Linde l 16 for sale

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
6
Vehicle data - make: Linde - type: H16T-01 / / HH 6.470 mm / Sideshift / triplex / good condition - drive type: gas - load capacity: 1600 kg - load Centre of gravity:-lifting height: 6470 mm - range: 0 mm - built: 2013 - operating hours: 13181- Internal No.: E0429 _ Zjoz0wld Mast data - mast type: triplex - lifting height: 6470 mm - height: 2830 mm - free lift: 0 mm - carriage: 0 mm - forks: 1200 x 0 x 0 mm _ Dimensions - length: 0 mm - width: 0 mm - height: 2830 mm - weight: 3075 kg _ ... more
6
Vehicle - Make: Linde - Type: E 16-02 EVO Triplex - Drive type: Electric - Load capacity: 1600kg - Load center: 500 - Lifting height: 4625 mm - Reach: 0 mm - Built: 2015 - Engine hours: 3116 - Internal No:: FF1095 _____ Mast data - Mast type: Triplex - Lifting height: 4625 mm - Height: 2121 mm - Free stroke: 1519 mm - Fork carrier: 980 mm - Forks: 1100 x 80 x 40 mm _____ Dimen... more
4
Electric drive type Lifting capacity 2000 kg Load Centre 600 Available immediate Visually good condition Technically good condition Mast type any Forks length 1600 mm Bfaa3nu38a Tyres front type unknown Tyres front State rear tyres type unknown Rear tyres condition description > fork length 1600 mm more
3
Vehicle - Make: Linde - Type: T 20/1152 Fork tines 1600mm - Drive type: Electric - Load capacity: 2000kg - Load center: 600 - Lifting height: 0 mm - Reach: 0 mm - Built: 2013 - Engine hours: 6219 - Internal No:: 4811 _____ Mast data - Mast type: - Lifting height: 0 mm - Height: 0 mm - Free stroke: 0 mm Bfetgvocu9 - Fork carrier: 0 mm - Forks: 1600 x 560 x 0 mm _____ Dimension... more
14
A well maintained Linde L16 electric stacker from year 2010 is being sold. The device was checked by a dealer. Mast is triplex mast with full free lift. Load of the device is 1600kg. Device is equipped with 850mm forks for increased maneuverability. The device is in a very good condition and comes from the stock of a large group from the Munich area. No repair traffic. Hydraulic sealing. Battery 2010 with approx. 72% remaining capacity (C5 test) Drive wheels / rollers ok. Technical data: ... more
5
Hydraulic cylinders, support cylinders, hydraulic stamps, pressure stamps -Cylinder s 50 mm -Piston rod of 32 mm Vqlrhe -Pipe . . . . . . . . . . . . -Stroke 260 mm -Total length retracted 470 mm -Mounting bore of 25 mm -Ideal for building a hydraulic press -4x present -Price piece -Weight 8 kg/piece more
6
Vehicle data - make: Linde - type: T 16 / / 4022 STD easily operable - propulsion: electric - load capacity: 1600 kg - load Centre of gravity:-lifting height: 0 mm - range: 0 mm - built: 2012 - operating hours: 4022 - internal No.: C0013 _ _____ Mast data - mast type:-lifting height: 0 mm - height: 1350 mm - free lift: 0 mm - carriage: 0 mm - forks: 1150 x 0 x 0 mm _ Dimensions - length: 500 mm - width: 720 mm - height: 1350 mm - weight: 720 kg _ 3u37oinhz Batter... more
6
Vehicle - Make: Linde - Type: E 16-02 EVO Triplex - Drive type: Electric - Load capacity: 1600kg - Load center: 500 - Lifting height: 4625 mm - Reach: 0 mm - Built: 2014 - Engine hours: 12001 - Internal No:: FF1096 _____ Mast data - Mast type: Triplex - Lifting height: 4625 mm - Height: 2121 mm - Free stroke: 1519 mm - Fork carrier: 980 mm - Forks: 1150 x 100 x 40 mm _____ Dim... more
10
Drive type Electric Load capacity 1600 kg Load center of gravity 500 Available at short notice Condition visually very good Condition technically very good Mast type Duplex Lifting height 3145 mm Free stroke 1518 mm Forks length 1200 mm Attachments Clamping forkSide sliderZinc adjuster Attachments Description Rotary fork clamp Optional equipment 3. Valve4. ValveWork headlights rearfrontfrontwork headlightsHeatingFull cabinFull free stroke Special equipment Description Single pedal, flash light W... more
12
two-shaft shredder Dimensions in mm, LxWxH: 5000 x 2050 x 1200 cutting size: 1850 mm x 1400 mm Knife discs -width: 74 mm (new armour-plated) Hydraulic motors: 2 radial piston motors HÄGGLUNDS 1 x type: MA 200 1 x type: MA 400 Weight shredder, without hydraulic unit: 20 tons HYDRAULIK drive: Mucmgw max. operating pressure: 400 bar Drive motors: 2 x 132 kW High pressure pumps: axial piston pumps Dimensions in mm,LxWxH: 2850 x 1100 x 2350 Weight without fuel tank: approx 4000 kg Tan... more


