Tapping Machine

DUMETA D-JS-22A

Condition: excellent (used), Year of construction: 1997, Heidenhain Mill-Plus control system Gjdpfxovu Slpj Abbskd Travel paths X/Y/Z: 500 x 380 x 380 mm Clamping surface 500 x 400 mm Tool magazine for 24 tools, SK 40 Speed 8,000 min-1 NC rotary and swivel table Chip conveyor

Condition: new, Year of construction: 2025, table length 4000 mm table width 2000 mm table height 200 mm weight 2400 kg Manufacturer: GERD WOLFF Technical Details: • Length 4000 mm • Width 2000 mm • Height 200 mm • Weight 2400 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 8 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 • 2400 x 1200 x 200 Gkodouia I Nspfx Abbod Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Condition: new, functionality: fully functional, Year of construction: 2024, laser power: 6,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, workpiece weight (max.): 800 kg, overall weight: 5,000 kg, total length: 5,000 mm, total width: 2,500 mm, total height: 2,200 mm, warranty duration: 12 months, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, working range: 3,000 mm, With the OR-S1530, Oree Laser offers a compact and easy-to-operate laser cutting system in large format. Our company, SF-Tech Engineering GmbH, is the Swiss representative of Oree Laser. All machines are newly imported and assembled according to customer requirements. We also provide training and service. In our showroom you can test the OR-S1530 including all accessories (high pressure compressor, suction system...). Technical data Working area: 3060mm X 1530mm External dimensions: L:4950, W:2300, H:2130 Weight: approx. 4'500kg Positioning accuracy: 0.03mm Max. Cutting speed: 115m/min Maximum acceleration: 0.8G Laser power: 6000 Watt Laser source: MAX Cutting head: Raytool or BOCI Fume extraction: Zone controlled fume extraction The side machine door can be easily raised or lowered at the touch of a button. The total height of the machine is 2200mm. The work table can be easily pulled out of the side of the machine by hand. This enables safe and fast loading and unloading of the machine. There are two new variants: 1st variant, a 60% extension table, without support on the floor, max. 800kg load. 2nd variant, a 120% extension table, with fold-out arms, max. 900 kg load. Godpjr D N Dzofx Abbokd Do not hesitate to visit us in our showroom in 6281 Hochdorf.

Condition: new, Year of construction: 2024, SEMI-AUTOMATIC DRILLING RIG “UNIBORFIX 50” With the UniBohrFix 50 drilling system, all profiles can be machined against a stop or with grippers. The Drilling is done manually using the lever, with the materials on the X-axis automatically pointing to the drive to the next drilling position. Easily drill entire programs or work with the stop plate quickly carry out individual drillings. The system is suitable for weights up to 100 kg. The facility also contains a minimum quantity spray unit with holder and spray can. The technical data of the standard version can be found in the table. If necessary, all components of the system can be adapted to your requirements. You can choose between different drilling machines, roller conveyors, select positioning systems and vices. Plantec configures the system so that it suits you perfectly! ADVANTAGES A sequence of holes is automatically executed at precise intervals. Potential operator errors are drastically reduced. Programming takes just a few minutes. Very good value for money. Significant reduction in manpower. Standard measuring lengths: 3,000mm 6,000mm Drill: Unimax 2 T Spindle MK2 Continuous drilling capacity 18 mm Speed ​​ranges: 100-2000rpm, 200-4000rpm Projection 225 mm Spindle/table distance 60-400 mm Gksdpfxsgwt Sle Abbod Adjustable vice with measuring linear display Positioning length stop: PD-100e control for automatic positioning Positioning: absolute or chain dimensions Easy to read LED display Trolley with DC servo motor Positioning accuracy +/- 0.1 mm/m Attachment arm with spring damping Stop plate with groove Memory control with 3,000 memory options Roller conveyors: RD-200/3 load capacity 200 kg/m Roll width 290 mm Roll diameter 40 / 50 mm insert sheets Struts for stabilization switch cabinet Available options: Minimum quantity spray system with spray head and holder Gripper tongs for clamping the material on the stop plate

Condition: good (used), Year of construction: 2005, operating hours: 84,564 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 17 kVA, controller manufacturer: iTNC 530 Heidenhain, controller model: iTNC 530 Heidenhain, total height: 2,500 mm, total length: 3,000 mm, total width: 3,000 mm, table width: 500 mm, table length: 650 mm, table load: 200 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 22,855 h, spindle motor power: 13,000 W, number of slots in tool magazine: 16, tool length: 300 mm, tool diameter: 130 mm, tool weight: 6 g, Equipment: rotational speed infinitely variable, The machine is in good condition. A few things have been redone and freshened up. The following has been overhauled: -Complete X-axis bearing including ball screw and bearing -Various hydraulic components -Tool changer reset and sensors replaced -New door switch installed -New discs installed (unfortunately already got some flying chips again) -New coolant pump -New screen, as it was defective -New handwheel HR410 The machine does not have many spindle hours or switch-on hours. The machine has never seen a series production and has always been operated sensibly. Warm-up programs etc. We are tool and mold makers, so we tend to do more complex contours rather than heavy machining. I am only selling this because I need a simultaneous machine and also more travel paths. Technical data: Year of manufacture 2005 Gksdpfx Abjvtnm Hsbod x-travel 500 mm y-travel 450 mm z-travel 400 mm Control iTNC 530 Heidenhain Main spindle Speed range - main spindle 20 - 10,000 rpm Drive power - main spindle 9 / 13 kW Torque 57 / 82 Nm Tool holder SK 40 Rotary table Table clamping area 630 x 500 mm Swivel range -5 / +110 ° Max. table load 200 kg T-slots 14 H7 T-slots - distance 63 mm C-axis +/- 360 ° Feeds: Rapid traverse (X / Y / Z) 12 m/min Feed rate 10,000 mm/min Tool changer: Tool positions 16 pos. Max. tool weight 6 kg Max. tool length 300 mm Max. tool diameter 80 mm Max. tool diameter with free adjacent box 130 mm Tool holder SK 40 Total power requirement 17 kVA Machine weight approx. 3.6 t Space requirement approx. 3.0 x 3.0 x 2.5 m Tool milling machine - Universal DECKEL MAHO - DMU 50 Attention: no chip conveyor and no automatic measuring probe! - 5 axes (3+2) - WITHOUT tools Attached are pictures of the machine. The machine was intentionally not cleaned before taking the pictures, so it is in the "chip" and is used daily. You can also see the hours of the machine there. Kinematics and geometry are OK. for our needs, but could possibly be re-measured. We have never had any crashes etc.

