Press brake
Durma AD-Servo 30175

Name: Durma AD-Servo 30175
Brand: Durma
Availability: InStock

Condition

New

Location

Sennwald

Machine data

Machine type:: Press brake

Manufacturer:: Durma

Model:: AD-Servo 30175

Condition:: new

Price & Location

Location:: Widdermoos 3, 9466 Sennwald, Schweiz

Call

Details about the offer

Listing ID:: A7134561

Update:: 10.09.2024

Description

Condition: New
Press force: 175 tons
Bending length: 3050 mm
Axes: Y1 / Y2 and X axis
Control system: Durma Sky 22
Rapid traverse rate Y-axis: 200 mm/s
Stroke: 265 mm
Distance between uprights: 2600 mm
Overhang in the side upright: 450 mm
Installation height: 530 mm
Drive concept: Servo-hydraulic, up to 72% energy saving
Working speed Y-axis: 10 mm/s
Retraction speed Y-axis: 500 mm/s
Back gauge travel X-axis: 650 mm
Back gauge speed X-axis: 500 mm/s
Back gauge speed R-axis: 350 mm/s
Back gauge travel R-axis: 250 mm
Table height: 900 mm
Table width: 104 mm
Motor power: 15 kW
Length: 4250 mm
Width: 1700 mm
Height: 2890 mm
Weight: 10900 kg

3 axes (Y1, Y2, X)
CNC CONTROL DT-15
- 2D graphic display 15″
Ledpfxoh H Dnbj Apmoad
- Intuitive touch screen operation (easy drawing of the bending contour with the finger)
- Direct programming of the bending angle
- User-friendly programming in dialog mode
- Graphical simulation of the bending process
- Automatic calculation of the blank length for sheet metal cutting
- Graphical product and tool memory
- Correction option
- Manual, semi-automatic and fully automatic operating mode
- Tonnage calculation/programming by the CNC
- Internal data storage
- USB ports for backup and program transfer
Servo-motor driven back gauge on linear guides and ball screws
Back gauge finger blocks on double linear guides
CNC-controlled crowning
Spacers for the upper tool clamping
Die holder for 60 mm dies
Laser protection device Fiessler AKAS mounted on the upper beam
Sheet metal support arms on linear guide
Side and rear protective grilles
Equipment according to CE regulations
Operating manual in GERMAN and ENGLISH
(Sample image)

Various options and equipment variants are possible.

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2020

9 listings online

Call

Send inquiry

Telephone & Fax

+41 81 74... show

These listings may also fit your interest.

Listing

Hydr. pressbrake HESSE by DURMA AD-Servo 30175

Austria

1,819 km

Hydr. pressbrake
HESSE by DURMAAD-Servo 30175

€106,178

Fixed price plus VAT

Call

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 106178 € 2006.76 € 175 to 3050 mm Y1 / Y2 / X / R Achse 265 mm 2600 mm 410 mm 530 mm hydraulisch 200 mm/s 10 mm/s 200 mm/s 650 mm 500 mm/s 250 mm 900 mm 104 mm 2 x 4 kW Ledpewirtbsfx Apmead 4250 mm 1700 mm 2750 mm 10900 kg 1 SERVO MOTOR AND PUMP PER CYLINDER Standard accessories: 4 axes (Y1, Y2,X and R) Color graphics control Delem DA 66 S - 2D graphical touch screen programming mode - 3D machine representation, in simulation and production - 24" high resolution color TFT - Delem Modusys compatibility (module scalability and adaptivity) - USB, peripheral interfacing - User specific application support within the control's multitasking environment - Sensor bending & correction interface - Profile-S2D offline software servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF THIS CONCEPT: - hydraulic works only while upper beam movement - low energy consumption - low noise level - high speed OPTIONAL EQUIPMENT (TIME OF DELIVERY WITH THESE OPTIONS 16 WEEKS): CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Further options as pneumatic or hydraulic tool clamping on request.