linde l 16
daily

New machines via email!

Stay updated!
9
For sale a reconditioned Linde E16 electric forklift from year of 1998. max cap of the device is 1600kg. Mast is a triplex which lifts 5.5m. With full free lift and attached side slide. The fork length is 1200mm. The device is in a very good condition. No repairs needed.. Hydraulic tight. Fully serviced. Battery in good condition. Battery maintenance was carried out by a specialist. Battery built in 2010 with a residual capacity of approx. 89% (C5 test). This is the big 48V battery. Techn... more
4
Synchronous cylinder, hydraulic cylinders, steering cylinder Piston diameter 38 mm 9biownvs8 Piston rod ø 16 mm (M12 thread) Hub 20 mm dimensions 234/89/H50 mm Weight 3 kg more
6
Vehicle data - make: Linde - type: T 16 / / 4734 STD facilitates transport operations - drive type: electric - load capacity: 1600 kg - load Centre of gravity:-lifting height: 0 mm - range: 0 mm - year: 2011 - operating hours: 4734 - internal No.: C0014 _____ Mast data - mast type:-lifting height: 0 mm - height: 1350 mm - free lift: 0 mm - carriage: 0 mm - forks: 1150 x 0 x 0 mm _ Dimensions - length: 500 mm - width: 720 mm - height: 1350 mm - weight: 7... more
6
Vehicle data - make: Linde - type: H 16 D-01 triplex cabin - drive type: diesel - carrying capacity: 1600 kg - load Centre of gravity: 500 - lifting height: 5475 mm - range: 0 mm - year: 2011 - operating hours: 6297 - internal No.: FF1048 _ _____ Ju9iwu Mast data - mast type: triplex - lifting height: 5475 mm - height: 2471 mm - free lift: 1869 mm - carriage: 980 mm - forks: 1200 x 80 x 40 mm _ Dimensions - length: 0 mm - width: 0 mm - height: 2471 mm - weight: 0 kg _ ... more
1
16 2/3" cross cutting/cross perforation cylinder for Bielomatik P631/668/671 reel collator used, complete with gear Mm0yb and fixing bars will be cleaned before delivery more
1
-Emergency power generator 160 kVA, 128 KW -with KHD Deutz engine, type F10L413 F Szbbm9kx more
6
Vehicle - Make: Linde - Type: E 16 PH-01 Triplex STVO Battery 2016 - Drive type: Electric - Load capacity: 1600kg - Load center: 500 - Lifting height: 4950 mm - Reach: 0 mm - Built: 2010 - Engine hours: 11769 - Internal No:: FF1098 _____ Mast data - Mast type: Triplex - Lifting height: 4950 mm - Height: 2215 mm - Free stroke: 1735 mm - Fork carrier: 980 mm - Forks: 1200 x 100 x 40 mm _____... more
1
for continous forms reel collator for Bielomatik P631/668/671 reel collator we offer used cross cutting/cross perforation cylinder: 2keoqe9p9 16" cross cutting/cross perforation cylinder for Bielomatik P631/668/671 reel collator used, complete with gear and fixing bars will be cleaned before delivery more
6
Vehicle -Factory: Linde Type: E 16 P-01 Triplex -Drive type: Electric -Load capacity: 1600kg -Load focus: 500 -Lift height: 4625 mm -Range: 0 mm -Built: 2010 -Engine hours: 3999 -Internal No.: FF1072 _____ Mastast data -Masttype: Triplex -Lift height: 4625 mm -Construction height: 2120 mm -Freihub: 1519 mm -Fork carrier: 980 mm -Forks: 1200 x 100 x 40 mm _____ Dimensions -... more
1
for continous forms reel collator for Bielomatik P631/668/671 reel collator we offer used cross cutting/cross perforation cylinder: 16.5" cross cutting/cross perforation cylinder 2keozwfea for Bielomatik P631/668/671 reel collator used, complete with gear and fixing bars will be cleaned before delivery more
6
Nail series: 34° paper magazineed strip nails Wire diameter: 3.8 - 4.6 mm Nail lengths: 100 - 160 mm Working pressure: 5 - 8 bar Weight: 7.10 kg Magazine capacity: 72 nails Bfeqbk8j0l more
2

