm, spindle bore: 70 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 210 mm, travel distance Z-axis: 1,137 mm, mount diameter: 63 mm, rotational speed (max.): 6,000 rpm, type of input current: AC, Equipment: rotational speed infinitely variable, The machine is in good condition. Major maintenance work in recent years: 30.04.2020: Milling spindle overhauled CHF 35,000 16.07.2021: Software update (Wenk AG) CHF 1,600 20.06.2022: Central lubrication pump replaced CHF 400 (All prices are in CHF) Known issues: - Error message during startup - Coolant from internal cooling leaks out at the rear of the milling spindle - Overload message when the machine is cold and running at 100% rapid traverse - Over 150 different tool holders included - Spare magazine sleeves for tool magazine - Spare limit switches for tool changer position monitoring - 2 x 3-jaw chuck diameter 250 mm (mounted for inspection) - 1 x 3-jaw chuck diameter 250 mm - 1 x 3-jaw chuck diameter 300 mm - 1 x 4-jaw chuck diameter 400 mm - 2 sets of hard jaws for external clamping, short version Gtjdpoxp Hmaofx Admjt - 1 set of hard jaws for external clamping, long version - Various sets of used soft jaws - Spare filters for the high-pressure system (Kowap) (5 units in stock; approx. 2 units available by delivery – 1 filter approx. CHF 20-25) - Coolant cleaning system or oil separator (custom built) - Storage cabinet customized to fit the tool magazine for KM63 holders, numbered for 80 positions - Specific clamping equipment suited for the KM63 holders, allowing direct indexable insert clamping - Iscar disc milling cutter suitable for a D160 mm holder, 4 mm width - Gear milling cutter suitable for a holder (custom built – for soft jaws, pitch = 1.5 mm) - Cleaning/deburring brush suitable for a holder We are also happy to provide leasing and financing offers for the machine. A viewing appointment can be arranged upon request.

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 5831, travel distance X-axis: 7,500 mm, travel distance Y-axis: 6,200 mm, travel distance Z-axis: 2,000 mm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, rapid traverse Z-axis: 60 m/min, feed length X-axis: 7,500 mm, feed length Y-axis: 6,200 mm, feed length Z-axis: 2,000 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 80 m/min, feed rate Z-axis: 60 m/min, nominal power (apparent): 150 kVA, torque: 45 Nm, controller manufacturer: Fanuc, workpiece length (max.): 7,500 mm, workpiece width (max.): 6,200 mm, workpiece height (max.): 2,000 mm, workpiece diameter (max.): 6,200 mm, workpiece weight (max.): 50,000 kg, total height: 5,500 mm, total length: 12,800 mm, total width: 8,900 mm, table width: 6,200 mm, table length: 7,500 mm, table load: 50,000 kg, spindle speed (min.): 24,000 rpm, spindle speed (max.): 28,000 rpm, coolant supply: 8 bar, spindle motor power: 28,000 W, number of spindles: 1, number of slots in tool magazine: 32, input voltage: 380 V, type of input current: AC, operating speed: 80,000 mm/s, Equipment: documentation/manual, rotational speed infinitely variable, Table Dimension 6,840 x 4,400mm. Axis Travel 'X'=7,500mm, 'Y'=6,200mm, 'Z'=2,000mm, 'B'=±110°, 'C'=±300°. Gedpfx Aju I Nzrodmett Rapid Traverse 'XY'=85m/min, 'Z'=45m/min, 'BC'=9,000°/min. Maximum Spindle Speed 24,000rpm (28 kW Motor). Spindle Taper HSK 63F. 16 x 2 Position Tool Racks. S/No. 5831 (2011).

Condition: new, The Sinus 400/1500 D, a top-tier model in the Conventional Horizontal Lathes category and part of the Engine Lathes product group, exemplifies robust engineering and innovative design. KNUTH has crafted this universal lathe with a sturdy one-piece cast machine bed, ensuring high accuracy and low-noise operation even at elevated cutting power. The lathe features a removable bridge allowing machining of large parts with diameters up to 1035 mm, alongside rapid feed capabilities across two axes for swift positioning. Additional highlights such as its manual multi-disc clutch, hardened guideways, and well-designed safety functions further enhance its performance and reliability in various machining applications. This Engine Lathe is equipped with essential accessories like a 3-axis position indicator and a comprehensive toolset for operator convenience. For those looking for a high-performance lathe capable of handling demanding tasks, the Sinus 400/1500 D is the optimal choice – request a quote today! Gsdpfx Aoq Rdp Aedmstt

Condition: new, Year of construction: 2024, pressure: 8 bar, Miter setting horizontally 15°- 90°15° infinitely variable saw motor 5.50 KW (400 volts) saw blade 600 mm traversing range rear stop 180 mm working height 940 to 1000 mm adjustable via feet 2 x suction nozzles (above in the hood and below) net weight 600 kg WxDxH 135x140x150 cm RAL 9007 gray aluminum rotary plate polished nickel steel Saw head with recirculating ball guides designed with high accuracy and long service life and high rigidity. Sawing material can be preloaded with low pressure when the hood is open. Hydropneumatic sheet feed Chip flow towards the extraction hood. Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system Othgf • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 230 mm Hxdcvds7y • Saw blade 600mm • Saw blade not included! Our NC pusher system ensures that your machining parts are positioned at the desired machining position on our UK 600 HA 90°. A gripper clamps the material, the NC control positions the material automatically. The tension and the sawing process are then triggered. The positions are previously programmed into the program control. Once the machine tool has completed your machining, it automatically moves to the next sawing position. Depending on the processing part, several parts can also be clamped on top of each other/next to each other and positioned at the same time. It is always possible for you to inspect the desired system in our production/demonstration hall. Gtjdpfxogwt S To Admjt Please do not hesitate to contact us.