See details

Listing

Press brakes Durma AD-R 30175 2020 Durma AD-R 30175

Wijchen

961 km

Press brakes Durma AD-R 30175 2020
DurmaAD-R 30175

Call

Condition: used, Year of construction: 2020, operating hours: 2,018 h, total length: 4,000 mm, total width: 2,300 mm, total height: 2,850 mm, Colour: Grey Weight: 10.520 kg Price: On request - Year: 2020 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 73332015912 - Operating hours: 2018 - Drive system: CNC - Power [kW]: 18.5 - Press force [ton]: 175 - Max. working width [mm]: 3100 Lasdpfeyypfisx Apmjd - Column gap [mm]: 2500 - Backgauge depth [mm]: 600 - Max. stroke [mm]: 195 - Tools included: Yes - Transport dimensions: 4000mm x 2300mm x 2850mm (l x w x h) - Transport weight [kg]: 10520kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

See details

Listing

Staufenberg

1,199 km

Press brake
DURMAAD-SERVO 30175

Call

Condition: new, Year of construction: 2024, functionality: fully functional, Discover the powerful Durma press brake at our demonstration center in Saerbeck. As a manufacturer, we offer you maximum precision and efficiency with a capacity of 3050 mm in length and 175 tons. Benefit from our comprehensive all-in-one service: We take care of transportation, installation, commissioning and offer you a one-year warranty as well as fast and reliable service. Visit us and see the quality and versatility of this first-class machine for yourself. Standard equipment Capacity (length - ton) 3050mm - 175t Installation height 530mm Outreach 450mm Stroke 265mm Servo drive Y1, Y2, X - 3 axles Control unit - DT 15 Manuel F. AKAS FPSC safety system CE-Fiessler Akas Servo motor backgauge & linear guide & Ball screw system Manual crowning Laodpfxetr Dk Ee Apmjd European tool holder Sliding front arms Options - DELEM 69S control unit (3D control) -Motorized crowning - 6 axes X=650mm Y1, Y2, X ,R , Z1, Z2 (6 axes controlled press brake) press brake) -Lower tool European M.460R.85 -European upper tool P135.75.R08

See details

Listing

Saerbeck

1,076 km

Press brake
DURMAAD-S 30320

Call

Condition: new, Year of construction: 2024, Bending force: 320 t Year of manufacture: New (delivery time 6-8 weeks) Control system: DT 15 Bending length: 3050 mm Distance between columns: 2600 mm Y rapid traverse speed: 160 mm / s Y working speed: 10 mm / s Y return speed: 140 mm / s Motorized crowning Table length: 630 mm Table width: 154 mm Table height: 900 mm Stroke: 365 mm Overhang: 410 mm 2 support arms 2 rear stop fingers Travel speed X-axis: 250 mm / s R-axis working speed: (max.) 140 mm / s R-axis travel: 250 mm Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminum) D-BEND software for 3D bending simulation and alignment Manual crowning R-axis, manual Motorized rear stop with linear guide and ball screw Rear stop finger with height adjustment (R-axis, manual) CE upper tool holder system (upper tools) Front support arms for sheet metal, sliding (with T-slot and stops) Hydraulic blocks and valves in special design, in accordance with worldwide applicable standards Electrical equipment, in accordance with worldwide applicable standards Option: CE standard with manual Fiessler AKAS II M -FPSC-B-C (SAFETY PLC) CNC motorized crowning Y1, Y2, X, R (4-axis) CNC motorized crowning Lsdpjfifg Hofx Apmsad Motor power 37 kW Oil tank capacity 250 liters Length 4300 mm Width 1820 mm Height 3230 mm Weight approx. 17250 kg

See details

Listing

Press brake DURMA Abkantpresse AD-S 30175

Staufenberg

1,199 km

Press brake
DURMAAbkantpresse AD-S 30175

Call

Condition: new, Year of construction: 2024, pressing force: 175 t, working width: 3,050 mm, A high-performance DURMA press brake type AD-S 30175 is for sale. With its extensive standard equipment and selected options, it is ideally equipped for the demanding tasks involved in metal processing. Standard equipment: Capacity and size: 3050mm x 175 tons Installation height: 530mm Projection: 450mm Stroke: 265mm Axis control: Precise control with 4 axes. Safety systems: Manuel F. AKAS FPSC safety system, CE F.AKAS BVLT light barriers and safety cages provide maximum protection. Backgauge: Servo motor backgauge & linear guide & ball screw system for maximum precision. Tool clamping system: European standard for fast and safe tool changes. Lodpfsrx Rkujx Apmead Front arms: Movable, supports the handling of different workpiece sizes. Selected options: Control unit upgrade: SKY 22 - 3D, for even more detailed bending operations and 3D visualization. Crowning: Motorized adjustment, for even more precise bending results. Backgauge: Extended with motorized X, R-axis backgauge (X=650mm), increases flexibility and precision. Quick clamping: Manual quick clamping for more efficient tool changes. This DURMA press brake is ready to support your production with its advanced technology and reliable performance. It is the ideal choice for companies that value precision, efficiency and safety. For more information or if you are interested, please contact us. Don't miss the chance to expand your production capacity with this high-quality machine.