Bed type Correa Bed type milling machine CORREA A25/50 - 9252316A25/50

Burgos, SpainSpain dealership location
6032 km
1990
ready for operation (used)
Retrofitted: 2019 Numerical control: HEIDENHAIN TNC-320 (¡NUEVO! / NEW!) Technical features Dimensions Table dimensions: 5000 x 1000 mm Number of T slots: 7 T slots dimensions: 22 mm Traverses of axis X axis traverse (mm): 5000 Y axis traverse (mm): 1200 Z axis traverse (mm): 1000 Milling head Head... more
2
Make Drais, Type HT-160, No 51.002, New 1982, Material Stainless steel, Paddle dryer (1x), Capacity 160 Ltr, Trough sizes dia. 600x670mm, Inlet dia. 250mm, Outlet dia. 105mm, With jacket , Working pressure unknown, Max. temperature unknown, Motor 22,0 KW, 400/690 Volt (Ex) - BRAND NEW MOTOR, With lump breaker (1x). Lump breaker speed 1450/2925 Rpm, Motor 14,0/17,0 KW, 380 Volt (Ex), Extra Specifications - With various spare mixing shafts -- RECONDITIONED -- What you can expect from Foeth: all ou... more
6
Vehicle data - make: Toyota - type: 8FBET16 / / HH 3,300 mm / FH 1.600 mm / duplex / Sideshift / container capable - drive type: electric - load capacity: 1600 kg - load Centre of gravity:-lifting height: 3300 mm - range: 0 mm - year: 2013 - operating hours n: 8327 - internal No.: E0506 _ Beilk7lgmd Mast data - mast type: duplex - lifting height: 3300 mm - height: 2120 mm - free lift: 1600 mm - carriage: 0 mm - forks: 1400 x 0 x 0 mm _ Dimensions - length: 0 mm - width: 0 mm - height: 212... more
6

cycle lathe CHEVALIER FCL-2160H

Bochum, GermanyGermany
6398 km
2018
as good as new (ex-display)
look at pdf "technical data & equipment" Gr7ys0q more
10

Lathe Weiler Praktikant 160B

Ubstadt-Weiher, GermanyGermany
6595 km
1990
refurbished (used)
Weiler Intern 160B Precision lace lathe 3- Axis digital display Ditron NEW. Refurbished with acceptance protocol for tolerances of new machines 6 months warranty !! Technical data: Built 1990 Machine No.90 160 2094 Tip height 160 mm Tip width 650 mm Spindle speeds: from 24 to 2500 rpm Spindle passage 40 mm Short cone spindle head DIN 55027 size 5 with bayonett closure - Tailstock MK 3 Feeds from 0.02 to 0.63 mm /U Possible thread metric, inch, module and diametric pitch M... more
5

Plate Shear - Hydraulic DARLEY GS 3660 x 16

Niederlangen, GermanyGermany dealership location
6338 km
1975
used
sheet width:3700 mm plate thickness:16 mm Netcl distance between columns:3860 mm throat:100 mm back stop - adjustable: mm down holder:12 Stk. total force of the downholder:24000 kg oil volume:ca. 500 l total power requirement:30 kW weight of the machine ca.:ca. 11,0 t dimensions of the machine ca.:4,5 x 2,5 x 2,5 m Max. Sheet thickness stainless steel: 12mm Cut gap adjustment: 0-16 mm - Machine has a back gauge adjustable from the front. - cut line lighting more
13