Condition: new, table length 1200 mm Gksdped Iinfefx Abbsd table width 1200 mm table height 900 mm table load 3000 Kg weight of the machine ca. 0,32 t dimensions 1,2 x 1,2 x 0,9 m Welding table / hole table: Hole diameter: 28.3mm The table is made of 15mm thick, high-alloyed, plasma-nitrided steel S355J2 + N (St 52/3) Plasma nitriding provides a hard surface layer. height adjustable from approx. 880 - 980mm Bottom ribbed for reinforcement. including ground storage Accessories optional !!

Condition: good (used), Year of construction: 2004, operating hours: 66,000 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, table load: 200 kg, overall weight: 6,500 kg, spindle speed (max.): 18,000 rpm, Equipment: rotational speed infinitely variable, For sale is a CNC milling machine from the brand Deckel Maho, model DMU 50 eVolution. The machine is in good condition and fully operational. History: 2022: Spindle rebalanced, new rotary union and gear ring Geometry newly adjusted Technical data: Year of manufacture: 2004 Control: Sinumerik 840 D Powerline X-axis: 500 mm Y-axis: 420 mm Z-axis: 380 mm B-axis: 0-180° C-axis: 360° Power-on hours: 66,000 h Operating hours: 31,000 h Table dimensions: Ø 500 mm Max. table load: 200 kg Max. spindle speed: 18,000 rpm Spindle taper: SK 40 Rapid traverse X/Y/Z: max. 50 m/min Tool magazine: 60 positions Space requirements: 4,700 x 5,400 x 2,600 mm Weight: approx. 6,500 kg Gksdpfx Abowvuzzobsd Special equipment: - High-pressure coolant system - Band filter system - Chip conveyor - Automation flap, right side - Digital 3D touch probe - Blum laser measuring system Transport and loading can be organized Europe-wide on request and at an additional charge. Prices are subject to VAT. Inspection possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you wish to sell yours? For further information or contact options, please visit our website.

Condition: new, Year of construction: 2025, Airtech Stickstoff has been representing the Bodor Laser company in Germany for several years. Our well-rehearsed team of service technicians assembles the machines and ensures training in German language. You are interested in our laser cutting machines ? Then we are waiting for your inquiry... Godpfx Abjhk E Dvjbjkd

Condition: new, Year of construction: 2025, machine/vehicle number: 650462292, Additional options and accessories Gkedpfshd Nb Isx Abbod Notes MARINI IRON T-BOX 50 MOBILE ASPHALT MIXING PLANT Year of construction: 2021 Operating hours: New - Production capacity: 50 to./h. - CE Certificate - Mobile: 1x sea container 40' HC - Feed hopper: 3 - Capacity: 5 m³ - Drying drum: continuous - Burner: Marini CF 04 with 7,3 MW - Mixer: rotating - filter system: 180 m² filter area - control cabin with automatic and manual control system Marini - 1 year warranty Input errors and mistakes in this offer are expressly reserved. Only the concrete agreements in the order confirmation or in the sales contract are decisive. more construction machines and mixing plants on our website Further information Purpose: construction, Usable material: asphalt, General condition: very good, Technical condition: very good, Visual condition: very good,

Condition: new, 2021 Durma 15 kW Fiber Laser Make: DURMA Type: HD-F(L) 3015 Working range X-Y-Z: 3060x1530x160 mm Laser power: 15000 Watt IPG Control: Siemens Sinumerik 840D sheet thickness mild steel: 40 mm Sheet thickness stainless steel: 30 mm Sheet thickness aluminium: 30 mm Sheet size: 3048x1524 mm Loading weight: 200 kg/m² Speeds X-Y axes: 100 m/min. Speeds X-Y axes simultaneous: 280 m/min. positioning accuracy: +/- 0,05 mm Repeating accuracy: +/- 0,05 mm Installation area L/W/H: approx. 14500x7500x2420 mm weight: approx. 12000 kg Standard equipment Automatic pallet changer Control Sinumerik 840D Auto-focus cutting head Precitec Procutter F150 focus Automatic sheet position and sheet size measuring system Automatic nozzle cleaning Position laser diode Central lubrication Simple user interface parameter page (power-speed-pressure) External CAD/CAM programming software with autonesting optional Lantek software Work area lighting Warning light Multi-chamber exhaust system Special laser cutting options Remote maintenance Gksdogk Nlpjpfx Abbjd CE marking IPG fiber laser source 15000 Watt including cooler Extended equipment possible: Filter, compact dust collector Vanterm Motorized chip conveyor for small parts/waste Laser Service Set Cloud License Lantek Expert Inside Software Lantek software with positioning - laser diode with automatic sheet metal position detection, measurement Camera Inside Linear drive We will be pleased to send you further information on request.