See details

Listing

Press brake tool for Trumpf Cnstamp 86 degree H256mm Trumpf Punch

Nanjing

9,285 km

Press brake tool for Trumpf
Cnstamp86 degree H256mm Trumpf Punch

Call

Listing

Germany

1,293 km

Parts Cleaning System
MafacElba

Call

Year of construction: 2005, condition: ready for operation (used), Tank capacity: 775l, max. batch weight: 100kg, heating capacity: 26kW, max. temperature: 75°C, basket dimensions X/Y/Z: 660mm/480mm/338mm, fine filtration tank 1/2: 100µm/50µm. Machine dimensions X/Y/Z: approx. 1850mm/1400mm/1800mm, weight: approx. 950kg. The machine was overhauled in 2024 and has not been used since. Including basket rotation with swivel drive, automatic water filling and oil separation with coalescence separation unit and oil collection container. Documentation available. On-site inspection is possible. Lsdpfx Aswr Dxhepmead

See details

Listing

Dinkelsbühl

1,378 km

Press brake
Dener AbkantpresseXL30135

Call

Condition: new, Comparable to Durma, Baykal, Ermaksan, etc. Bending length: 3,020 mm Pressing force: 135 t Approach speed: 140 mm/s Bending speed max.: 10 mm/s Return speed: 130 mm/s Stroke: 320 mm Installation height: 550 mm Throat depth: 450 mm X-axis travel: 750 mm X-axis speed: 300 mm/sec R-axis travel: 250 mm R-axis speed: 100 mm/sec Clear distance between frames: 2,555 mm Machine length: 3,730 mm Machine width: 2,300 mm Total height: 2,850 mm Table height: 900 mm Motor power: 15 kW Ljdpjq Rdtqsfx Apmoad Oil tank: 190 l Machine weight: 9,500 kg (Technical data may vary depending on equipment) Standard features: - 3 CNC axes (Y1, Y2, X) - Double-guided, stable, and precise ram - Robust, double-guided backgauge - Manually adjustable, double-guided stop fingers on linear guides - Adjustable front support arms with height adjustment - Lateral and rear safety covers - Lower die adapter rail, 60 mm - Manual upper tool clamping system (Promecam system) - Manual crowning - Foot switch with emergency stop - 380 V, 50-60 Hz, 3-phase - LED lighting Recommended options: - Dener DA 66T control - Fiessler AKAS 2M laser finger protection - FPSC Safety PLC (manual) - X and R axes with servomotors - CNC crowning for high bending accuracy - 2 additional stop fingers - Other working lengths and thicknesses available with suitable accessories! -

See details

Listing

Press brake tooling Cnstamp Hemming tool for Lvd/Trumpf

Nanjing

9,285 km

Press brake tooling
CnstampHemming tool for Lvd/Trumpf

Call

Listing

Metal Gringing & Edge Rounding Machine NS Maquinas DM 1100 ZC - NEUMASCHINE

Dietzenbach

1,231 km

Metal Gringing & Edge Rounding Machine
NS MaquinasDM 1100 ZC - NEUMASCHINE

Call

Condition: new, DM1100 ZC are metal deburring and edge rounding machines for metal sheet and parts cut by punching, shearing, laser or plasma. Removing burrs and creating round edges using cross belts technology is possible on parts up to 1100mm width and on some as small as 50x50mm. Inside and outside contours of stainless steel, steel and aluminum parts cut by laser or other thermal processes are burrs cleaned from the total surface. Technical Details - DM1100 ZC: Working capacity (mm) 1100x100 No. belt stations (Z) 1 No. cross belt stations (C) 1 Abrasive belt dimensions (mm) 1100x2200 Abrasive belt speed (m/s) 10 Cross belt speed (m/s) 8 Lasdpod Hintjfx Apmed Feeding speed (m/m) 0.9-13 Abrasive belt motor per head (kW) 18.5 Cross Belt Motor (kW) (2x) 3 Feeding motor (kW) 0.37 Total power (kW) 26.22 Consumption (A) 55 Dust extraction connection per head (Ø mm) (2x) 150 Dimensions (mm) 2230x2300x2250 Weight (kg) 3300

See details

Advertise here

Press brakeDurma AD-Servo 30175

Machine data

Price & Location

Details about the offer

Description

Seller

Send inquiry

Telephone & Fax

Press brake
Durma AD-Servo 30175