Bed type Correa Milling machine CORREA A16 - 9681305A16

Burgos, SpainSpain dealership location
6032 km
1987
ready for operation (used)
Retrofitted: 2019 Numerical control: HEIDENHAIN TNC-320 (¡NUEVO! / NEW!) Technical features Dimensions Table dimensions: 2000 x 630 mm Number of T slots: 6 T slots dimensions: 18 mm Traverses of axis X axis traverse: 1800 mm Y axis traverse: 800 mm Z axis traverse: 800 mm Milling head Head type: Un... more
2
Make Drais, Type HT-160 A, No 50561, New 1981, Material Stainless steel 1.4571 (316Ti), Turbulent dryer (1x), Capacity 160 Ltr, Trough sizes dia. 505x900mm, Inlet dia. 300mm, Outlet dia. 125mm, Working pressure vac/6 bar, Test pressure 7,8 bar, With jacket (18 Ltr), Trough sides jacketed (2,7+1,5 Ltr), Working pressure 6 bar, Test pressure 9,1 bar, Max. temperature 200 Degr. C., With mechanical seal , Motor 12,0 KW, 380 Volt (Ex), Floorspace 4,6x1,3 M (in open position), Total height 2,2 M (with... more
6
Vehicle data - make: Linde - type: L 10 / / 1917 STD scale versatile and agile - drive type: electric - load capacity: 1000 kg - load Centre of gravity:-lifting height: 2520 mm - range: 0 mm - year: 2004 - operating hours: 1917 - internal No.: A0350 _____ Mast data - mast type: standard - height: 2520 mm - height: 1680 mm - free lift: 0 mm - carriage: 0 mm - forks: 1150 x 180 x 60 mm _ Mofah Dimensions - length: 0 mm - width: 0 mm - height: 1680 mm - ... more
4

coil line KOHLER 50.400/9.3000.1 H WVE 160/400

Eislingen, GermanyGermany dealership location
6689 km
1992
used
material width:400 mm coil weight:3,0 t material thickness:0,5 - 4,0 mm coil internal diameter:460 - 530 mm coil external diameter:1500 mm no. of straightening rolls:9 straightening roll diameter:50 mm no. of lower support rolls:12 no. of upper support rolls:10 diameter of support rolls:90 mm Xtcu3f7u material cross-cut:1600 mm² speed of coil line:0 - 20 m/min power requirement:35,0 kW weight:10,5 t dimensions (WxDxH):10,0 x 2,5 x 2,9 m straightening machine:KRE 50.400/9 driven straightenin... more
3
used injection moulding machine full-electric Krauss Maffei Type: KM 160 - 1000 EX Controller: MC5 Operating hours: 44,300 h Year of construction: 2009 clamping unit Distance between bars: 520 x 520 mm Clamping force: 1600 kN/160 to. Opening stroke 450 mm Tool height min 300mm/ max 550 mm max. plate spacing 1000 mm Mounting plates: 830 (v) x 800 (h) mm Ejector stroke: 150 mm i... more
5

Injection moulding machines ENGEL DUO ES 160505/3200

Kaiserslautern, GermanyGermany dealership location
6526 km
2003
ready for operation (used)
Injection Unit Screw diameter 135 mm Injection pressure 1643 bar Plasticising rate max 138,00 g/sec (PS) Screw speed 10 U/min Clamping Unit Clamping force 32000 kN Distance between bars 2240 x 1800 mm Additional Equipment KUKA KR150L 110K Bfgnel9uhl This ENGEL DUO ES 160505/3200 Injection Moulding Machine was manufactured in Germany and has been working for approximately 82498 hours. This powerful machine incorporates a clamping force of 32000 kN. A KUKA KR150L 110K robot is included as well... more
6
7x Identical resistance welding machine Dalex PMS 16-4 Bfgrzc0ls8 more
2
Make Hermann Linden Maschinenfabrik, Type LPMD-2, No 1555, New 1991, Material Stainless steel, Pan material Stainless steel 1.4401 (316), Planetary mixer /dissolver (1x), Motor 1,1 KW, 220/380 Volt, With variable speed drive , Speed scraper variable, Motor scraper 0,55 KW, 220/380 Volt, With cover , Working pressure vacuum, With pan , Capacity 2 Ltr, Pan sizes dia. 160x110mm, With jacket , With switch , Floor space 1,0x0,7 M, Total height 1,8 M, Weight 440 KG What you can expect from Foeth: all ... more
6
Vehicle data - make: Linde - type: T16 / / 3.926 STD / integrated charger / year 2013 - propulsion: electric - load capacity: 1600 kg - load Centre of gravity:-lifting height: 0 mm - range: 0 mm - year: 2013 - operating hours: 3926 - internal No.: E007 9 _ Mast data - mast type:-lifting height: 0 mm - height: 1550 mm - free lift: 0 mm - carriage: 0 mm - forks: 1150 x 0 x 0 mm _ Dimensions - length: 0 mm - width: 0 mm - height: 1550 mm - weight: 525 kg _ Battery & charger - battery volta... more
4
pressure:315 t distance between columns:1660 mm stroke:400 mm Distance table/ram, stroke up:600 mm Table surface area:1600 x 1000 mm table height over floor:960 mm Die cushion pressure in table:80 t Die cushion stroke in table:200 mm Die cushion area in table:950 x 650 mm Betu7clxvk Side window:720 mm Ram surface:1600 x 1000 mm Oil volume:1400 l Power capacity:57,0 kW Weight:30,0 t Dimensions (WxDxH):2,7 x 2,9 x 4,5 m die cushion in table:hydraulic more
4
(see axe. Description) Nn77z more
1

Fine Blanking Press FEINTOOL GKP 160

Niederhelfenschwil, SwitzerlandSwitzerland dealership location
6717 km
1975
used
pressure 50 t plate thickness mm no of strokes 72 Hub/min ----- PRESS DESIGN Jvcpey - drive system: knuckle-joint SLIDE - total force (nominal) 50 to - stroke 50 mm - stroke rate (max.) 72 /min TOOL DIMENSIONS - lower table (left-right) 430 mm - shut height max. 230 mm more
14

Injection moulding machines ENGEL Victory 650/160 Spex

Kaiserslautern, GermanyGermany dealership location
6526 km
2011
ready for operation (used)
General Data Machine weight 8900 kg Control Unit Brand ENGEL Model CC200 Injection Unit Screw diameter 45 mm Stroke volume 318 Injection pressure 1521 bar Screw speed 280 1/min Clamping Unit Clamping force 1600 kN Opening stroke 607 mm Ejector stroke 150 mm Ejector force for / back 61 kN Fk3nznf This ENGEL Victory 650/160 Spex Injection Moulding Machine was manufactured in 2011 in Germany. It has been working for only 9024 hours. It is operated with an Engel CC200 control unit. This machine... more
2
Make Thaletec ( D ), Type BE 2500-1600 AM-D80, Lining material Glass - Enamel, Reactor , Extra Specifications 3.550 Liter total volume, glass-lined steel, with anchor agitator, Agitator Type TRD 300/7,5 kW-ST with 62 rpm, internal P= -1/6 bar, -60/1oo·c, jacket -60/200°C, Fabrik # 631444, new in 2011, with CE 045, and ATEX Zone 1 inside and outside, II2GDcT4, Interseal Lip seal on shaft type ARF-DO-E-LO/80 DVSLA, HEW motor 7,5 kW, SEW drive , with 4 legs What you can expect from Foeth: all our... more
6
Vehicle data - make: Toyota - type: 8FBET16 / / HH 3,300 mm / FH 1.600 mm / duplex / Sideshift / container capable - drive type: electric - load capacity: 1600 kg - load Centre of gravity:-lifting height: 3300 mm - range: 0 mm - year: 2013 - operating hours n: 8788 - internal No.: E0443 _ Mast data - mast type: duplex - lifting height: 3300 mm - height: 2120 mm - free lift: 1600 mm - carriage: 0 mm - forks: 1400 x 0 x 0 mm _ I9hmag99e Dimensions - length: 0 mm - width: 0 mm - height: 2120... more
4
- 2 feed rollers - 2 speeds 1400/2800 rpm. - 250/450 W / 400 V Ptz3rm more
7
Used mobile suction Int. Article. N° m2783 Manufacturer Multi-Sauger Type MS 160 D2gskxv Volume flow 2,300 m3/h Operating voltage 380 volts Power 1.5 kW Speed 2,840 rpm Item location: 58730 Fröndenberg/Ruhr The machine can be visited and tried out under electricity. A forklift/crane for loading is available. It is possible to examine the items for sale, suburban expertly. Specific issues should be clarified in advance. The information, such as technical data, dimensions, ye... more
3

KESSEL-RADIALBOHRMASCHINE COLLET BU 1600

Bruchsal-Büchenau, GermanyGermany
6593 km
1980
excellent (used)
KESSEL-RADIALBOHRMASCHINE COLLET BU 1600 - 02-06-011 Lieferzeit: sofort Nummer: 02-06-011 Hersteller: Collet Typ: BU 1600 Z3de8rsu MASCHINENDATEN Baujahr: ca. 1980 L x B x H: ca. 3500 x 1200 x 3000 mm Gewicht: ca. 5000 kg Sehr Guter Allgemeinzustand TECHNISCHE DATEN KESSEL - RADIAL - BOHRMASCHINE Max. Bohrdurchmesser in Stahl: ca. Ø 52 mm Max. Bohrdurchmesser in Guss: ca. Ø 60 mm Werkzeugaufnahme: MK 5 Drehzahlbereich: ca. 20 - 1000 U/min Ausladung: ca. 1600 m... more
2
Make Buehler GmbH , Type CALYPSO SKV-1600, No 20 352 717, New 1993, Material Mild steel, Roll breaker , Roll sizes dia. 250x1600mm, Fluted rolls , Inlet 1600x150mm, Outlet 1000x140mm, Motor 1x 22 KW, 400/690 Volt, 1x 37KW, 400/690 Volt, Feeding by metering roll , Motor 0,37 KW. 220/380 Volt, With switchgear , Floorspace 4,0x1,1 M, Total height 2,5 M, Weight 5400+1750+450 KG, Extra Specifications Met uitvoerschroef 22 KW, 400/690 Volt Incl. 4 nieuwe walsen What you can expect from Foeth: all our ... more
6
Vehicle data - make: Linde - type: T20 / / 1101 STD shaft position determines the speed - drive type: electric - load capacity: 2000 kg - load Centre of gravity:-lifting height: 0 mm - range: 0 mm - year: 2011 - operating hours: 1101 - internal No.: C0329 _ 8zbq7cfaw Mast data - mast type:-lifting height: 0 mm - height: 1450 mm - free lift: 0 mm - carriage: 0 mm - fork: 950 x 0 x 0 mm _ Dimensions - length: 0 mm - width: 0 mm - height: 1450 mm - weight: 625 kg _ Battery & charger - ba... more
6

Single column - eccentric press RICHTER - IWK - PELS PEKRD 160

Hessisch Lichtenau, GermanyGermany dealership location
6567 km
1968
used
Single column - eccentric press judge - IWK - PELS type PEKRD 160 Fabr. No. 3 / 20823 built in 1968 Pressure 160 ton. Table surface 1200 x 800 mm Plunger area 1000 x 700 mm Throat depth 440 mm Stand band-width rear 890 mm Stroke adjustment 8-180 mm Tappet adjustment 130 mm Mounting height approx. 550 mm (without intermediate desktop) Clamping pin hole ø 50 mm with clamp Table height above floor 910 mm (with table plate) Stroke rate 55 strokes/min. Need for compressed air 6 bar 14 k... more
4

Lathes Colchester Mascot 1600 Colchester Mascot 1600

Birmingham , United KingdomUnited Kingdom dealership location
5775 km
ready for operation (used)
Be97zy9wxv COLCHESTER MASCOT 1600  17″ x 40″ GAP BED CAPACITY.  3 & 4 JAW CHUCKS.  QUICK CHANGE TOOL POST PLUS HOLDERS.  DUAL IMPERIAL & METRIC DIALS.  3″ SPINDLE BORE.  SWING OVER CROSS SLIDE : 10 1/2″  SWING IN GAP : 28″  Anilam Dro  16 SPINDLE SPEEDS, 20 – 1600 RPM.12.5 HP (9.3kw) MOTOR. more


linde l 16
daily

New machines via email!

Stay updated!

to

to

Edit search
LINDE L 16
SELL IMMEDIATELY
with the world-wide market leader from 0,79 EUR per listing.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our app for used machines now!
Machineseeker app for iPhone and Android.